Hi all, I tried the Mach64 and it gives me the following error atached in this mail. Thanks for any info, Paulo Henrique Quoting Steffan Baron ([EMAIL PROTECTED]): > > > > I cant get X to work. I installed Debian in 2 Sparc 4, 1 Sparc 5 and > >1 Sparc 20 before. All other machines I got X working. > > Had the same problems here ..... > > I guess it is up to the PCI-based hardware, Xsun24 is just the wrong > server ..... Solaris uses the M640 device, I guess it's a Mach64 based > chip but perhaps I am wrong (I am relatively new to Sparc Linux). If > I start the server directly I get a SEGV ..... > > regards, > Steffan >
XFree86 Version 3.3.3.1 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: January 4 1999 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: Linux 2.2.9 sparc64 [ELF] Configured drivers: Mach64: accelerated server for ATI Mach64 graphics adaptors (Patchlevel 0) (using VT number 7)
XF86Config: /etc/X11/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: rules: "xfree86" (**) XKB: model: "sun" (**) XKB: compat: "compat/complete" (**) XKB: types: "types/complete" (**) XKB: keycodes: "sun(type5)" (**) XKB: geometry: "sun(type5unix)" (**) XKB: symbols: "sun/us(sun5)" (**) Mouse: type: sun, device: /dev/mouse, baudrate: 1200 (**) Mouse: buttons: 3 (**) Mach64: Graphics device ID: "My Video Card" (**) Mach64: Monitor ID: "Sony Multiscan 17seII" (--) Mach64: Mode "1280x1024x76" needs hsync freq of 81.13 kHz. Deleted. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (--) Mach64: PCI: Mach64 GT rev 154, Aperture @ 0xe1000000, Registers @ 0xe0008000, Block I/O @ 0xc00100 (--) Mach64: Card type: PCI (--) Mach64: Memory type: SGRAM (5) (--) Mach64: Clock type: Internal (--) Mach64: Maximum allowed dot-clock: 200.000 MHz (**) Mach64: Mode "1152x900x76": mode clock = 108.000 (**) Mach64: Virtual resolution: 1152x900 (--) Mach64: Video RAM: 2048k (--) Mach64: Using hardware cursor (--) Mach64: Using 16 MB aperture @ 0xe1000000 (--) Mach64: Using 4 KB register aperture @ 0xe0008000 (--) Mach64: Ramdac is Internal (--) Mach64: Ramdac speed: 200 MHz (**) Mach64: Color weight: 565 Fatal server error: xf86MapVidMem: Could not mmap framebuffer (Invalid argument) xinit: unexpected signal 2