Jason Wright wrote: > I pulled one of my old pre-wvidal /etc/ppp/options out of mothballs and > I was able to run with the port speed set to 115200. Is there a way to > get wvdial to run at a higher speed on this machine?
My ZyXel TA128 runs at 460800 baud on my Ultra5, which is the maximum rate the TA itself can handle. I only use pppd and chat. My guess it that wvdial tries to set/negotiate the baudrate, as it probably should on a PC, with a limit of 115200 baud. You could try using wvdial as a chat replacement. Perhaps forcing the ttya/b-mode on the PROM, or with `eeprom`, might perhaps(?) help as well, if your modem supports the speeds you set it to. Good serial cabling is also very important at higher speeds, but that might be obvious :) Pieter