Hello David, > Olivier Bornet writes: > > > > My current configuration is a SunBlade 100 and a Ultra 10, both > connected to > > > > the same screen, a Sun 18.1" LCD. The problem is also present with > only the > > > > Blade. The Ultra 10 has no problem with the display. > > > > > > This may be the difference, as I have no LCD to test with. > > > > Seem not. I have just try with a Sun 19" CRT display. Same problem. And > maybe > > a little more bad : in console mode, the screen don't display anything, and > > the green LED near the power switch flash rapidly. I think this will say > > "refresh rates not supported". > > I think I know what may fix it, can you compile your own 2.4.x > kernels?
OK, now I'm ready to compile my own 2.4.x kernel. I have all the needed stuff, and allready have compile a standard 2.4.5 which boot correctly on the Ultra, but hang on the Blade (certainly a wrong choice for the Video Card) when starting X. Can you send to me which test I can make ? (and eventualy the .config you use for generate the "standard" distributed kernel image). Also, if I need to apply some patchs, just let me know. Thanks in advance. Olivier -- Olivier Bornet | français : http://puck.ch/f Swiss Ice Hockey Results | english : http://puck.ch/e http://puck.ch/ | deutsch : http://puck.ch/g [EMAIL PROTECTED] | italiano : http://puck.ch/i Get my PGP-key at http://puck.ch/pgp or at http://wwwkeys.pgp.net