> > It boots the SunBlade 100 to the "boot:" prompt, and I can type "help" > and get a help screen, but if I just press ENTER to start the install, > I get the message "Fast Data Access MMU Miss" followed by the "ok" > prompt. >
I had the same problem with the ISO on my SunBlade 100. In the end, what I did was setup my debian x86 desktop with rarpd,tftpd,and bootp and then I booted the SunBlade over my home network. That worked fine, and I was able to install Debian and I've been running it ever since, which is been about a month now. For more detailed instructions see: http://sunblade100.wells.org.uk/cache/59.html I also found the Debian install manual helpful, specifically section 4.5 - "Preparing Files for TFTP Net Booting" http://www.debian.org/releases/woody/i386/ch-install-methods.en.html -- ------------------------- Loren Bandiera, CISSP 420 Consulting Inc. [EMAIL PROTECTED] ------------------------- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]