Oct 31 19:16:24 gibraltar kernel: sunlance.c:v2.00 11/Sep/99 Miguel de Icaza (mi [EMAIL PROTECTED]) Oct 31 19:16:24 gibraltar kernel: eth0: LANCE 08:00:20:72:f3:7a Oct 31 19:16:24 gibraltar kernel: eth0: using auto-carrier-detection. Oct 31 19:16:24 gibraltar kernel: eth1: LANCE 08:00:20:72:f3:7a
Someone suggested that I do a modprobe bigmac, which failed. Might I have an hme card? Does anyone know anything about mixing hme and eth cards? I did an apt-cache search bigmac with no results. Where would I find those drivers? I will continue to Google. Thanks for the advice so far! Todd ----- Original Message ----- From: "Galen Seitz" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, October 31, 2002 7:13 AM Subject: Re: [PLUG] Adding new ethernet card to Sun20 running debian > > Were all three of your ethernet interfaces detected at boot time? > dmesg or /var/log/messages ought to show all three interfacess. > I would expect you to see the sparc equivalent of this three times. > > tulip.c:v0.91g-ppc 7/16/99 [EMAIL PROTECTED] > eth0: Digital DS21140 Tulip rev 34 at 0xa400, 00:40:05:A1:C2:09, IRQ 14. > eth0: EEPROM default media type Autosense. > eth0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block. > eth0: MII transceiver #0 config 0000 status 780d advertising 01e1. > eth0: Setting full-duplex based on MII#0 link partner capability of 41e1. > > Also, are you certain that your kernel/modules support the new card? > > Perhaps Paul H. can provide some additional insight. > > galen > > > > _______________________________________________ > PLUG mailing list > [EMAIL PROTECTED] > http://lists.pdxlinux.org/mailman/listinfo/plug