Below is the transcript of an unsuccessful install
of the latest Debian sparc distribution. I am an ultra linux newb. and even less
experienced with Sun hardware. Does anyone have any idea why this install stalls
at "sym0: SCSI BUS has been reset." Is this a problem people have had in the
past? I am interested to hear from people who have successfully installed debian
on Netra and A1000. Your help will be much appreciated, As i really want to use
debian on this machine. and cannot get anything but Solaris to install. Thankyou
so much for ur help :)
This is the Debian Install CD. Keep it once you
have installed your0000001 0000000000000015
0000000000000e37
system, as you can boot from it to repair the system on your hard disk if90 000000001045db80 00000000000c6ac8 0000000000000540 that ever becomes necessary. WARNING: You should completely back up all of your hard disks before rebooting... Resetting ... proceeding. The installation procedure can comple Keyboa Executing last command: boot Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permittedx
SunOS Release 5.8 by applicable law.528-03 64-bit [ ENTER - Boot install ] [ Type "rescue" - Boot into rescue
mode ]Microsystems, Inc. All rights
reserved.
You have `kernel/sparcv9/unix' string in your boot-file variable./[EMAIL PROTECTED],1/[EMAIL PROTECTED]/[EMAIL PROTECTED],0:a
fstype
ufs
This string doesn't contain valid arguments to SILO.thread=10408000: vfs_mountroot: cannot mount root Consider doing setenv boot-file. Anyway, SILO will continue as0000010407970 genunix:vfs_mountroot+70 (10432400, 0, 0, 104107 if there were no arguments in boo boot: /boot/sparc643d0 00000000000b22b Remapping the kernel...
done.
No alarm was installed for f005649c000000010407a20 genunix:main+94 (10 Booting Linux...07ec0, 10408030, PROMLIB: Sun IEEE Boot Prom 3.10.24 1999/08/16 17:37 cda4) Linux version 2.4.18 ([EMAIL PROTECTED]) (gcc version egcs-2.92.11 19980921 (gcc2 ss-980 %l4-7: 0 609 experimental)) #2 Thu Apr 11 14:37:17 EDT 2002000000000000540 ARCH: SUN4U Ethernet address: 08:00:20:c2:4b:7adump - no dump device configured On node 0 totalpages: 32164 rebooting zone(0): 89933 pages.ing ... zone(1): 0 pages.aSPARC-IIi 440MHz
zone(2): 0 pages. Executing last command: boot Memory: 246032k available (1944k kernel code, 512k data, 168k init) [fffff800000x SunOS Release 5.8 Versi 00000,000000002be9a000]bit Dentry-cache hash table entries: 32768 (order: 6, 524288 bytes)ems, Inc. All rights reserved. Inode-cache hash table entries: 16384 (order: 5, 262144 bytes)/[EMAIL PROTECTED],1/[EMAIL PROTECTED]/[EMAIL PROTECTED],0:a fstype ufs Mount-cache hash table entries: 4096 (order: 3, 65536 bytes)d=10408000: vfs_mountroot: cannot mount root Buffer-cache hash table entries: 8192 (order: 3, 65536 bytes)0 genunix:vfs_mountroot+70 (10432400, 0, 0, 1041076 %l0-3: 000000000000000 SABRE: DVMA at c0000000 [20000000] 0000000000000e37 PCI0(PBMA): Bus running at 33MHz %l4 PCI0(PBMB): Bus running at 33MHzdb80 00000000000c6ac8 0000000000 ebus0: [auxio] [power] [SUNW,pll] [su] [su] [ecpp] [fdthree] [eeprom] [flashprom skipping system dump - no dump device
configured
] [watchdog] [display7seg] [beeper] [flashprom] [flashprom] [i2c -> (adc) (gpio) t1 (UltraSPARC-IIi 440MHz), No Keyboa power: Control reg at 000001fff1724000 ... powerd running.OS Release 5.8 Version Generic_108528-03 64-bit Linux NET4.0 for Linux 2.4 Copyright 198 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket1f,0/[EMAIL PROTECTED],1/[EMAIL PROTECTED]/[EMAIL PROTECTED],0:a Starting kswapd Journalled Block Device driver loaded panic[cpu0]/thread=1040800
pty: 256 Unix98 ptys configuredoot rtc_init: no PC rtc found 0000000010407970
block: 128 slots per queue, batch=320, 0, 1041076 CMD646: chipset revision 0x03, MultiWord DMA Force Limited %l4-7: 0000000 CMD646: 100% native mode on irq 4,7c0c6ac8 0000000000000540 ide0: BM-DMA at 0x1fe02001020-0x1fe02001027, BIOS settings: hda:pio, hdb:piomp - no dump device configured r ide1: BM-DMA at 0x1fe02001028-0x1fe0200102f, BIOS
settings: hdc:pient: power
off
lom>help ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx help poweron poweroff reset show versio ide1 at 0x1fe02001010-0x1fe02001017,0x1fe0200101a on irq 4,7c0e supported: alarmon
hdc: lost interrupt sym.3.15.1: setting PCI_COMMAND_INVALIDATE. sym.1.2.0: setting PCI_COMMAND_PARITY... sym.1.2.0: setting PCI_COMMAND_INVALIDATE. sym0: <875> rev 0x14 on pci bus 3 device 15 function 0 irq 4,7c0 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym0: SCSI BUS has been reset. sym1: <875> rev 0x14 on pci bus 3 device 15 function 1 irq 4,7c1 sym1: No NVRAM, ID 7, Fast-20, SE, parity checking sym1: SCSI BUS has been reset. sym2: <875> rev 0x3 on pci bus 1 device 2 function 0 irq 4,7e0 sym2: No NVRAM, ID 7, Fast-20, SE, parity checking sym2: SCSI BUS has been reset. scsi0 : sym-2.1.17a scsi1 : sym-2.1.17a scsi2 : sym-2.1.17a sym0:0:0: ABORT operation started. sym0:0:0: ABORT operation timed-out. sym0:0:0: DEVICE RESET operation started. sym0:0:0: DEVICE RESET operation timed-out. sym0:0:0: BUS RESET operation started. sym0:0:0: BUS RESET operation timed-out. sym0:0:0: HOST RESET operation started. sym0: SCSI BUS has been reset. ***(installation stalls here)***
|
- Re: Installing Debian on Netra t1 and A1000 Morgan Martin-Skerm
- Re: Installing Debian on Netra t1 and A1000 Ben Collins
- Re: Installing Debian on Netra t1 and A1000 Morgan Martin-Skerm
- Re: Installing Debian on Netra t1 and A10... Ben Collins
- Re: Installing Debian on Netra t1 and... Morgan Martin-Skerm
- Re: Installing Debian on Netra t... Nate Campi
- Re: Installing Debian on Net... Morgan Martin-Skerm
- Re: Installing Debian on... Nate Campi
- Re: Installing Debian on... Morgan Martin-Skerm
- Re: Installing Debian on... Morgan Martin-Skerm
- Re: Installing Debian on Net... Morgan Martin-Skerm