On Fri, May 02, 2003 at 04:13:56PM -0400, Ben Collins wrote: > Boot back to the install and switch to a the shell console (ALT+F2) and > use "dmesg | more" to see if you can find some info about your IDE. I > have an Ultra5 here working perfectly with a non-stock IDE drive, so I > know it works.
Here's the boottime output when initializing the IDE busses:
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
CMD646: IDE controller on PCI bus 01 dev 18
CMD646: chipset revision 3
CMD646: chipset revision 0x03, MultiWord DMA Force Limited
CMD646: 100% native mode on irq 4,7e0
ide0: BM-DMA at 0x1fe02c00020-0x1fe02c00027, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1fe02c00028-0x1fe02c0002f, BIOS settings: hdc:pio, hdd:pio
hda: Conner Peripherals 1275MB - CFS1276A, ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hdc: CRD-8322B, ATAPI CD/DVD-ROM drive
ide0 at 0x1fe02c00000-0x1fe02c00007,0x1fe02c0000a on irq 4,7e0
ide1 at 0x1fe02c00010-0x1fe02c00017,0x1fe02c0001a on irq 4,7e0 (shared with ide)
hda: 2502308 sectors (1281 MB), CHS=2482/16/63, DMA
hdc: ATAPI 32X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 hda3
The partition table looks like:
Disk /dev/hda (Sun disk label): 16 heads, 63 sectors, 2480 cylinders
Units = cylinders of 1008 * 512 bytes
Device Flag Start End Blocks Id System
/dev/hda1 0 2379 1199016 83 Linux native
/dev/hda2 u 2379 2480 50904 82 Linux swap
/dev/hda3 0 2480 1249920 5 Whole disk
noah
--
_______________________________________________________
| Web: http://web.morgul.net/~frodo/
| PGP Public Key: http://web.morgul.net/~frodo/mail.html
pgp5fZaEbU0jD.pgp
Description: PGP signature
