В сообщении от 2 Апрель 2004 18:39 Ben Collins написал(a): > > Remapping kernel > > Booting Linux > > ============= > > and then it hanged. > > > > I have googled a lot and found many similar problems but no one solution. > > The most optimistic case was when someone got rid of it by simply > > recompiling the kernel "with several parameters changed" - so it will > > occassionally became "aligned" and booted up. I have not tryed it myself > > yet since I never did a cross-compile so it will take a lot of time and I > > will probably do it only next week. > > Add -p to the end of your boot net command line. Ok. Well. Thank you for your help - this key is really helped me to move forward but - nope - this is not enough. Now I have stuck with another problem - it can't find console so I did not see anything except of initial kernel messages.
I tryed three images this time: woody tftp image (still same effect - junk spreading all over the screen with "memory address not aligned error finally"), sarge d-i tftp image and tftp image from http://www.phunnypharm.org/. The last two images worked slightly differently: phunnypharm image prints out "Warning: can't find initial console" and then hangs. d-i beta 3 waits a moment and then panics after two "unknown sparc instructions" and "attempt to kill init". I can not connect through serial cable since this box have no RS-232 port and I have no first woody CD image (some additional googling points that it may be working). So - can you give me your invaluable tip once more? :-) -- Respectfully Alexey Nezhdanov