> BTW, Jeremy, did you do your recompiles on a 2.4 kernel or a 2.6 kernel? > I've > been trying to avoid 2.6 kernels for several reasons, but if it is NECESSARY > for this to work, I might reconsider...
It's not neccessary... If you don't use SMP, 2.6 is good for you. Some SCSI systems have problems >=2.6.7 (Blade 1K, don't know about others... I'm getting some u2s pretty soon, so hopefully I can find the cause). If you use IDE, you're fine. ALSA works for sound if you use the latest cvs or 1.0.7 with the ioctl32 fixes (search sparclinux gentoo-sparc or debian-sparc archives). > =========================================================== > Exhibit #1: 'cat /proc/bus/usb/devices' > =========================================================== > T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 1 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB OHCI Root Hub > S: SerialNumber=280a000 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB OHCI Root Hub > S: SerialNumber=2808000 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 3 > B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 2.04 > S: Manufacturer=Linux 2.4.27-10.1-dej-usb ehci_hcd > S: Product=PCI device 1033:00e0 > S: SerialNumber=02:03.2 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms > T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=059f ProdID=0202 Rev=11.06 > S: Manufacturer=LaCie > S: Product=LaCie StudioDrive USB2 > S: SerialNumber=11100E00053A4460 > C:* #Ifs= 1 Cfg#= 2 Atr=c0 MxPwr= 98mA > I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage > E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=125us > E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=32ms It's not detecting the keyboard... was it attached when you did this ^^^? -- Jeremy Huddleston <[EMAIL PROTECTED]>
signature.asc
Description: This is a digitally signed message part