Hi All, I saw the following: -
>Reportedly, current 2.6 kernels do not work *at all* on sun4m. I mailed this list with an update ref: the SPARC 4 sun4m and the 2.6.12-1-sparc32 kernel which Jurij requested people try out. Works fine on my box, after 1 or 2 issues which were solved quite quickly with help from Jurij and Google :-) Its running sarge and I am just doing an update/upgrade on the system, everything seems to be going ok though. Just thought I would drop a mail. Cheers, Steve -----Original Message----- From: Steve Langasek [mailto:[EMAIL PROTECTED] Sent: 26 July 2005 03:15 To: debian-boot@lists.debian.org; debian-sparc@lists.debian.org Subject: Re: Sarge may be last Debian release for 32 bit sparc systems On Mon, Jul 25, 2005 at 02:06:46PM -0700, Blars Blarson wrote: > In my opinion, we should drop support of all 32-bit sparc systems from > Etch due to lack of people willing to spend the time to support them. > This doesn't mean that we should delibaratly break things for them, > but that the interest in continuing to support them is below what is > needed to keep them as a viable part of Debian. > Support of sun4c and sun4d was effectivly dropped from Sarge. The > only reports trying d-i on this hardware that I remember seeing were > failures, and noone bother to try to fix it. Upgrades from Woody may > work, but were not well tested either. Were there actually install reports on sun4c and sun4d? I don't remember seeing any. Anyway, AIUI BenC killed these off years ago by changes to how gilbc was compiled. > Sun4m is the last supported 32-bit sparc architecture. Reportedly, > the 2.6 kernel does not work in multi-processor mode on them, and > dropping support of 2.4 from Etch is being discussed. Reportedly, current 2.6 kernels do not work *at all* on sun4m. This according to Jurij Smakov, who appears to currently be the sparc kernel maintainer in Debian. > Note that lack of hardware is not the problem, if anyone wants some > sun4m systems (located in Los Angeles) let me know before they wind up > in the recycle pile. I have one here; works fine under sarge with a 2.4 kernel. I have no intention of spending large amounts of my own time to keep 2.6 viable on this architecture, though, when as it stands the box I have is only powered up for use as a porting machine and it can't even be used to build Debian kernels because depmod bombs out. -- Steve Langasek postmodern programmer -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]