Stereo Support
Both Creator and Creator3D Graphics systems are stereo ready enabling users
to view stereo images (Creator) or dynamic stereo 3D geometry (Creator3D) by
adding the appropriate stereo viewing equipment.
A sync port is provided on the back of the Creator Graphics module which
interfaces to stereo viewing equipment. First generation systems feature a
mini-stereo connector to carry the sync signal while second generation systems
utilize an 8-pin mini-DIN connector.
A Stereo-capable monitor is shipped with each Creator Graphics system. A
compatible emitter and stereo glasses can be obtained from Stereographics
Corporation (Part# ESUN: Emitter and Cable, and Part# CE2: Stereo Glasses)
Regards,
Steve Garrett
On 9/9/05, Hartwig Atrops <[EMAIL PROTECTED]> wrote:
Hello all.
I yust received a Sun Ultra 60 wit a X3670A (501-5690) Creator 3D. The
Creator 3D has a 13W3 connector and a mini-Din (?) connector. What is that
mini-Din good for? Lots of useless Google hits ...
Thanks,
Hartwig
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
