Hi! I am struggling with configuring X11 on a ultra enterprise II.
prtconf -F says: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],0 the monitor is model GDM-17E10 I am trying it with the suncg6 X driver. With a stock debian kernel-image-2.6.8-2-sparc64 , X does start, but there is a blank screen, and I cannot ctrl-alt-f1 or ctrl-alt-backspace. Using the serial console, I can run xclock on it, and xlsclient confirms that xclock does run. I can also chvt1 and chvt 7. With a 2.6.13.1 kernel, I cannot even get X to find the device: (II) SUNCG6: driver for CGsix (GX and Turbo GX) (EE) No devices detected. Maybe the following additional information tells you something (note that FB_SBUS option is not present in the 2.6.13.1 config, and as far as I could figure out from the suncg6 source, it depends on frame buffer support.): [EMAIL PROTECTED]:/boot# grep SBUS config-2.6.* config-2.6.13.1:CONFIG_SBUS=y config-2.6.13.1:CONFIG_SBUSCHAR=y config-2.6.13.1:# CONFIG_MYRI_SBUS is not set config-2.6.8-2-sparc64:CONFIG_SBUS=y config-2.6.8-2-sparc64:CONFIG_SBUSCHAR=y config-2.6.8-2-sparc64:CONFIG_FB_SBUS=y config-2.6.8-2-sparc64:CONFIG_MYRI_SBUS=m Using stock debian kernel-image-2.4.27-2-sparc64, X works just fine, when I change the mouse definition to the one which is commented out in the config below. Please tell me what is going on, and how to use X and latest kernels. Thank you in advance. Here is my XF86Config-4, looking at commented out things you can figure what I was trying to change. section "ServerLayout" Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" Option "Xinerama" "yes" Option "Pixmap" "24" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc/" # FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" # FontPath "/usr/X11R6/lib/X11/fonts/Type1/" # FontPath "/usr/X11R6/lib/X11/fonts/CID/" # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" EndSection Section "Module" Load "dbe" Load "dri" Load "extmod" Load "glx" Load "pex5" Load "record" Load "xie" Load "type1" Load "freetype" Load "bitmap" Load "speedo" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "XkbRules" "sun" Option "XkbModel" "type5" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "CorePointer" Option "Device" "/dev/psaux" Option "Protocol" "PS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection #Section "InputDevice" # Identifier "Mouse0" # Driver "mouse" # Option "Protocol" "auto" # Option "Protocol" "mousesystems" # Option "Device" "/dev/sunmouse" #EndSection Section "Monitor" Identifier "Monitor0" VendorName "Sun" ModelName "GDM-17E10" # HorizSync 30-82 # VertRefresh 50-150 HorizSync 30-50 VertRefresh 50-70 # Option "DPMS" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "SWcursor" # [<bool>] #Option "HWcursor" # [<bool>] #Option "NoAccel" # [<bool>] Identifier "Card0" Driver "suncg6" # BusID "SBUS:/[EMAIL PROTECTED],0/[EMAIL PROTECTED],0" # BusID "SBUS:/[EMAIL PROTECTED],10000000/[EMAIL PROTECTED],10001000/[EMAIL PROTECTED],0" Option "HWcursor" "yes" Option "Accel" "yes EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 8 DefaultFbBpp 24 # SubSection "Display" # Depth 1 # Modes "1280x1024" # EndSubSection # SubSection "Display" # Depth 4 # Modes "1280x1024" # EndSubSection SubSection "Display" Depth 8 Modes "1024x768" EndSubSection # SubSection "Display" # Depth 8 # Modes "1280x1024" # EndSubSection # SubSection "Display" # Depth 15 # Modes "1280x1024" # EndSubSection # SubSection "Display" # Depth 16 # Modes "1280x1024" "1152x864" # EndSubSection # SubSection "Display" # Depth 24 # Modes "1280x1024" "1152x864" "1024x768" # EndSubSection EndSection -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]