Quoting Marc Coevoet <[EMAIL PROTECTED]>: > I'm using minicom on a linux machine , I try to set : >>> >>> Send 9600,8,N,1 data >>> > > But, where do I set "send" ??? (CTS etc ??°
Go to 'cOnfigure Minicom', select 'Serial port setup' then specify which serial port (on LOCAL machine) and speed etc you're using. > I mean, when I start it, I always see > > "Initialising modem" Go to 'cOnfigure Minicom', select 'Modem and dialing' then select 'A' ('Init string') and remove everything that's there. Then you won't get the "Initialising modem"... > I'm trying to connect to the sparc, that has no Sun console, > and I try to see if there's something on the serial out of > the sparc .. Are you using port A (first serial port) on the SPARC? if not, what port have you/is specified as 'output-device' and/or 'input-device'? -- North Korea Marxist Rule Psix supercomputer Waco, Texas Saddam Hussein cracking attack Peking munitions NSA Kennedy Serbian $400 million in gold bullion killed [See http://www.aclu.org/echelonwatch/index.html for more about this] [Or http://www.europarl.eu.int/tempcom/echelon/pdf/rapport_echelon_en.pdf] If neither of these works, try http://www.aclu.org and search for echelon. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]