On Fri, 06 Jan 2006 16:20:16 +0100, casper wrote: > Newbee question: . > > Is there som configuration I still have to do? > > Casper
Here is my quick'n'dirty HOWTO for the cs4231 audio (2.4.x kernel): 1) Make sure the soundcore module isn't loaded! Otherwise you will get this error: /lib/modules/2.4.27/kernel/drivers/sbus/audio/audio.o: init_module: Input/output error Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.27/kernel/drivers/sbus/audio/audio.o: insmod /lib/modules/2.4.27/kernel/drivers/sbus/audio/audio.o failed /lib/modules/2.4.27/kernel/drivers/sbus/audio/audio.o: insmod cs4231 failed 2) If soundcore is loaded /sbin/rmmod soundcore 3) After that: /sbin/modprobe cs4231 4) To automatically load the cs4231 module, modify /etc/modules. In case you are using the 2.6.x kernel, follow the instructions given by Frans Pop. The corresponding module is snd-sun-cs4231 Best regards, Attila -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]