Andrew M.A. Cater wrote:
Hello all,
A long and tortuous tale. A Sun Blade 100 which had a Debian Sarge
installation on failed with initially lots of network errors
occurring in the logs. An attempted upgrade in place to Etch failed for
various reasons (mostly my user incompetence :( then the saga below
followed.) [snipped]
Can anyone share the magic needed to get SILO to boot on one of these
machines. Once we can boot it, we can amend silo.conf and carry on from
there. A sarge bare basic install from CD ROM is also feasible if
necessary.
Mine says:
--------------------------------------------------------------
root=/dev/hda2
partition=1
default=Linux
read-only
timeout=100
### Note that for 2.6.18, the CD Rom needs ide=nodma or the boot process
### hangs at any one of several points where the CD is accessed.
### You can use hdparm to turn DMA back on for the HDD once the system
is up.
image=/vmlinuz
label=Linux
initrd=/initrd.img
append="video=atyfb:off ide=nodma" ### CDROM requires ide=nodma
image=/vmlinuz.old
label=LinuxOLD
initrd=/initrd.img.old
----------------------------------------------------------
This was a clean etch install only a few days ago. The ide=nodma
business may be your problem
Hugh
--
============S=u=p=p=o=r=t===D=e=b=i=a=n===http://www.debian.org =======
Dr. Hugh C. Pumphrey | Tel. 0131-650-6026,Fax:0131-662-0478
School of GeoSciences | Replace 0131 with +44-131 if outside UK
The University of Edinburgh | Email: [EMAIL PROTECTED]
EDINBURGH EH9 3JN, Scotland | web: www.geos.ed.ac.uk/contacts/homes/hcp
=====I==o=f=t=e=n==i=g=n=o=r=e==M=S==W=o=r=d==a=t=t=a=c=h=m=e=n=t=s====
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]