I did a fresh netinstall of Etch on my Ultra 60 with Elite3D graphics and 21" Sun CRT monitor. All worked well when I did this on a PC using the same Sun monitor. However, on the Ultra 60 the X server fails to start.
The installation program seems to have detected the graphics card correctly. Below is an excerpt from my /etc/X11/xorg.conf. The "Monitor" section is identical on the PC, except on the PC the HorizSync and VertRefresh lines are absent. Can anyone advise me on how to get the X server working? Section "Device" Identifier "Sun Elite3D framebuffer or similar (SUNW,XXX- XXXX)" Driver "sunffb" Option "UseFBDev" "true" EndSection Section "Monitor" Identifier "Generic Monitor" Option "DPMS" HorizSync 28-51 VertRefresh 43-60 EndSection -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]