hi, i am new to sparc hardware, just found this isse after setting up lenny using netboot install. default kernal options on the stock kernel fails (see attached txt - withoutdma.txt), if i add ide=nodma boots correctly. is this a known issue? (as i found on some ubuntu forums) let me know if more info is required. below is lspci output
00:03.0 Non-VGA unclassified device: ALi Corporation M7101 Power Management Cont roller [PMU] 00:05.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03) 00:07.0 ISA bridge: ALi Corporation M1533/M1535/M1543 PCI to ISA Bridge [Aladdin IV/V/V+] 00:08.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controlle r Audio Device (rev 01) 00:0c.0 Bridge: Sun Microsystems Computer Corp. RIO EBUS (rev 01) 00:0c.1 Ethernet controller: Sun Microsystems Computer Corp. RIO 10/100 Ethernet [eri] (rev 01) 00:0c.2 FireWire (IEEE 1394): Sun Microsystems Computer Corp. RIO 1394 (rev 01) 00:0c.3 USB Controller: Sun Microsystems Computer Corp. RIO USB (rev 01) 00:0d.0 IDE interface: ALi Corporation M5229 IDE (rev c3) 00:13.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 65) 01:02.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14) 01:02.1 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14) cheers! nataraj
Sun Blade 100 (UltraSPARC-IIe), No Keyboard Copyright 2005 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.17.1, 1792 MB memory installed, Serial #50636767. Ethernet address 0:3:ba:4:a7:df, Host ID: 8304a7df. Boot device: disk File and args: SILO Version 1.4.13 boot: Allocated 8 Megs of memory at 0x40000000 for kernel Uncompressing image... Loaded kernel version 2.6.26 Loading initial ramdisk (6314719 bytes at 0x6F800000 phys, 0x40C00000 virt)... - [ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.17.1 2005/04/11 14:31' [ 0.000000] PROMLIB: Root node compatible: [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-2-sparc64 (Debian 2.6.26-17lenny2) (da...@de bian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 Sat Aug 15 22:45:07 UTC 2009 [ 0.000000] console [earlyprom0] enabled [ 0.000000] ARCH: SUN4U [ 0.000000] Ethernet address: 00:03:ba:04:a7:df [ 0.000000] Kernel: Using 1 locked TLB entries for main kernel image. [ 0.000000] Remapping the kernel... done. [ 0.000000] OF stdout device is: /p...@1f,0/i...@7/ser...@0,3f8 [ 0.000000] PROM: Built device tree with 60468 bytes of memory. [ 0.000000] Top of RAM: 0x6ff0c000, Total RAM: 0x6fef6000 [ 0.000000] Memory hole size: 0MB [ 0.000000] [0000000200000000-fffff80000400000] page_structs=131072 node=0 en try=0/0 [ 0.000000] [0000000200000000-fffff80000800000] page_structs=131072 node=0 en try=1/0 [ 0.000000] [0000000200700000-fffff80000c00000] page_structs=131072 node=0 en try=2/0 [ 0.000000] [0000000200700000-fffff80001000000] page_structs=131072 node=0 en try=3/0 [ 0.000000] Zone PFN ranges: [ 0.000000] Normal 0 -> 229254 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 227327 [ 0.000000] 0: 227328 -> 229240 [ 0.000000] 0: 229250 -> 229254 [ 0.000000] Booting Linux... [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 227675 [ 0.000000] Kernel command line: root=/dev/hda2 ro [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] clocksource: mult[b40001] shift[16] [ 0.000000] clockevent: mult[16c16bf] shift[32] [ 45.811263] Console: colour dummy device 80x25 [ 45.869648] console handover: boot [earlyprom0] -> real [tty0] [ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.17.1 2005/04/11 14:31' [ 0.000000] PROMLIB: Root node compatible: [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-2-sparc64 (Debian 2.6.26-17lenny2) (da...@de bian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 Sat Aug 15 22:45:07 UTC 2009 [ 0.000000] console [earlyprom0] enabled [ 0.000000] ARCH: SUN4U [ 0.000000] Ethernet address: 00:03:ba:04:a7:df [ 0.000000] Kernel: Using 1 locked TLB entries for main kernel image. [ 0.000000] Remapping the kernel... done. [ 0.000000] OF stdout device is: /p...@1f,0/i...@7/ser...@0,3f8 [ 0.000000] PROM: Built device tree with 60468 bytes of memory. [ 0.000000] Top of RAM: 0x6ff0c000, Total RAM: 0x6fef6000 [ 0.000000] Memory hole size: 0MB [ 0.000000] [0000000200000000-fffff80000400000] page_structs=131072 node=0 en try=0/0 [ 0.000000] [0000000200000000-fffff80000800000] page_structs=131072 node=0 en try=1/0 [ 0.000000] [0000000200700000-fffff80000c00000] page_structs=131072 node=0 en try=2/0 [ 0.000000] [0000000200700000-fffff80001000000] page_structs=131072 node=0 en try=3/0 [ 0.000000] Zone PFN ranges: [ 0.000000] Normal 0 -> 229254 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 227327 [ 0.000000] 0: 227328 -> 229240 [ 0.000000] 0: 229250 -> 229254 [ 0.000000] Booting Linux... [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 227675 [ 0.000000] Kernel command line: root=/dev/hda2 ro [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] clocksource: mult[b40001] shift[16] [ 0.000000] clockevent: mult[16c16bf] shift[32] [ 45.811263] Console: colour dummy device 80x25 [ 45.869648] console handover: boot [earlyprom0] -> real [tty0] [ 45.959098] Dentry cache hash table entries: 262144 (order: 8, 2097152 bytes) [ 45.978508] Inode-cache hash table entries: 131072 (order: 7, 1048576 bytes) [ 46.109393] Memory: 1803200k available (2592k kernel code, 944k data, 176k in it) [fffff80000000000,000000006ff0c000] [ 46.188125] Calibrating delay using timer specific routine.. 11.10 BogoMIPS ( lpj=22210) [ 46.188401] Security Framework initialized [ 46.188461] SELinux: Disabled at boot. [ 46.188499] Capability LSM initialized [ 46.188576] Mount-cache hash table entries: 512 [ 46.189602] Initializing cgroup subsys ns [ 46.189648] Initializing cgroup subsys cpuacct [ 46.189672] Initializing cgroup subsys devices [ 46.191213] net_namespace: 1208 bytes [ 46.192166] NET: Registered protocol family 16 [ 46.210467] PCI: Probing for controllers. [ 46.213815] /p...@1f,0: SABRE PCI Bus Module [ 46.213892] /p...@1f,0: PCI IO[1fe02000000] MEM[1ff00000000] [ 46.213993] PCI: Scanning PBM /p...@1f,0 [ 46.214919] pci 0000:00:03.0: quirk: region 0800-083f claimed by ali7101 ACPI [ 46.214961] pci 0000:00:03.0: quirk: region 0600-061f claimed by ali7101 SMB [ 46.219447] ebus0: [flashprom] [eeprom] [idprom] [ 46.220712] power: Control reg at 1fe02000800 [ 46.228244] usbcore: registered new interface driver usbfs [ 46.228779] usbcore: registered new interface driver hub [ 46.229176] usbcore: registered new device driver usb [ 46.240996] /p...@1f,0/e...@c/eep...@1,0: Clock regs at 000001fff1000000 [ 46.243961] NET: Registered protocol family 2 [ 46.276597] IP route cache hash table entries: 65536 (order: 6, 524288 bytes) [ 46.280937] TCP established hash table entries: 262144 (order: 9, 4194304 byt es) [ 46.306876] TCP bind hash table entries: 65536 (order: 6, 524288 bytes) [ 46.310215] TCP: Hash tables configured (established 262144 bind 65536) [ 46.310307] TCP reno registered [ 46.320770] NET: Registered protocol family 1 [ 46.321380] checking if image is initramfs... it is [ 48.727202] Freeing initrd memory: 6166k freed [ 48.728260] Mini RTC Driver [ 48.730195] audit: initializing netlink socket (disabled) [ 48.730308] type=2000 audit(1250935417.976:1): initialized [ 48.731038] Total HugeTLB memory allocated, 0 [ 48.731605] VFS: Disk quotas dquot_6.5.1 [ 48.731818] Dquot-cache hash table entries: 1024 (order 0, 8192 bytes) [ 48.732133] msgmni has been set to 3535 [ 48.732986] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 53) [ 48.733069] io scheduler noop registered [ 48.733109] io scheduler anticipatory registered [ 48.733150] io scheduler deadline registered [ 48.733240] io scheduler cfq registered (default) [ 48.733312] pci 0000:00:07.0: Activating ISA DMA hang workarounds [ 48.734260] atyfb: 3D RAGE XL (Mach64 GR, PCI-33) [0x4752 rev 0x65] [ 48.735173] atyfb: 8M SDRAM (1:1), 29.498928 MHz XTAL, 230 MHz PLL, 83 Mhz MC LK, 63 MHz XCLK [ 48.809283] Console: switching to colour frame buffer device 144x56 [ 48.836301] atyfb: fb0: ATY Mach64 frame buffer device on PCI [ 48.854795] [drm] Initialized drm 1.1.0 20060810 [ 48.855777] f007d64c: ttyS0 at MMIO 0x1fe020003f8 (irq = 9) is a 16550A [ 48.856094] Console: ttyS0 (SU) [ 48.856252] console [ttyS0] enabled [ 55.497606] f007f1a4: ttyS1 at MMIO 0x1fe020002e8 (irq = 9) is a 16550A [ 55.603738] brd: module loaded [ 55.657444] loop: module loaded [ 55.708181] Uniform Multi-Platform E-IDE driver [ 55.776743] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 55.893760] mice: PS/2 mouse device common for all mice [ 55.974217] usbcore: registered new interface driver usbhid [ 56.057044] usbhid: v2.6:USB HID core driver [ 56.125139] TCP cubic registered [ 56.177523] NET: Registered protocol family 17 [ 56.246473] registered taskstats version 1 [ 56.310488] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Loading, please wait... Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... [ 58.449503] sungem.c:v0.98 8/24/03 David S. Miller (da...@redhat.com) [ 58.546921] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:ba:04:a7:df [ 58.648693] eth0: Found Generic MII PHY [ 58.776336] ohci_hcd 0000:00:0c.3: OHCI Host Controller [ 58.855843] ohci_hcd 0000:00:0c.3: new USB bus registered, assigned bus numbe r 1 [ 58.963149] ohci_hcd 0000:00:0c.3: irq 13, io mem 0x1ff02000000 [ 59.213169] SCSI subsystem initialized [ 59.317758] usb usb1: configuration #1 chosen from 1 choice [ 59.401579] hub 1-0:1.0: USB hub found [ 59.461283] hub 1-0:1.0: 4 ports detected [ 59.628082] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 59.727477] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 59.832818] usb usb1: Product: OHCI Host Controller [ 59.906727] usb usb1: Manufacturer: Linux 2.6.26-2-sparc64 ohci_hcd [ 59.999178] usb usb1: SerialNumber: 0000:00:0c.3 [ 60.121024] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[12] MMIO=[1ff00420 000-1ff004207ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 60.307856] sym0: <875> rev 0x14 at pci 0000:01:02.0 irq 16 [ 60.391934] ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc3) at PCI slot 000 0:00:0d.0 [ 60.507252] ALI15X3: 100% native mode on irq 15 [ 60.577648] ide0: BM-DMA at 0x1fe02000a20-0x1fe02000a27 [ 60.661826] ide1: BM-DMA at 0x1fe02000a28-0x1fe02000a2f [ 60.845534] sym0: No NVRAM, ID 7, Fast-20, SE, parity checking [ 60.939320] sym0: SCSI BUS has been reset. [ 61.003721] scsi0 : sym-2.2.3 [ 61.053217] eth0: Link is up at 100 Mbps, full-duplex. [ 61.140564] sym1: <875> rev 0x14 at pci 0000:01:02.1 irq 17 [ 61.315912] sym1: No NVRAM, ID 7, Fast-20, SE, parity checking [ 61.409601] sym1: SCSI BUS has been reset. [ 61.473918] scsi1 : sym-2.2.3 [ 61.636625] hda: WDC WD400BB-22FJA0, ATA DISK drive [ 62.172506] hdb: Pioneer DVD-ROM ATAPIModel DVD-116 0109, ATAPI CD/DVD-ROM dr ive [ 62.336668] hda: UDMA/66 mode selected [ 62.396554] hdb: UDMA/66 mode selected [ 63.024555] ide0 at 0x1fe02000a00-0x1fe02000a07,0x1fe02000a1a on irq 15 [ 63.122430] ide1 at 0x1fe02000a10-0x1fe02000a17,0x1fe02000a0a on irq 15 [ 63.441333] hda: max request size: 128KiB [ 63.540733] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63 [ 63.645150] hda: cache flushes supported [ 63.707565] hda: hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8 [ 63.806606] hdb: ATAPI 40X DVD-ROM drive, 256kB Cache [ 63.883799] Uniform CD-ROM driver Revision: 3.20 done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. [ 64.587477] EXT3-fs: INFO: recovery required on readonly filesystem. [ 64.681774] EXT3-fs: write access will be enabled during recovery. [ 64.792758] kjournald starting. Commit interval 5 seconds [ 64.875516] EXT3-fs: recovery complete. [ 64.936990] EXT3-fs: mounted filesystem with ordered data mode. Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. [ 65.336480] Kernel panic - not syncing: Attempted to kill init! [ 65.424879] Press Stop-A (L1-A) to return to the boot prom
Sun Blade 100 (UltraSPARC-IIe), No Keyboard Copyright 2005 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.17.1, 1792 MB memory installed, Serial #50636767. Ethernet address 0:3:ba:4:a7:df, Host ID: 8304a7df. Boot device: disk File and args: SILO Version 1.4.13 boot: Linux ide=nodma Allocated 8 Megs of memory at 0x40000000 for kernel Uncompressing image... Loaded kernel version 2.6.26 Loading initial ramdisk (6314719 bytes at 0x6F800000 phys, 0x40C00000 virt)... - [ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.17.1 2005/04/11 14:31' [ 0.000000] PROMLIB: Root node compatible: [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-2-sparc64 (Debian 2.6.26-17lenny2) (da...@de bian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 Sat Aug 15 22:45:07 UTC 2009 [ 0.000000] console [earlyprom0] enabled [ 0.000000] ARCH: SUN4U [ 0.000000] Ethernet address: 00:03:ba:04:a7:df [ 0.000000] Kernel: Using 1 locked TLB entries for main kernel image. [ 0.000000] Remapping the kernel... done. [ 0.000000] OF stdout device is: /p...@1f,0/i...@7/ser...@0,3f8 [ 0.000000] PROM: Built device tree with 60468 bytes of memory. [ 0.000000] Top of RAM: 0x6ff0c000, Total RAM: 0x6fef6000 [ 0.000000] Memory hole size: 0MB [ 0.000000] [0000000200000000-fffff80000400000] page_structs=131072 node=0 en try=0/0 [ 0.000000] [0000000200000000-fffff80000800000] page_structs=131072 node=0 en try=1/0 [ 0.000000] [0000000200700000-fffff80000c00000] page_structs=131072 node=0 en try=2/0 [ 0.000000] [0000000200700000-fffff80001000000] page_structs=131072 node=0 en try=3/0 [ 0.000000] Zone PFN ranges: [ 0.000000] Normal 0 -> 229254 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 227327 [ 0.000000] 0: 227328 -> 229240 [ 0.000000] 0: 229250 -> 229254 [ 0.000000] Booting Linux... [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 227675 [ 0.000000] Kernel command line: root=/dev/hda2 ro ide=nodma [ 0.000000] ide_setup: ide=nodma : Prevented DMA [ 0.000000] -- OBSOLETE OPTION, WILL BE REMOVED SOON! [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] clocksource: mult[b40001] shift[16] [ 0.000000] clockevent: mult[16c16bf] shift[32] [ 48.059800] Console: colour dummy device 80x25 [ 48.118186] console handover: boot [earlyprom0] -> real [tty0] [ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.17.1 2005/04/11 14:31' [ 0.000000] PROMLIB: Root node compatible: [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-2-sparc64 (Debian 2.6.26-17lenny2) (da...@de bian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 Sat Aug 15 22:45:07 UTC 2009 [ 0.000000] console [earlyprom0] enabled [ 0.000000] ARCH: SUN4U [ 0.000000] Ethernet address: 00:03:ba:04:a7:df [ 0.000000] Kernel: Using 1 locked TLB entries for main kernel image. [ 0.000000] Remapping the kernel... done. [ 0.000000] OF stdout device is: /p...@1f,0/i...@7/ser...@0,3f8 [ 0.000000] PROM: Built device tree with 60468 bytes of memory. [ 0.000000] Top of RAM: 0x6ff0c000, Total RAM: 0x6fef6000 [ 0.000000] Memory hole size: 0MB [ 0.000000] [0000000200000000-fffff80000400000] page_structs=131072 node=0 en try=0/0 [ 0.000000] [0000000200000000-fffff80000800000] page_structs=131072 node=0 en try=1/0 [ 0.000000] [0000000200700000-fffff80000c00000] page_structs=131072 node=0 en try=2/0 [ 0.000000] [0000000200700000-fffff80001000000] page_structs=131072 node=0 en try=3/0 [ 0.000000] Zone PFN ranges: [ 0.000000] Normal 0 -> 229254 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 227327 [ 0.000000] 0: 227328 -> 229240 [ 0.000000] 0: 229250 -> 229254 [ 0.000000] Booting Linux... [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 227675 [ 0.000000] Kernel command line: root=/dev/hda2 ro ide=nodma [ 0.000000] ide_setup: ide=nodma : Prevented DMA [ 0.000000] -- OBSOLETE OPTION, WILL BE REMOVED SOON! [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] clocksource: mult[b40001] shift[16] [ 0.000000] clockevent: mult[16c16bf] shift[32] [ 48.059800] Console: colour dummy device 80x25 [ 48.118186] console handover: boot [earlyprom0] -> real [tty0] [ 48.207619] Dentry cache hash table entries: 262144 (order: 8, 2097152 bytes) [ 48.227034] Inode-cache hash table entries: 131072 (order: 7, 1048576 bytes) [ 48.354655] Memory: 1803200k available (2592k kernel code, 944k data, 176k in it) [fffff80000000000,000000006ff0c000] [ 48.432663] Calibrating delay using timer specific routine.. 11.10 BogoMIPS ( lpj=22210) [ 48.432935] Security Framework initialized [ 48.432996] SELinux: Disabled at boot. [ 48.433034] Capability LSM initialized [ 48.433110] Mount-cache hash table entries: 512 [ 48.434140] Initializing cgroup subsys ns [ 48.434184] Initializing cgroup subsys cpuacct [ 48.434208] Initializing cgroup subsys devices [ 48.435744] net_namespace: 1208 bytes [ 48.436639] NET: Registered protocol family 16 [ 48.454970] PCI: Probing for controllers. [ 48.458319] /p...@1f,0: SABRE PCI Bus Module [ 48.458394] /p...@1f,0: PCI IO[1fe02000000] MEM[1ff00000000] [ 48.458495] PCI: Scanning PBM /p...@1f,0 [ 48.459423] pci 0000:00:03.0: quirk: region 0800-083f claimed by ali7101 ACPI [ 48.459461] pci 0000:00:03.0: quirk: region 0600-061f claimed by ali7101 SMB [ 48.463991] ebus0: [flashprom] [eeprom] [idprom] [ 48.465228] power: Control reg at 1fe02000800 [ 48.472713] usbcore: registered new interface driver usbfs [ 48.473250] usbcore: registered new interface driver hub [ 48.473651] usbcore: registered new device driver usb [ 48.485525] /p...@1f,0/e...@c/eep...@1,0: Clock regs at 000001fff1000000 [ 48.488513] NET: Registered protocol family 2 [ 48.521126] IP route cache hash table entries: 65536 (order: 6, 524288 bytes) [ 48.525493] TCP established hash table entries: 262144 (order: 9, 4194304 byt es) [ 48.551434] TCP bind hash table entries: 65536 (order: 6, 524288 bytes) [ 48.554785] TCP: Hash tables configured (established 262144 bind 65536) [ 48.554873] TCP reno registered [ 48.565296] NET: Registered protocol family 1 [ 48.565910] checking if image is initramfs... it is [ 50.969258] Freeing initrd memory: 6166k freed [ 50.970331] Mini RTC Driver [ 50.972222] audit: initializing netlink socket (disabled) [ 50.972336] type=2000 audit(1250935656.968:1): initialized [ 50.973130] Total HugeTLB memory allocated, 0 [ 50.973701] VFS: Disk quotas dquot_6.5.1 [ 50.973918] Dquot-cache hash table entries: 1024 (order 0, 8192 bytes) [ 50.974239] msgmni has been set to 3535 [ 50.975033] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 53) [ 50.975121] io scheduler noop registered [ 50.975162] io scheduler anticipatory registered [ 50.975204] io scheduler deadline registered [ 50.975291] io scheduler cfq registered (default) [ 50.975362] pci 0000:00:07.0: Activating ISA DMA hang workarounds [ 50.976305] atyfb: 3D RAGE XL (Mach64 GR, PCI-33) [0x4752 rev 0x65] [ 50.977279] atyfb: 8M SDRAM (1:1), 29.498928 MHz XTAL, 230 MHz PLL, 83 Mhz MC LK, 63 MHz XCLK [ 51.051010] Console: switching to colour frame buffer device 144x56 [ 51.077910] atyfb: fb0: ATY Mach64 frame buffer device on PCI [ 51.096273] [drm] Initialized drm 1.1.0 20060810 [ 51.097321] f007d64c: ttyS0 at MMIO 0x1fe020003f8 (irq = 9) is a 16550A [ 51.097625] Console: ttyS0 (SU) [ 51.097790] console [ttyS0] enabled [ 57.890206] f007f1a4: ttyS1 at MMIO 0x1fe020002e8 (irq = 9) is a 16550A [ 57.996437] brd: module loaded [ 58.050114] loop: module loaded [ 58.100665] Uniform Multi-Platform E-IDE driver [ 58.169209] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 58.286430] mice: PS/2 mouse device common for all mice [ 58.366466] usbcore: registered new interface driver usbhid [ 58.449770] usbhid: v2.6:USB HID core driver [ 58.517916] TCP cubic registered [ 58.570164] NET: Registered protocol family 17 [ 58.639346] registered taskstats version 1 [ 58.703351] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Loading, please wait... Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... [ 60.851560] sungem.c:v0.98 8/24/03 David S. Miller (da...@redhat.com) [ 60.948548] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:ba:04:a7:df [ 61.050068] eth0: Found Generic MII PHY [ 61.171004] ohci_hcd 0000:00:0c.3: OHCI Host Controller [ 61.250801] ohci_hcd 0000:00:0c.3: new USB bus registered, assigned bus numbe r 1 [ 61.358250] ohci_hcd 0000:00:0c.3: irq 13, io mem 0x1ff02000000 [ 61.609736] SCSI subsystem initialized [ 61.715923] usb usb1: configuration #1 chosen from 1 choice [ 61.800089] hub 1-0:1.0: USB hub found [ 61.859534] hub 1-0:1.0: 4 ports detected [ 62.025881] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 62.125515] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 62.230541] usb usb1: Product: OHCI Host Controller [ 62.304505] usb usb1: Manufacturer: Linux 2.6.26-2-sparc64 ohci_hcd [ 62.396951] usb usb1: SerialNumber: 0000:00:0c.3 [ 62.520056] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[12] MMIO=[1ff00420 000-1ff004207ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 62.706477] sym0: <875> rev 0x14 at pci 0000:01:02.0 irq 16 [ 62.790850] ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc3) at PCI slot 000 0:00:0d.0 [ 62.906132] ALI15X3: 100% native mode on irq 15 [ 62.976499] ide0: BM-DMA at 0x1fe02000a20-0x1fe02000a27 [ 63.060893] ide1: BM-DMA at 0x1fe02000a28-0x1fe02000a2f [ 63.244840] sym0: No NVRAM, ID 7, Fast-20, SE, parity checking [ 63.339019] sym0: SCSI BUS has been reset. [ 63.403713] scsi0 : sym-2.2.3 [ 63.453404] eth0: Link is up at 100 Mbps, full-duplex. [ 63.541213] sym1: <875> rev 0x14 at pci 0000:01:02.1 irq 17 [ 63.715753] sym1: No NVRAM, ID 7, Fast-20, SE, parity checking [ 63.809837] sym1: SCSI BUS has been reset. [ 63.874396] scsi1 : sym-2.2.3 [ 64.037154] hda: WDC WD400BB-22FJA0, ATA DISK drive [ 64.573032] hdb: Pioneer DVD-ROM ATAPIModel DVD-116 0109, ATAPI CD/DVD-ROM dr ive [ 65.305073] ide0 at 0x1fe02000a00-0x1fe02000a07,0x1fe02000a1a on irq 15 [ 65.403029] ide1 at 0x1fe02000a10-0x1fe02000a17,0x1fe02000a0a on irq 15 [ 65.719360] hda: max request size: 128KiB [ 65.821262] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63 [ 65.926243] hda: cache flushes supported [ 65.988676] hda: hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8 [ 66.092376] hdb: ATAPI 40X DVD-ROM drive, 256kB Cache [ 66.169815] Uniform CD-ROM driver Revision: 3.20 done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. [ 66.931540] kjournald starting. Commit interval 5 seconds [ 67.014388] EXT3-fs: mounted filesystem with ordered data mode. Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.86 booting Starting the hotplug events dispatcher: udevd[ 69.861925] udevd version 125 st arted . Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...done. Setting the system clock. Activating swap...[ 75.954320] Adding 3028232k swap on /dev/hda6. Priority:-1 extents:1 across:3028232k done. Checking root file system...fsck 1.41.3 (12-Oct-2008) /dev/hda2: clean[ 76.522443] EXT3 FS on hda2, , 2940/68544 filinternal journal es, 82548/273104 blocks done. Setting the system clock. Cleaning up ifupdown.... Loading kernel modules...done. Checking file systems...fsck 1.41.3 (12-Oct-2008) /dev/hda1 was not cleanly unmounted, check forced. /dev/hda1: 29/48192 files (3.4% non-contiguous), 15273/96390 blocks /dev/hda8: recovering journal /dev/hda8: clean, 15/1716960 files, 151816/6867786 blocks /dev/hda7: recovering journal /dev/hda7: Clearing orphaned inode 12 (uid=0, gid=0, mode=0100600, size=0) /dev/hda7: clean, 13/98784 files, 22761/393592 blocks /dev/hda4: recovering journal /dev/hda4: clean, 21358/305824 files, 150507/1220940 blocks /dev/hda5: recovering journal /dev/hda5: clean, 1878/183264 files, 92146/732964 blocks fsck died with exit status 1 done. Setting kernel variables (/etc/sysctl.conf)...done. Mounting local filesystems...[ 84.535150] kjournald starting. Commit interval 5 seconds [ 84.619562] EXT3 FS on hda8, internal journal [ 84.687340] EXT3-fs: mounted filesystem with ordered data mode. [ 84.812502] kjournald starting. Commit interval 5 seconds [ 84.896099] EXT3 FS on hda7, internal journal [ 84.963915] EXT3-fs: mounted filesystem with ordered data mode. [ 85.095888] kjournald starting. Commit interval 5 seconds [ 85.180037] EXT3 FS on hda4, internal journal [ 85.247802] EXT3-fs: mounted filesystem with ordered data mode. [ 85.372762] kjournald starting. Commit interval 5 seconds [ 85.456770] EXT3 FS on hda5, internal journal [ 85.524523] EXT3-fs: mounted filesystem with ordered data mode. done. Activating swapfile swap...done. Setting up networking.... Configuring network interfaces...done. Starting portmap daemon.... [ 87.351254] eth0: Link is up at 100 Mbps, full-duplex. [ 87.429262] eth0: Pause is disabled Starting NFS common utilities: statd. INIT: Entering runlevel: 2 Starting enhanced syslogd: rsyslogd. Starting MTA: exim4. Starting NFS common utilities: statd. [ 92.198724] RPC: Registered udp transport module. [ 92.270923] RPC: Registered tcp transport module. [ 92.621873] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). Exporting directories for NFS kernel daemon.... Starting NFS kernel daemon: nfsd[ 93.007457] NFSD: Using /var/lib/nfs/v4recove ry as the NFSv4 state recovery directory [ 93.135144] NFSD: starting 90-second grace period mountd. Starting internet superserver: inetd. Starting Samba daemons: nmbd smbd[ 95.808965] NET: Registered protocol family 10 [ 95.880706] lo: Disabled Privacy Extensions . Not starting S.M.A.R.T. daemon smartd, disabled via /etc/default/smartmontools ( warning). Starting the Winbind daemon: winbind. Starting Netatalk services (this will take a while): [ 97.788171] NET: Registe red protocol family 5 atalkd afpd papd. Starting deferred execution scheduler: atd. Starting periodic command scheduler: crond. Starting web server: apache2. Debian GNU/Linux 5.0 krishna ttyS0 krishna login: