Sorry if anything is out of place. Very hard to see through the r display. Any hope? lspci output:
0000:00:03.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703 Gigabit Ethernet 0001:00:04.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1010 66MHz Ultra3 SCSI Adapter (rev 01) 0001:00:04.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1010 66MHz Ultra3 SCSI Adapter (rev 01) 0002:00:02.0 Bridge: Intel Corporation 21555 Non transparent PCI-to-PCI Bridge (rev 03) 0002:00:04.0 PCI bridge: Texas Instruments PCI2250 PCI-to-PCI Bridge (rev 02) 0002:00:06.0 Non-VGA unclassified device: ALi Corporation M7101 Power Management Controller [PMU] 0002:00:07.0 ISA bridge: ALi Corporation M1533/M1535/M1543 PCI to ISA Bridge [Aladdin IV/V/V+] 0002:00:08.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 02) 0002:00:0a.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) 0002:00:0b.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) 0002:00:0d.0 IDE interface: ALi Corporation M5229 IDE (rev c4) 0002:01:08.0 USB Controller: NEC Corporation USB (rev 43) 0002:01:08.1 USB Controller: NEC Corporation USB (rev 43) 0002:01:08.2 USB Controller: NEC Corporation USB 2.0 (rev 04) 0002:01:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) 0003:00:02.0 Display controller: 3DLabs Sun XVR-500 Graphics Accelerator (rev 01) __________ ______________________________ From: Frans van Berckel [fberc...@xs4all.nl] Sent: Monday, March 15, 2010 11:18 AM To: Paul Cao Cc: debian-sparc@lists.debian.org Subject: Re: Debian Sparc 5.4 on Sun blade 2500 Can you get me "prtconf -pv" or "lspci" output with the card installed? Thanks, Frans van Berckel On Mon, 2010-03-15 at 09:29 -0400, Paul Cao wrote: > I checked my video card and its model is XVR-600. So I guess that's > the end of debian on this machine with GUI. Thanks all for helping > with this. > pc > On Mar 12, 2010, at 10:14 AM, Paul Cao wrote: > > > I installed Debian sparc 5.4 on a Sun blade 2500. Everything went > > well in the installation process. However, when the system loads > > Debian, the display is garbled. There are vertical strips on the > > screen and the whole display is fuzzy. > > > > I use a sun monitor through DVI connection. I have tried to use > > other monitors through DVI, no use. No signal from VGA. > > > > Any help is greatly appreciated. > > > > Thanks. > > > > -- > > To UNSUBSCRIBE, email to debian-sparc-requ...@lists.debian.org > > with a subject of "unsubscribe". Trouble? Contact > > listmas...@lists.debian.org > > Archive: > > http://lists.debian.org/67c7c7d8feead841b31b9f6867e915de0786bcb...@ex-mb1.ad.ashland.edu > > > > -- To UNSUBSCRIBE, email to debian-sparc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/67c7c7d8feead841b31b9f6867e915de0786bcb...@ex-mb1.ad.ashland.edu