Hi TCH Are you using a screen connected to the video port? Try instead a serial port. It might be 9600 no parity. HTH -- Rick
On April 6, 2017 12:56:57 PM EDT, transmail <transm...@freemail.hu> wrote: >Hi! > >I just got my Sun 6 USB keyboard, so finally i could try my Sun Blade >100. >However, i cannot enter OBP. The machine seems to be alive: after the >power button is pressed, the LED goes green, a short beep emitted, the >LED flashes five times and then remains on and the monitor switches on >(but remains black). The CD drive ejects on demand and the HDD spins >up. > >However if i try to enter OBP with Stop + A, nothing happens. I tried >the diag mode with Stop + D and tried to reset the settings with Stop + >N. No avail. I tried Ctrl + Break and Alt + Ctrl + Break, also without >avail. Tried to press the power button two times after the beep too. >Nothing. > >If i try to switch the keyboard's LED-s on, nothing happens. I tested >the keyboard in my x86 box and it was just fine, everything worked on >it. > >I have no idea what i am doing wrong. Can anyone help me? > >- TCH -- Sorry for being brief. Alternate email is rickleir at yahoo dot com