The jumpers are fine and i believe the cables are too. Here is the result of "probe-ide": http://oscomp.hu/depot/probe-ide.jpg
John Paul Adrian Glaubitz <glaub...@physik.fu-berlin.de> írta: >On 04/10/2017 09:44 AM, Hartwig Atrops wrote: >> Just out of my head, my Blade 100's are not ready-to-start at the moment: >> the >> DVD drive is on the 2nd IDE connector, try 'boot cdrom2' > >Booting with "boot cdrom" works fine on my Sun Blade 100. I assume that "TCH" >didn't connect his CD-ROM properly or did not properly set the Master and >Slave jumpers. It may also be possible that the IDE cables are broken. > >Basically, he has to perform some hardware troubleshooting to make sure >the CD-ROM is properly connected and configured. There is nothing that >needs to be configured in software to get this working, as far as I know. > >Adrian > >-- > .''`. John Paul Adrian Glaubitz >: :' : Debian Developer - glaub...@debian.org >`. `' Freie Universitaet Berlin - glaub...@physik.fu-berlin.de > `- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913 > >