Joey- I had this same problem and Karl Hammar made a custom kernel with only the driver for the aic7xxx. The kernel is available at:
ftp://kalle.csb.ki.se/pub/vmlinuz-2.0.36-only-aic7xxx He also has a rescue floppy with the said kernel at: ftp://kalle.csb.ki.se/pub/resc1440.bin-only-aic7xxx You're not getting the same errors I was, but the chip is notorious, and this could work. -Eric joey tsai wrote: > > Hi. We have a Adaptec 2940 SCSI card and while > installing Slink we get a repeating error message > "scsi : aborting command due to timeout: pid 0, scsi > 0, channel 0, lun 0, Test unit ready 00 00 00 00 00." > > Also tried the boot option aic7xxx=no_probe option in > install.bat > > The SCSI card also has a Compaq CD-ROM and a Seagate > 1.2 GB drive. It's a Pentium with 32MB RAM. > > If you need any other information, please let me know. > I appreciate your help. > > Joey Tsai > === > joeytsai > e-mail: [EMAIL PROTECTED] > icq #: 4314877 > > _________________________________________________________ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
