Enviat des del meu mòbil LGGràcies. Per camins semblants als que dius, he anat
a parar a la versió 3.16.5 i s'ha instalat sense cap problema, tant al PC fixe
amb Debian 8.0 Jessie com al portàtil de la mitja taronja amb Debian 7.3
Wheezy. A la xarxa wi-fi i tot! I podem imprimir els dos.
------ Missatge original------De:Xavier De Yzaguirre i MauraData:dv., 17 juny
2016 11:10Per a: debian usuaris en CATALA;Cc: Assumpte:Re: Configurar HP
Deskjet 3630
Ull que es una multifunció wi-fi, has d'utilitzar la versió 3.15.6.
trobo aixó:
Model NameMin. HPLIP VersionSupport Level11ParallelUSBNetwork or JetDirect1Scan
to PC3Photo Card Access4PC Send Fax5PC Initiated Copy6Services and
Status7Driver Plug-in8HP Deskjet 3630 All-in-one
Printer3.15.6FullNoYesYesYesNoNoNoYesNoHP Deskjet Ink Advantage 3630 All-in-one
Printer3.15.6FullNoYesYesYesNoNoNoYesNo
All information provided is believed to be accurate but is not
guaranteed.Notes:1 Network support indicates built-in ethernet and/or wireless
networking. Alternatively, many devices may be operatedon the network using an
external JetDirect print server. Not all network configurations are supported.
Please referto the HPLIP FAQs for more information.2 USB mass storage only. You
may mount the photocard as a storage drive over USB only. Refer toyour
distribution's documentation for setup and usage instructions.3 Scan supported
means that PC initiated scan using a SANE compatible software application is
supported over parallel, USB, or network (depending on I/O connection).
Information on digital sending products is covered in note 9, below.4 Photo
supported means that the printer's photo card slots are readable using either
USB mass storage (USB only) or hp-unload (USB, parallel or network).5 Fax
supported means that PC initiated fax send is supported using hp-sendfax, once
an appropria
te CUPS fax queue is set up. Fax support varies on Linux distributions, based
on the availability of python-dbus version 0.80 or greater (versions before
0.80 will not work with HPLIP). Click on the model name of each printer to get
more detailed information.6 Copy supported means that PC initiated copying is
supported using hp-makecopies.7 "Services and status" means that ink/toner
levels, error reporting, and services such as alignment, and color calibration
are available (via the HP Device Manager aka Toolbox).8 ("Required") A
downloadable driver plug-in is required for printing support. ("Optional") A
downloadable driver plug-in is optional for printing support and may increase
the speed, quality, or other aspect of printed output. ("No" or "None") A
driver plug-in is not required nor available. Driver plug-ins are released
under a proprietary (non-open) license and are not part of the HPLIP tarball
release. For more information, please refer to this KB article 9 Device suppor
ts digital sending, not standard scanning protocols. See this KB article for
more info.10 Feature support depends on the specific Linux distribution being
used.11 For a definition of Support Levels, please refer to this KB article.12
For more information, please refer to this KB article.13 The "Summary of
Available Features in Various Linux Distributions" table lists available
features for distros that are supported by the HPLIP automatic tarball
installer. Distros that are not listed will require a manual install procedure
(See this page for more information).14"Qt3" and "Qt4" refer to the supported
UI toolkit. If "Qt3" is indicated, then the distro supports a GUI interface
using the Qt3 UI toolkit. The Qt4 toolkit is not supported for the distro in
this case. If "Qt4" is indicated, then the distro supports a GUI interface
using the Qt4 UI toolkit. In this case, the Qt3 UI toolkit may also be
available and used if desired. The appropriate UI toolkit will be automatically
installed
by the HPLIP installer.15"Recommended" means that the printer is fully
supported in HPLIP and is recommended for use on your Linux system. For
information of what "fully supported" means, see this KB article.
**********************************************************************************
Au, sort.
Xavier De Yzaguirre
xdeyzaguirre(at)gmail(dot)com
El dia 16 de juny de 2016, 22:11, Blackhold <blackholdmai...@gmail.com> ha
escrit:
hplip is your friend...
- Blackhold
http://blackhold.nusepas.com
@blackhold_
~> cal lluitar contra el fort per deixar de ser febles, i contra
nosaltres mateixos quan siguem forts (Esquirols)
<°((( ><
El dia 16 de juny de 2016, 21:01, Daniel <danielal...@mailcat.cat> ha escrit:
> Hola:
>
> He de configurar una HP Deskjet 3630 per fer-la funcionar amb Debian 8
> Jessie. Algú s'hi ha trobat?
>
> Gràcies.
>
> --
> Daniel Elias
> Usuari de Linux nº 461584
>
