Hallo,
bei mir läuft xawtv mit einer Auflösung von "1152x864". Ich möchte aber
"768x576" verwenden.
Dazu habe ich in ~/.xawtv folgendes stehen:
[global]
freqtab = europe-cable
pixsize = 128 x 96
pixcols = 1
jpeg-quality = 75
mjpeg-quality = 50
keypad-ntsc = no
osd = yes
fullscreen = 768 x 576
^^^^^^^^^^^^^^^^^^^^^^
Ich verwende Xfree Version 4.0x und habe in /etc/X11 2
Konfigurationsdateien, XF86Config und XF86Config-4.
In XF86Config steht folgendes:
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-88
VertRefresh 47-130
Modeline "1024x768" 115.50 1024 1056 1248 1440 768 771 781 802 -hsync -vsync
# PAL
Modeline "768x576" 50.00 768 832 856 1000 576 590 595 630 -hsync -vsync
EndSection
...
In Section Screen:
...
DefaultDepth 16
...
SubSection "Display"
Depth 16
Modes "1024x768" "768x576" "1152x864"
EndSubSection
...
In XF86Config-4 steht dann:
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30-88
VertRefresh 47-130
Option "DPMS"
EndSection
Section "Screen"
...
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1152x864" "1024x768" "768x576"
EndSubSection
Wenn
~ $ /usr/bin/xawtv
This is xawtv-3.47, running on Linux/i586 (2.4.4)
x11: 1152x864, 32 bit/pixel, 4608 byte/scanline, DGA
v4l: 1152x864, 32 bit/pixel, 4608 byte/scanline
wmhooks: gnome
invalid value for freqtab: europe-cable
no infrared remote support available
turning fs on
1152 x 864
turning fs off (384x288+765+21)
dann wird eindeutig 1152x864 verwendet.
Wo ist das Problem, und welche XF86Config wird überhaupt verwendet?
Gruß
Uli
--
Ulrich Wiederhold
Clarenbachstraße 1
50931 Köln
phone +49-221-2766619
--
-----------------------------------------------------------
Um sich aus der Liste auszutragen schicken Sie bitte eine
E-Mail an [EMAIL PROTECTED] die im Subject
"unsubscribe <deine_email_adresse>" enthaelt.
Bei Problemen bitte eine Mail an: [EMAIL PROTECTED]
-----------------------------------------------------------
847 eingetragene Mitglieder in dieser Liste.