Bonjour, On Thu, Oct 06, 2005 at 03:17:48PM +0200, mess-mate wrote: > Bonjour, > je viens d'installer une etch sur une partition (hda13) et j'arrive > pas à configurer grub pour le démarrer. > Voici ce que donne grub: > grub> find /boot/grub/stage1 > (hd0,3) > (hd0,11) > (hd0,12) > > ou: find /grub/stage1 > (hd0,1) > (hd1,4 > > La etch est donc sur la hd0,12, hd0,3 est pour la sarge, etc > > Normalement je choisi donc root (hd0,1) > et ensuite setup (hd0) > > mais cela ne marche pas. > > Lors du choix pour etch j'ai l'erreur suivante: > Connaot open root device hda13 or ... > Please append a correct "root=" boot option > ...unable to mount fs on unknown block (0,0) > > Qu'est-ce que j'ai fait de mal à grub ? :( > Avec plusieurs versions de debian sur une même machine, je garde le grub de la première version installée, et je me contente de modifier à la main son /boot/grub/menu.lst pour pouvoir lancer les autres. j'évite donc soigneusement de lancer une autre installation de grub.
Voici pour l'exemple un extrait de mon fichier menu.lst, installé dans la partition sda5. # 0 title Debian GNU/Linux, kernel 2.6.12pia root (hd0,4) kernel /boot/vmlinuz-2.6.12pia root=/dev/sda5 ro initrd /boot/initrd.img-2.6.12pia savedefault boot # 1 title Debian GNU/Linux, kernel 2.6.12pia (recovery mode) root (hd0,4) kernel /boot/vmlinuz-2.6.12pia root=/dev/sda5 ro single initrd /boot/initrd.img-2.6.12pia savedefault boot # 2 title Debian GNU/Linux, kernel 2.6.8-2-386 root (hd0,4) kernel /boot/vmlinuz-2.6.8-2-386 root=/dev/sda5 ro initrd /boot/initrd.img-2.6.8-2-386 savedefault boot # 3 title Debian GNU/Linux, kernel 2.6.8-2-386 (recovery mode) root (hd0,4) kernel /boot/vmlinuz-2.6.8-2-386 root=/dev/sda5 ro single initrd /boot/initrd.img-2.6.8-2-386 savedefault boot # 4 title Debian GNU/Linux (testing/unstable) (on /dev/sda9) debas32test etch 2.6.12 root (hd0,8) kernel /boot/vmlinuz-2.6.12-1-386 root=/dev/sda9 initrd /boot/initrd.img-2.6.12-1-386 savedefault boot # 5 title Debian GNU/Linux (testing/unstable) (on /dev/sda9) debas32test etch 2.6.8 root (hd0,8) kernel /boot/vmlinuz-2.6.8-2-386 root=/dev/sda9 initrd /boot/initrd.img-2.6.8-2-386 savedefault boot # 6 title Debian GNU/Linux (3.1) (on /dev/sda12) debas64test root (hd0,11) kernel /boot/vmlinuz-2.6.12-1-amd64-generic root=/dev/sda12 initrd /boot/initrd.img-2.6.12-1-amd64-generic savedefault boot # 7 title Debian GNU/Linux (3.1) (on /dev/sda13) debas32test root (hd0,12) kernel /boot/vmlinuz-2.6.8-2-386 root=/dev/sda13 initrd /boot/initrd.img-2.6.8-2-386 savedefault boot # 8 # on /dev/sda1 title Microsoft Windows XP Professionnel root (hd0,0) savedefault makeactive chainloader +1 Oui, je sais, c'est un fouilli et il faut que j'y remette un peu d'ordre, mais ça marche. La dernière entrée n'est que très provisoire ... Hope this helps. -- Pierre Meurisse Utilisateur Linux n° 160794 -- Pensez à lire la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Pensez à rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:" To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]