Bonsoir,
Je fais suite a mon precedent mail. Dans les Howto's concernant le Software-RAID, on peut lire un peu partout de surtout checker le "autodetection support" dans le kernel... je ne trouve pas cette option dans le "make xconfig"... Quelqu'un peut-il me dire ou elle se trouve ? En supposant que je l'ai cochee puis recompile mon kernel, je n'arrive toujours pas a savoir si le fichier /etc/raidtab (bref, mes arrays RAID-1) doit etre prepare avant le reboot... je trouve bcp d'infos contradictoires dans les differentes docs et howtos... Merci, Samuel ----- Original Message ----- From: "Samuel Torton" <[EMAIL PROTECTED]> To: "Liste Debian-French" <debian-french@lists.debian.org> Sent: Monday, August 27, 2001 10:30 PM Subject: Kernel panic au boot (2.4.9) > Bonjour, > > J'ai un serveur avec 2 disques SCSI , Distrib Debian Potato : > j'ai tente de compiler puis booter sur un kernel 2.4.9 > (j'ai besoin du support raidtools2). > > - Configuration kernel : OK > (rajoute RAID-1 / retire le Linear, RAID0, RAID4/5 et LVM) > - Compilation kernel : OK > - Installation kernel + modif Lilo : OK > > Au boot : > - Ok pour mon ancien kernel (2.2.17), > - mais sur mon nouveau kernel 2.4.9, j'ai un kernel panic ! > > Voici la fin de mon dmesg : > --------------------------------- > usb [...] > [...] > md : raid1 personality registered > md : md driver 0.90.0 MAX_MD_DEV=256, MD_SB_DISKS=27 > md : Autodetecting RADI arrays > md : Autorun ... > md : ... Autorun done > Net4 : [...] > IP : [...] > [...] > ds : no socket drivers loaded ! > request_module[block_major_8]: Root fs not mounted > VFS : cannot open root device "806" or 08:06 > Please append a correct "root=" boot options > Kernel panic : VFS : unable to mount root fs on 08:06 > --------------------------------- > > Qu'aurais-je oublier de configurer ? > > Voici a quoi ressemble mon Lilo.conf : > --------------------------------- > lba32 > boot=/dev/sda > install=/boot/boot.b > map=/boot/map > message=/boot/bootmess.txt > prompt > single-key > delay=100 > timeout=100 > vga=normal > default=Linux_2.2.17 > image=/vmlinuz_2.2.17 > root=/dev/sda6 > label=Linux_2.2.17 > read-only > alias=1 > image=/vmlinuz_2.4.9 > root=/dev/sda6 > label=Linux_2.4.9 > read-only > optional > alias=2 > --------------------------------- > > > Questions : > > - Devais-je installer les Raidtools2 et configurer ma raidtab AVANT ? > ... Ca m'etonnerait : le probleme est qu'ils ne sont pas supportes par le > 2.2.17 > - Y'a t'il des modules a installer ? ("block-major-8") > - Y'a t'il un pb dans mon lilo.conf ? > - Devais-je patcher mon kernel avec le fameux patch "raid0145" ??? > > Merci pour vos infos, > > -- > Samuel Torton > NCSLab.com > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > >