Bonjour à tous, Voila ma config reseau: n'ayant pas de carte filaire sur mon portable (IBM Thinkpad x21 (carte reseau foutu)) j'ai donc acheté une carte pcmcia D-link (rj45) qui est déclaré comme eth0 ensuite ayant un reseau wifi chez moi j'ai acheté une carte wifi Netgear pcmcia WG511 compatible uniquement avec ndiswrapper, cette carte est déclaré en wlan0, et enfin je souhaiterai pouvoir utiliser ma carte wifi a base Zydas.
Suivant ton conseil j'ai fais un "rmmod ndiswrapper" et un "modprobe -v zd1211 && modprobe -v zd1211b && depmod -a" pour relancer tout cela. Sa m'a donné: 9:09 [EMAIL PROTECTED] /home/gabz# lsmod Module Size Used by zd1211b 280704 0 zd1211 279776 0 ehci_hcd 25192 0 nfsd 82344 13 exportfs 4960 1 nfsd lockd 53672 2 nfsd sunrpc 131620 8 nfsd,lockd agpgart 29244 0 usbhid 25764 0 ide_cd 35296 0 cdrom 32016 1 ide_cd ide_cs 9440 1 uhci_hcd 26640 0 pcmcia 34324 1 ide_cs shpchp 37312 0 usbcore 109152 6 zd1211b,zd1211,ehci_hcd,usbhid,uhci_hcd pci_hotplug 24308 1 shpchp (auparavant j'avais débrancher les cartes reseau et je n'ai réinséré que la carte a base Zydas) Cela me donne: 9:09 [EMAIL PROTECTED] /home/gabz# dmesg Linux version 2.6.16-geekonors ([EMAIL PROTECTED]) (gcc version 4.0.3 (Debian 4. 0.3-1)) #7 Sun Apr 9 14:22:34 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dd400 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000bff0000 (usable) BIOS-e820: 000000000bff0000 - 000000000bffec00 (ACPI data) BIOS-e820: 000000000bffec00 - 000000000c000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 191MB LOWMEM available. On node 0 totalpages: 49136 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 45040 pages, LIFO batch:7 HighMem zone: 0 pages, LIFO batch:0 DMI 2.3 present. Allocating PCI resources starting at 10000000 (gap: 0c000000:f3f80000) Built 1 zonelists Kernel command line: root=/dev/hda1 ro Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (01181000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 497.893 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 192020k/196544k available (1440k kernel code, 4044k reserved, 579k data, 116k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 951.50 BogoMIPS (lpj=1903002) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 0 0000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 0000000 0 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel Pentium III (Coppermine) stepping 06 Checking 'hlt' instruction... OK. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7 PCI: Using configuration type 1 SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI quirk: region 1000-103f claimed by PIIX4 ACPI PCI quirk: region 1040-104f claimed by PIIX4 SMB PIIX4 devres I PIO at 03f0-03f7 PIIX4 devres J PIO at 002e-002f Boot video device is 0000:01:00.0 PCI: Discovered primary peer bus 08 [IRQ] PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0 PCI: Bridge: 0000:00:01.0 IO window: 3000-3fff MEM window: f4100000-f5ffffff PREFETCH window: 18000000-180fffff PCI: Bus 2, cardbus bridge: 0000:00:08.0 IO window: 00001400-000014ff IO window: 00001c00-00001cff PREFETCH window: 10000000-11ffffff MEM window: 12000000-13ffffff PCI: Bus 6, cardbus bridge: 0000:00:08.1 IO window: 00002400-000024ff IO window: 00002800-000028ff PREFETCH window: 14000000-15ffffff MEM window: 16000000-17ffffff PCI: Found IRQ 11 for device 0000:00:08.0 PCI: Sharing IRQ 11 with 0000:00:0b.0 PCI: Sharing IRQ 11 with 0000:01:00.0 PCI: Found IRQ 11 for device 0000:00:08.1 Machine check exception polling timer started. IBM machine detected. Enabling interrupts during APM calls. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Limiting direct PCI/PCI transfers. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, 1.1.3 ipw2100: Copyright(c) 2003-2005 Intel Corporation ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.0.8 ipw2200: Copyright(c) 2003-2005 Intel Corporation STRIP: Version 1.3A-STUART.CHESHIRE (unlimited channels) orinoco 0.15rc3 (David Gibson <[EMAIL PROTECTED]>, Pavel Roskin <pros [EMAIL PROTECTED]>, et al) orinoco_plx 0.15rc3 (Pavel Roskin <[EMAIL PROTECTED]>, David Gibson <[EMAIL PROTECTED] dropbear.id.au>, Daniel Barlow <[EMAIL PROTECTED]>) orinoco_pci 0.15rc3 (Pavel Roskin <[EMAIL PROTECTED]>, David Gibson <[EMAIL PROTECTED] dropbear.id.au> & Jean Tourrilhes <[EMAIL PROTECTED]>) orinoco_tmd 0.15rc3 (Joerg Dorchain <[EMAIL PROTECTED]>) orinoco_nortel 0.15rc3 (Tobias Hoffmann & Christoph Jungegger <[EMAIL PROTECTED] e>) airo: Probing for PCI adapters airo: Finished probing for PCI adapters Loaded prism54 driver, version 1.2 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: HITACHI_DK23BA-10B, ATA DISK drive Probing IDE interface ide1... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: 19640880 sectors (10056 MB) w/512KiB Cache, CHS=20784/15/63 hda: cache flushes not supported hda: hda1 hda2 < hda5 > PCI: Found IRQ 11 for device 0000:00:08.0 PCI: Sharing IRQ 11 with 0000:00:0b.0 PCI: Sharing IRQ 11 with 0000:01:00.0 Yenta: CardBus bridge found at 0000:00:08.0 [1014:0185] Yenta: ISA IRQ mask 0x06b8, PCI irq 11 Socket status: 30000820 PCI: Found IRQ 11 for device 0000:00:08.1 Yenta: CardBus bridge found at 0000:00:08.1 [1014:0185] Yenta: ISA IRQ mask 0x06b8, PCI irq 11 Socket status: 30000810 mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 input: AT Translated Set 2 keyboard as /class/input/input0 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 ieee80211: 802.11 data/management/control stack, git-1.1.7 ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL PROTECTED]> ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' Using IPI Shortcut mode EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. pccard: CardBus card inserted into slot 0 kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 116k freed IBM TrackPoint firmware: 0x0e, buttons: 3/3 pccard: PCMCIA card inserted into slot 1 input: TPPS/2 IBM TrackPoint as /class/input/input1 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 usbcore: registered new driver usbfs usbcore: registered new driver hub shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 USB Universal Host Controller Interface driver v2.3 PCI: Found IRQ 11 for device 0000:00:07.2 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 11, io base 0x00001820 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usb 1-1: new full speed USB device using uhci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice cs: memory probe 0x0c0000-0x0fffff:<6>hub 1-1:1.0: USB hub found hub 1-1:1.0: 2 ports detected excluding 0xc0000-0xcffff 0xd8000-0xfffff cs: memory probe 0x60000000-0x60ffffff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. pcmcia: registering new device pcmcia1.0 usb 1-1.1: new full speed USB device using uhci_hcd and address 3 Probing IDE interface ide1... hdc: SanDisk SDCFB-8, CFA DISK drive ide1 at 0x100-0x107,0x10e on irq 11 hdc: max request size: 128KiB hdc: 15680 sectors (8 MB) w/1KiB Cache, CHS=245/2/32 hdc: hdc1 ide-cs: hdc: Vcc = 3.3, Vpp = 0.0 Adding 433712k swap on /dev/hda5. Priority:-1 extents:1 across:433712k EXT3 FS on hda1, internal journal usb 1-1.1: device descriptor read/64, error -110 ndiswrapper version 1.13 loaded (preempt=no,smp=no) ndiswrapper: driver wg511v2 () loaded PCI: Enabling device 0000:02:00.0 (0000 -> 0002) PCI: Setting latency timer of device 0000:02:00.0 to 64 ndiswrapper: using irq 11 wlan0: vendor: '' wlan0: ndiswrapper ethernet device 00:14:6c:2d:2c:9d using driver wg511v2, 11AB: 1FAA:1385:4E00.5.conf wlan0: encryption modes supported: WEP; TKIP with WPA pcmcia: Detected deprecated PCMCIA ioctl usage. pcmcia: This interface will soon be removed from the kernel; please expect break age unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xf0000-0xfffff cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x600fffff cs: memory probe 0xa0000000-0xa0ffffff: clean. usb 1-1.1: device descriptor read/64, error -110 usb 1-1.1: new full speed USB device using uhci_hcd and address 4 usb 1-1.1: device descriptor read/64, error -110 usb 1-1.1: device descriptor read/64, error -110 usb 1-1.1: new full speed USB device using uhci_hcd and address 5 usb 1-1.1: device not accepting address 5, error -110 usb 1-1.1: new full speed USB device using uhci_hcd and address 6 usb 1-1.1: device not accepting address 6, error -110 usb 1-1.2: new low speed USB device using uhci_hcd and address 7 usb 1-1.2: configuration #1 chosen from 1 choice input: HID 062a:0001 as /class/input/input2 input: USB HID v1.10 Mouse [HID 062a:0001] on usb-0000:00:07.2-1.2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Linux agpgart interface v0.101 (c) Dave Jones Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). usb 1-1.1: new full speed USB device using uhci_hcd and address 8 usb 1-1.1: configuration #1 chosen from 1 choice _____ ____ _ ____ |__ / _| _ \ / \ / ___| / / | | | | | |/ _ \ \___ \ / /| |_| | |_| / ___ \ ___) | /____\__, |____/_/ \_\____/ |___/ zd1211 - version 2.5.0.0 Release Ver = 4330 zd1211:bulk out: wMaxPacketSize = 40 zd1211:bulk in: wMaxPacketSize = 40 zd1211:interrupt in: wMaxPacketSize = 40 zd1211:interrupt in: int_interval = 1 zd1211:bulk out: wMaxPacketSize = 40 EEPORM Ver = 4330 zd1211:USB Download Boot code success zd1211:MAC address = 00:0e:2e:50:78:fb zd1211:AddrEntryTable = f7d4 zd1211:RF_Mode = 00000004 PA type: 0 AiroHa AL2230RF zd1211:Pure B-Mode zd1211:File opening did not success zd1211:AllowedChannel = 000007ff zd1211:LinkLEDn = 200 AllowedChannel = 000107ff Region:48 zd1205: (exit) zd1205_config, /root/ZD1211LnxDrv_2_6_0_0/src/zd1205.c line 2493 zd1205: (exit) zd1205_init, /root/ZD1211LnxDrv_2_6_0_0/src/zd1205.c line 7977 usbcore: registered new driver zd1211 _____ ____ _ ____ |__ / _| _ \ / \ / ___| / / | | | | | |/ _ \ \___ \ / /| |_| | |_| / ___ \ ___) | /____\__, |____/_/ \_\____/ |___/ ZD1211B - version 2.5.0.0 usbcore: registered new driver zd1211b ndiswrapper: device wlan0 removed ndiswrapper version 1.13 loaded (preempt=no,smp=no) ndiswrapper: driver wg511v2 () loaded PCI: Setting latency timer of device 0000:02:00.0 to 64 ndiswrapper: using irq 11 wlan0: vendor: '' wlan0: ndiswrapper ethernet device 00:14:6c:2d:2c:9d using driver wg511v2, 11AB: 1FAA:1385:4E00.5.conf wlan0: encryption modes supported: WEP; TKIP with WPA eth0 (WE) : Driver using old /proc/net/wireless support, please fix driver ! spurious 8259A interrupt: IRQ7. ndiswrapper: device wlan0 removed usbcore: deregistering driver zd1211 zd1211:USB ST Code = -108 usbcore: deregistering driver zd1211b _____ ____ _ ____ |__ / _| _ \ / \ / ___| / / | | | | | |/ _ \ \___ \ / /| |_| | |_| / ___ \ ___) | /____\__, |____/_/ \_\____/ |___/ zd1211 - version 2.5.0.0 Release Ver = 4330 zd1211:bulk out: wMaxPacketSize = 40 zd1211:bulk in: wMaxPacketSize = 40 zd1211:interrupt in: wMaxPacketSize = 40 zd1211:interrupt in: int_interval = 1 zd1211:bulk out: wMaxPacketSize = 40 EEPORM Ver = 4330 zd1211:USB Download Boot code success usb_set_configuration() failed zd1211: probe of 1-1.1:1.0 failed with error -5 usbcore: registered new driver zd1211 _____ ____ _ ____ |__ / _| _ \ / \ / ___| / / | | | | | |/ _ \ \___ \ / /| |_| | |_| / ___ \ ___) | /____\__, |____/_/ \_\____/ |___/ ZD1211B - version 2.5.0.0 usbcore: registered new driver zd1211b usb 1-1.1: USB disconnect, address 8 usbcore: deregistering driver zd1211b usbcore: deregistering driver zd1211 usb 1-1.1: new full speed USB device using uhci_hcd and address 9 usb 1-1.1: configuration #1 chosen from 1 choice _____ ____ _ ____ |__ / _| _ \ / \ / ___| / / | | | | | |/ _ \ \___ \ / /| |_| | |_| / ___ \ ___) | /____\__, |____/_/ \_\____/ |___/ zd1211 - version 2.5.0.0 Release Ver = 4330 zd1211:bulk out: wMaxPacketSize = 40 zd1211:bulk in: wMaxPacketSize = 40 zd1211:interrupt in: wMaxPacketSize = 40 zd1211:interrupt in: int_interval = 1 zd1211:bulk out: wMaxPacketSize = 40 EEPORM Ver = 4330 zd1211:USB Download Boot code success zd1211:MAC address = 00:0e:2e:50:78:fb zd1211:AddrEntryTable = f7d4 zd1211:RF_Mode = 00000004 PA type: 0 AiroHa AL2230RF zd1211:Pure B-Mode zd1211:File opening did not success zd1211:AllowedChannel = 000007ff zd1211:LinkLEDn = 200 AllowedChannel = 000107ff Region:48 zd1205: (exit) zd1205_config, /root/ZD1211LnxDrv_2_6_0_0/src/zd1205.c line 2493 zd1205: (exit) zd1205_init, /root/ZD1211LnxDrv_2_6_0_0/src/zd1205.c line 7977 usbcore: registered new driver zd1211 _____ ____ _ ____ |__ / _| _ \ / \ / ___| / / | | | | | |/ _ \ \___ \ / /| |_| | |_| / ___ \ ___) | /____\__, |____/_/ \_\____/ |___/ ZD1211B - version 2.5.0.0 usbcore: registered new driver zd1211b Voila donc il me semble que le modules est correctement inséré mais quand je fais un : 9:19 [EMAIL PROTECTED] /home/gabz# airmon usage: /usr/sbin/airmon <start|stop> <interface> [channel] Interface Chipset Driver Donc po de carte wifi!!? Aidez moi Pliz -- Pensez à lire la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Pensez à rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:" To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]