mx a écrit :
Le mercredi 03 janvier 2007 à 02:07 +0100, Damelo a écrit :
Bonjour !
Bonjour
Voici mon problème:
[...]
J'ai beau scruter les fichiers de config avec mes différentes doc et le
net mais je sèche.
Que dit dmesg | less ?
Jette un oeil au journaux systèmes dans /var/log
Problème déjà rencontré par une personne de la liste?
Merci d'avance pour votre aide.
N'as tu pas saturé une partition /var ou / ?
mX
Merci, cependant, dmesg | less ne m'a rien appri sur mon problème. Voici
la réponse:
[EMAIL PROTECTED]:~$ dmesg
ata2.00: ata2: dev 0 multi count 16
[ 34.094121] ata2.00: configured for UDMA/100
[ 34.094238] Vendor: ATA Model: HDS722580VLSA80 Rev: V32O
[ 34.095222] Type: Direct-Access ANSI SCSI
revision: 05
[ 34.095448] Vendor: ATA Model: WDC WD3200JD-00K Rev: 08.0
[ 34.096433] Type: Direct-Access ANSI SCSI
revision: 05
[ 34.096636] sata_promise 0000:03:04.0: version 1.04
[ 34.108178] ata3: SATA max UDMA/133 cmd 0xF8CBA200 ctl 0xF8CBA238
bmdma 0x0 irq 23
[ 34.108249] ata4: SATA max UDMA/133 cmd 0xF8CBA280 ctl 0xF8CBA2B8
bmdma 0x0 irq 23
[ 34.108304] scsi2 : sata_promise
[ 34.309793] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 34.465847] ata3.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48
NCQ (depth 0/32)
[ 34.469839] ata3.00: configured for UDMA/133
[ 34.469881] scsi3 : sata_promise
[ 34.671132] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 34.827186] ata4.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48
NCQ (depth 0/32)
[ 34.831178] ata4.00: configured for UDMA/133
[ 34.831272] Vendor: ATA Model: ST3320620AS Rev: 3.AA
[ 34.832256] Type: Direct-Access ANSI SCSI
revision: 05
[ 34.832476] Vendor: ATA Model: ST3320620AS Rev: 3.AA
[ 34.833460] Type: Direct-Access ANSI SCSI
revision: 05
[ 34.833723] SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
[ 34.833775] sda: Write Protect is off
[ 34.833815] sda: Mode Sense: 00 3a 00 00
[ 34.833837] SCSI device sda: drive cache: write back
[ 34.833918] SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
[ 34.833972] sda: Write Protect is off
[ 34.834012] sda: Mode Sense: 00 3a 00 00
[ 34.834030] SCSI device sda: drive cache: write back
[ 34.834071] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 34.914406] sd 0:0:0:0: Attached scsi disk sda
[ 34.914502] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
[ 34.914553] sdb: Write Protect is off
[ 34.914593] sdb: Mode Sense: 00 3a 00 00
[ 34.914611] SCSI device sdb: drive cache: write back
[ 34.914685] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
[ 34.914736] sdb: Write Protect is off
[ 34.914776] sdb: Mode Sense: 00 3a 00 00
[ 34.914798] SCSI device sdb: drive cache: write back
[ 34.914840] sdb: sdb1 sdb2 < sdb5 sdb6 > sdb3
[ 34.950404] sd 1:0:0:0: Attached scsi disk sdb
[ 34.950494] SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
[ 34.950546] sdc: Write Protect is off
[ 34.950586] sdc: Mode Sense: 00 3a 00 00
[ 34.950603] SCSI device sdc: drive cache: write back
[ 34.950679] SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
[ 34.950734] sdc: Write Protect is off
[ 34.950774] sdc: Mode Sense: 00 3a 00 00
[ 34.950791] SCSI device sdc: drive cache: write back
[ 34.951441] sdc: sdc1 sdc2 sdc3 sdc4
[ 34.960780] sd 2:0:0:0: Attached scsi disk sdc
[ 34.960873] SCSI device sdd: 625142448 512-byte hdwr sectors (320073 MB)
[ 34.960924] sdd: Write Protect is off
[ 34.960964] sdd: Mode Sense: 00 3a 00 00
[ 34.960982] SCSI device sdd: drive cache: write back
[ 34.961052] SCSI device sdd: 625142448 512-byte hdwr sectors (320073 MB)
[ 34.961104] sdd: Write Protect is off
[ 34.961144] sdd: Mode Sense: 00 3a 00 00
[ 34.961161] SCSI device sdd: drive cache: write back
[ 34.961202] sdd: sdd1 sdd2 sdd3
[ 34.966215] sd 3:0:0:0: Attached scsi disk sdd
[ 34.968124] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 34.968344] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 34.968486] mice: PS/2 mouse device common for all mice
[ 34.968564] Advanced Linux Sound Architecture Driver Version
1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).
[ 34.968616] ALSA device list:
[ 34.968655] No soundcards found.
[ 34.968710] TCP bic registered
[ 34.968753] NET: Registered protocol family 1
[ 34.968796] NET: Registered protocol family 17
[ 34.968841] Using IPI Shortcut mode
[ 34.969685] Time: tsc clocksource has been installed.
[ 34.973397] kjournald starting. Commit interval 5 seconds
[ 34.973445] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.973516] VFS: Mounted root (ext3 filesystem) readonly.
[ 34.973641] Freeing unused kernel memory: 180k freed
[ 35.019952] input: AT Translated Set 2 keyboard as /class/input/input0
[ 35.189042] logips2pp: Detected unknown logitech mouse model 26
[ 35.638161] Adding 2104472k swap on /dev/sda8. Priority:-1 extents:1
across:2104472k
[ 35.673657] input: ImExPS/2 Logitech Explorer Mouse as
/class/input/input1
[ 35.701724] EXT3 FS on sdc1, internal journal
[ 35.966794] hda: ATAPI 94X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache,
UDMA(66)
[ 35.967095] Uniform CD-ROM driver Revision: 3.20
[ 35.968853] hdb: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache, UDMA(33)
[ 38.759239] ReiserFS: sdd1: found reiserfs format "3.6" with standard
journal
[ 40.129406] ReiserFS: sdd1: warning: CONFIG_REISERFS_CHECK is set ON
[ 40.129455] ReiserFS: sdd1: warning: - it is slow mode for debugging.
[ 40.129498] ReiserFS: sdd1: using ordered data mode
[ 40.144022] ReiserFS: sdd1: journal params: device sdd1, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
[ 40.144445] ReiserFS: sdd1: checking transaction log (sdd1)
[ 40.144489] ReiserFS: sdd1: journal-1153: found in header:
first_unflushed_offset 7082, last_flushed_trans_id 74411
[ 40.152464] ReiserFS: sdd1: journal-1206: Starting replay from offset
319597106437034, trans_id 0
[ 40.152468] ReiserFS: sdd1: journal-1299: Setting newest_mount_id to 18
[ 40.173015] ReiserFS: sdd1: Using r5 hash to sort names
[ 40.226100] kjournald starting. Commit interval 5 seconds
[ 40.226363] EXT3 FS on sdd3, internal journal
[ 40.226435] EXT3-fs: mounted filesystem with ordered data mode.
[ 40.246849] kjournald starting. Commit interval 5 seconds
[ 40.247111] EXT3 FS on sdc4, internal journal
[ 40.247184] EXT3-fs: mounted filesystem with ordered data mode.
[ 40.285424] kjournald starting. Commit interval 5 seconds
[ 40.285595] EXT3 FS on sdd2, internal journal
[ 40.285667] EXT3-fs: mounted filesystem with ordered data mode.
[ 40.313277] kjournald starting. Commit interval 5 seconds
[ 40.313653] EXT3 FS on sdb1, internal journal
[ 40.313725] EXT3-fs: mounted filesystem with ordered data mode.
[ 40.466769] XFS mounting filesystem sda10
[ 40.574676] Ending clean XFS mount for filesystem: sda10
[ 40.587649] kjournald starting. Commit interval 5 seconds
[ 40.587781] EXT3 FS on sdc3, internal journal
[ 40.587854] EXT3-fs: mounted filesystem with ordered data mode.
[ 40.627010] kjournald starting. Commit interval 5 seconds
[ 40.627165] EXT3 FS on sdc2, internal journal
[ 40.627240] EXT3-fs: mounted filesystem with ordered data mode.
[ 40.655529] ReiserFS: sda3: found reiserfs format "3.6" with standard
journal
[ 41.289185] ReiserFS: sda3: warning: CONFIG_REISERFS_CHECK is set ON
[ 41.289229] ReiserFS: sda3: warning: - it is slow mode for debugging.
[ 41.289272] ReiserFS: sda3: using ordered data mode
[ 41.298830] ReiserFS: sda3: journal params: device sda3, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
[ 41.299261] ReiserFS: sda3: checking transaction log (sda3)
[ 41.299311] ReiserFS: sda3: journal-1153: found in header:
first_unflushed_offset 4757, last_flushed_trans_id 553
[ 41.305948] ReiserFS: sda3: journal-1206: Starting replay from offset
2379411886741, trans_id 0
[ 41.305952] ReiserFS: sda3: journal-1299: Setting newest_mount_id to 18
[ 41.326553] ReiserFS: sda3: Using r5 hash to sort names
[ 41.365884] kjournald starting. Commit interval 5 seconds
[ 41.366172] EXT3 FS on sda9, internal journal
[ 41.366248] EXT3-fs: mounted filesystem with ordered data mode.
[ 41.384565] ReiserFS: sda5: found reiserfs format "3.6" with standard
journal
[ 41.470860] ReiserFS: sda5: warning: CONFIG_REISERFS_CHECK is set ON
[ 41.470903] ReiserFS: sda5: warning: - it is slow mode for debugging.
[ 41.470945] ReiserFS: sda5: using ordered data mode
[ 41.487029] ReiserFS: sda5: journal params: device sda5, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
[ 41.487479] ReiserFS: sda5: checking transaction log (sda5)
[ 41.487523] ReiserFS: sda5: journal-1153: found in header:
first_unflushed_offset 2511, last_flushed_trans_id 86982
[ 41.490173] ReiserFS: sda5: journal-1206: Starting replay from offset
373589140310479, trans_id 0
[ 41.490177] ReiserFS: sda5: journal-1299: Setting newest_mount_id to 18
[ 41.496819] ReiserFS: sda5: Using r5 hash to sort names
[ 41.559064] loop: loaded (max 8 devices)
[ 41.605328] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 41.633596] ISO 9660 Extensions: RRIP_1991A
[ 41.647490] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 41.672427] ISO 9660 Extensions: RRIP_1991A
[ 42.500171] usbcore: registered new driver usbfs
[ 42.500249] usbcore: registered new driver hub
[ 42.501324] USB Universal Host Controller Interface driver v3.0
[ 42.501422] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 42.501426] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 42.501544] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 1
[ 42.501612] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ef00
[ 42.501770] usb usb1: configuration #1 chosen from 1 choice
[ 42.501850] hub 1-0:1.0: USB hub found
[ 42.501895] hub 1-0:1.0: 2 ports detected
[ 42.602731] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 42.602734] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 42.602810] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 2
[ 42.602876] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ef20
[ 42.603021] usb usb2: configuration #1 chosen from 1 choice
[ 42.603094] hub 2-0:1.0: USB hub found
[ 42.603139] hub 2-0:1.0: 2 ports detected
[ 42.704526] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 42.704530] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 42.704602] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 3
[ 42.704666] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef40
[ 42.704811] usb usb3: configuration #1 chosen from 1 choice
[ 42.704885] hub 3-0:1.0: USB hub found
[ 42.704929] hub 3-0:1.0: 2 ports detected
[ 42.806339] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 42.806343] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 42.806416] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 4
[ 42.806482] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef80
[ 42.806631] usb usb4: configuration #1 chosen from 1 choice
[ 42.806704] hub 4-0:1.0: USB hub found
[ 42.806748] hub 4-0:1.0: 2 ports detected
[ 42.808254] usb 1-1: new full speed USB device using uhci_hcd and
address 2
[ 42.947434] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 42.947440] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 42.947525] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 5
[ 42.947602] ehci_hcd 0000:00:1d.7: debug port 1
[ 42.947647] PCI: cache line size of 128 is not supported by device
0000:00:1d.7
[ 42.947654] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
[ 42.951565] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 42.951705] usb usb5: configuration #1 chosen from 1 choice
[ 42.951781] hub 5-0:1.0: USB hub found
[ 42.951826] hub 5-0:1.0: 8 ports detected
[ 42.958855] usb 1-1: string descriptor 0 read error: -71
[ 42.966840] usb 1-1: string descriptor 0 read error: -71
[ 42.966953] usb 1-1: configuration #1 chosen from 1 choice
[ 42.970833] usb 1-1: can't set config #1, error -71
[ 43.074783] usb 1-1: USB disconnect, address 2
[ 43.591826] usb 5-1: new high speed USB device using ehci_hcd and
address 2
[ 43.664086] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full
Duplex
[ 43.722053] usb 5-1: configuration #1 chosen from 1 choice
[ 43.722229] hub 5-1:1.0: USB hub found
[ 43.722449] hub 5-1:1.0: 1 port detected
[ 44.454375] usb 5-1.1: new high speed USB device using ehci_hcd and
address 6
[ 44.544534] usb 5-1.1: configuration #1 chosen from 1 choice
[ 44.750703] usb 1-2: new low speed USB device using uhci_hcd and
address 3
[ 44.919401] usb 1-2: configuration #1 chosen from 1 choice
[ 45.128011] usb 2-2: new low speed USB device using uhci_hcd and
address 2
[ 45.297136] usb 2-2: configuration #1 chosen from 1 choice
[ 45.506320] usb 3-2: new full speed USB device using uhci_hcd and
address 2
[ 45.683403] usb 3-2: configuration #1 chosen from 1 choice
[ 49.885040] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 50.238666] ALSA sound/pci/ac97/ac97_codec.c:1990: AC'97 0 analog
subsections not ready
[ 50.301553] intel8x0_measure_ac97_clock: measured 51064 usecs
[ 50.301596] intel8x0: clocking to 48000
[ 51.715349] Initializing USB Mass Storage driver...
[ 51.715615] usb-storage: USB Mass Storage device detected
[ 51.715738] usb-storage: -- associate_dev
[ 51.715868] usb-storage: Vendor: 0x067b, Product: 0x2517, Revision:
0x0100
[ 51.715972] usb-storage: Interface Subclass: 0x05, Protocol: 0x50
[ 51.716075] usb-storage: Transport: Bulk
[ 51.716170] usb-storage: Protocol: 8070i
[ 51.716276] usb-storage: *** thread sleeping.
[ 51.716375] scsi4 : SCSI emulation for USB Mass Storage devices
[ 51.716566] usb-storage: device found at 6
[ 51.716568] usb-storage: waiting for device to settle before scanning
[ 51.716774] usbcore: registered new driver usb-storage
[ 51.716911] USB Mass Storage support registered.
[ 52.679990] NET: Registered protocol family 10
[ 52.680603] IPv6 over IPv4 tunneling driver
[ 56.706847] usb-storage: usb_stor_control_msg: rq=fe rqtype=a1
value=0000 index=00 len=1
[ 56.707047] usb-storage: GetMaxLUN command result is 1, data is 0
[ 56.707087] usb-storage: queuecommand called
[ 56.707092] usb-storage: *** thread awakened.
[ 56.707095] usb-storage: Command INQUIRY (6 bytes)
[ 56.707096] usb-storage: 12 00 00 00 24 00
[ 56.707102] usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128
Trg 0 LUN 0 CL 12
[ 56.707105] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 56.707169] usb-storage: Status code 0; transferred 31/31
[ 56.707171] usb-storage: -- transfer complete
[ 56.707172] usb-storage: Bulk command transfer result=0
[ 56.707175] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36
bytes, 1 entries
[ 56.707916] usb-storage: Status code 0; transferred 36/36
[ 56.707918] usb-storage: -- transfer complete
[ 56.707920] usb-storage: Bulk data transfer result 0x0
[ 56.707922] usb-storage: Attempting to get CSW...
[ 56.707923] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 56.708039] usb-storage: Status code 0; transferred 13/13
[ 56.708041] usb-storage: -- transfer complete
[ 56.708043] usb-storage: Bulk status result = 0
[ 56.708045] usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0
[ 56.708047] usb-storage: scsi cmd done, result=0x0
[ 56.708050] usb-storage: *** thread sleeping.
[ 56.708623] Vendor: Corsair Model: Flash Voyager Rev: 1.00
[ 56.709632] Type: Direct-Access ANSI SCSI
revision: 00
[ 56.709828] usb-storage: queuecommand called
[ 56.709836] usb-storage: *** thread awakened.
[ 56.709838] usb-storage: Command TEST_UNIT_READY (6 bytes)
[ 56.709839] usb-storage: 00 00 00 00 00 00
[ 56.709845] usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg
0 LUN 0 CL 12
[ 56.709847] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 56.709915] usb-storage: Status code 0; transferred 31/31
[ 56.709917] usb-storage: -- transfer complete
[ 56.709918] usb-storage: Bulk command transfer result=0
[ 56.709920] usb-storage: Attempting to get CSW...
[ 56.709922] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 56.710285] usb-storage: Status code 0; transferred 13/13
[ 56.710287] usb-storage: -- transfer complete
[ 56.710289] usb-storage: Bulk status result = 0
[ 56.710291] usb-storage: Bulk Status S 0x53425355 T 0x2 R 0 Stat 0x0
[ 56.710293] usb-storage: scsi cmd done, result=0x0
[ 56.710295] usb-storage: *** thread sleeping.
[ 56.710610] usb-storage: queuecommand called
[ 56.710614] usb-storage: *** thread awakened.
[ 56.710616] usb-storage: Command READ_CAPACITY (10 bytes)
[ 56.710618] usb-storage: 25 00 00 00 00 00 00 00 00 00
[ 56.710625] usb-storage: Bulk Command S 0x43425355 T 0x3 L 8 F 128
Trg 0 LUN 0 CL 12
[ 56.710627] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 56.710788] usb-storage: Status code 0; transferred 31/31
[ 56.710790] usb-storage: -- transfer complete
[ 56.710792] usb-storage: Bulk command transfer result=0
[ 56.710794] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes,
1 entries
[ 56.711034] usb-storage: Status code 0; transferred 8/8
[ 56.711037] usb-storage: -- transfer complete
[ 56.711038] usb-storage: Bulk data transfer result 0x0
[ 56.711040] usb-storage: Attempting to get CSW...
[ 56.711041] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 56.711159] usb-storage: Status code 0; transferred 13/13
[ 56.711161] usb-storage: -- transfer complete
[ 56.711162] usb-storage: Bulk status result = 0
[ 56.711164] usb-storage: Bulk Status S 0x53425355 T 0x3 R 0 Stat 0x0
[ 56.711166] usb-storage: scsi cmd done, result=0x0
[ 56.711168] usb-storage: *** thread sleeping.
[ 56.711605] SCSI device sde: 2002944 512-byte hdwr sectors (1026 MB)
[ 56.711653] usb-storage: queuecommand called
[ 56.711657] usb-storage: *** thread awakened.
[ 56.711659] usb-storage: Command MODE_SENSE_10 (10 bytes)
[ 56.711661] usb-storage: 5a 00 3f 00 00 00 00 00 c0 00
[ 56.711668] usb-storage: Bulk Command S 0x43425355 T 0x4 L 192 F 128
Trg 0 LUN 0 CL 12
[ 56.711670] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 56.711785] usb-storage: Status code 0; transferred 31/31
[ 56.711788] usb-storage: -- transfer complete
[ 56.711789] usb-storage: Bulk command transfer result=0
[ 56.711791] usb-storage: usb_stor_bulk_transfer_sglist: xfer 192
bytes, 1 entries
[ 56.714407] usb-storage: Status code -121; transferred 40/192
[ 56.714409] usb-storage: -- short read transfer
[ 56.714411] usb-storage: Bulk data transfer result 0x1
[ 56.714413] usb-storage: Attempting to get CSW...
[ 56.714414] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 56.714653] usb-storage: Status code 0; transferred 13/13
[ 56.714655] usb-storage: -- transfer complete
[ 56.714656] usb-storage: Bulk status result = 0
[ 56.714658] usb-storage: Bulk Status S 0x53425355 T 0x4 R 152 Stat 0x0
[ 56.714660] usb-storage: scsi cmd done, result=0x0
[ 56.714662] usb-storage: *** thread sleeping.
[ 56.714830] sde: Write Protect is off
[ 56.714872] sde: Mode Sense: 00 26 00 00
[ 56.714874] sde: assuming drive cache: write through
[ 56.714940] usb-storage: queuecommand called
[ 56.714945] usb-storage: *** thread awakened.
[ 56.714947] usb-storage: Command TEST_UNIT_READY (6 bytes)
[ 56.714948] usb-storage: 00 00 00 00 00 00
[ 56.714953] usb-storage: Bulk Command S 0x43425355 T 0x5 L 0 F 0 Trg
0 LUN 0 CL 12
[ 56.714955] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 56.715029] usb-storage: Status code 0; transferred 31/31
[ 56.715031] usb-storage: -- transfer complete
[ 56.715033] usb-storage: Bulk command transfer result=0
[ 56.715034] usb-storage: Attempting to get CSW...
[ 56.715036] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 56.715276] usb-storage: Status code 0; transferred 13/13
[ 56.715278] usb-storage: -- transfer complete
[ 56.715280] usb-storage: Bulk status result = 0
[ 56.715282] usb-storage: Bulk Status S 0x53425355 T 0x5 R 0 Stat 0x0
[ 56.715284] usb-storage: scsi cmd done, result=0x0
[ 56.715286] usb-storage: *** thread sleeping.
[ 56.715599] usb-storage: queuecommand called
[ 56.715602] usb-storage: *** thread awakened.
[ 56.715604] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[ 56.715606] usb-storage: 1e 00 00 00 01 00
[ 56.715611] usb-storage: Bulk Command S 0x43425355 T 0x6 L 0 F 0 Trg
0 LUN 0 CL 12
[ 56.715613] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 56.715778] usb-storage: Status code 0; transferred 31/31
[ 56.715780] usb-storage: -- transfer complete
[ 56.715781] usb-storage: Bulk command transfer result=0
[ 56.715783] usb-storage: Attempting to get CSW...
[ 56.715785] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 56.716024] usb-storage: Status code 0; transferred 13/13
[ 56.716026] usb-storage: -- transfer complete
[ 56.716028] usb-storage: Bulk status result = 0
[ 56.716030] usb-storage: Bulk Status S 0x53425355 T 0x6 R 0 Stat 0x1
[ 56.716032] usb-storage: -- transport indicates command failure
[ 56.716034] usb-storage: Issuing auto-REQUEST_SENSE
[ 56.716036] usb-storage: Bulk Command S 0x43425355 T 0x7 L 18 F 128
Trg 0 LUN 0 CL 12
[ 56.716038] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 56.716152] usb-storage: Status code 0; transferred 31/31
[ 56.716154] usb-storage: -- transfer complete
[ 56.716155] usb-storage: Bulk command transfer result=0
[ 56.716157] usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
[ 56.716399] usb-storage: Status code 0; transferred 18/18
[ 56.716401] usb-storage: -- transfer complete
[ 56.716403] usb-storage: Bulk data transfer result 0x0
[ 56.716404] usb-storage: Attempting to get CSW...
[ 56.716406] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 56.716524] usb-storage: Status code 0; transferred 13/13
[ 56.716526] usb-storage: -- transfer complete
[ 56.716528] usb-storage: Bulk status result = 0
[ 56.716530] usb-storage: Bulk Status S 0x53425355 T 0x7 R 0 Stat 0x0
[ 56.716532] usb-storage: -- Result from auto-sense is 0
[ 56.716534] usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0
[ 56.716536] usb-storage: (Unknown Key): (unknown ASC/ASCQ)
[ 56.716539] usb-storage: scsi cmd done, result=0x2
[ 56.716540] usb-storage: *** thread sleeping.
[ 56.716605] usb-storage: queuecommand called
[ 56.716609] usb-storage: *** thread awakened.
[ 56.716611] usb-storage: Command TEST_UNIT_READY (6 bytes)
[ 56.716613] usb-storage: 00 00 00 00 00 00
[ 56.716618] usb-storage: Bulk Command S 0x43425355 T 0x8 L 0 F 0 Trg
0 LUN 0 CL 12
[ 56.716620] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 56.716775] usb-storage: Status code 0; transferred 31/31
[ 56.716778] usb-storage: -- transfer complete
[ 56.716779] usb-storage: Bulk command transfer result=0
[ 56.716781] usb-storage: Attempting to get CSW...
[ 56.716782] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 56.717023] usb-storage: Status code 0; transferred 13/13
[ 56.717025] usb-storage: -- transfer complete
[ 56.717026] usb-storage: Bulk status result = 0
[ 56.717028] usb-storage: Bulk Status S 0x53425355 T 0x8 R 0 Stat 0x0
[ 56.717030] usb-storage: scsi cmd done, result=0x0
[ 56.717032] usb-storage: *** thread sleeping.
[ 56.717596] usb-storage: queuecommand called
[ 56.717600] usb-storage: *** thread awakened.
[ 56.717602] usb-storage: Command READ_CAPACITY (10 bytes)
[ 56.717604] usb-storage: 25 00 00 00 00 00 00 00 00 00
[ 56.717611] usb-storage: Bulk Command S 0x43425355 T 0x9 L 8 F 128
Trg 0 LUN 0 CL 12
[ 56.717613] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 56.717774] usb-storage: Status code 0; transferred 31/31
[ 56.717776] usb-storage: -- transfer complete
[ 56.717778] usb-storage: Bulk command transfer result=0
[ 56.717780] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes,
1 entries
[ 56.718021] usb-storage: Status code 0; transferred 8/8
[ 56.718023] usb-storage: -- transfer complete
[ 56.718025] usb-storage: Bulk data transfer result 0x0
[ 56.718026] usb-storage: Attempting to get CSW...
[ 56.718028] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 56.718146] usb-storage: Status code 0; transferred 13/13
[ 56.718148] usb-storage: -- transfer complete
[ 56.718149] usb-storage: Bulk status result = 0
[ 56.718151] usb-storage: Bulk Status S 0x53425355 T 0x9 R 0 Stat 0x0
[ 56.718153] usb-storage: scsi cmd done, result=0x0
[ 56.718155] usb-storage: *** thread sleeping.
[ 56.718592] SCSI device sde: 2002944 512-byte hdwr sectors (1026 MB)
[ 56.718640] usb-storage: queuecommand called
[ 56.718643] usb-storage: *** thread awakened.
[ 56.718645] usb-storage: Command MODE_SENSE_10 (10 bytes)
[ 56.718647] usb-storage: 5a 00 3f 00 00 00 00 00 c0 00
[ 56.718654] usb-storage: Bulk Command S 0x43425355 T 0xa L 192 F 128
Trg 0 LUN 0 CL 12
[ 56.718656] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 56.718773] usb-storage: Status code 0; transferred 31/31
[ 56.718775] usb-storage: -- transfer complete
[ 56.718776] usb-storage: Bulk command transfer result=0
[ 56.718779] usb-storage: usb_stor_bulk_transfer_sglist: xfer 192
bytes, 1 entries
[ 56.721394] usb-storage: Status code -121; transferred 40/192
[ 56.721396] usb-storage: -- short read transfer
[ 56.721397] usb-storage: Bulk data transfer result 0x1
[ 56.721399] usb-storage: Attempting to get CSW...
[ 56.721401] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 56.721640] usb-storage: Status code 0; transferred 13/13
[ 56.721642] usb-storage: -- transfer complete
[ 56.721643] usb-storage: Bulk status result = 0
[ 56.721645] usb-storage: Bulk Status S 0x53425355 T 0xa R 152 Stat 0x0
[ 56.721647] usb-storage: scsi cmd done, result=0x0
[ 56.721649] usb-storage: *** thread sleeping.
[ 56.721820] sde: Write Protect is off
[ 56.721861] sde: Mode Sense: 00 26 00 00
[ 56.721863] sde: assuming drive cache: write through
[ 56.721904] sde:<7>usb-storage: queuecommand called
[ 56.721992] usb-storage: *** thread awakened.
[ 56.721995] usb-storage: Command READ_10 (10 bytes)
[ 56.721996] usb-storage: 28 00 00 00 00 00 00 00 08 00
[ 56.722003] usb-storage: Bulk Command S 0x43425355 T 0xb L 4096 F 128
Trg 0 LUN 0 CL 12
[ 56.722005] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 56.722141] usb-storage: Status code 0; transferred 31/31
[ 56.722143] usb-storage: -- transfer complete
[ 56.722145] usb-storage: Bulk command transfer result=0
[ 56.722147] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096
bytes, 1 entries
[ 56.764821] usb-storage: Status code 0; transferred 4096/4096
[ 56.764826] usb-storage: -- transfer complete
[ 56.764828] usb-storage: Bulk data transfer result 0x0
[ 56.764830] usb-storage: Attempting to get CSW...
[ 56.764832] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 56.765062] usb-storage: Status code 0; transferred 13/13
[ 56.765064] usb-storage: -- transfer complete
[ 56.765066] usb-storage: Bulk status result = 0
[ 56.765068] usb-storage: Bulk Status S 0x53425355 T 0xb R 0 Stat 0x0
[ 56.765070] usb-storage: scsi cmd done, result=0x0
[ 56.765073] usb-storage: *** thread sleeping.
[ 56.765519] sde1
[ 56.765694] sd 4:0:0:0: Attached scsi removable disk sde
[ 56.765810] usb-storage: queuecommand called
[ 56.765815] usb-storage: *** thread awakened.
[ 56.765817] usb-storage: Bad target number (1:0)
[ 56.765819] usb-storage: scsi cmd done, result=0x40000
[ 56.765821] usb-storage: *** thread sleeping.
[ 56.766533] usb-storage: queuecommand called
[ 56.766537] usb-storage: *** thread awakened.
[ 56.766539] usb-storage: Bad target number (2:0)
[ 56.766541] usb-storage: scsi cmd done, result=0x40000
[ 56.766542] usb-storage: *** thread sleeping.
[ 56.766757] usb-storage: queuecommand called
[ 56.766761] usb-storage: *** thread awakened.
[ 56.766763] usb-storage: Bad target number (3:0)
[ 56.766765] usb-storage: scsi cmd done, result=0x40000
[ 56.766767] usb-storage: *** thread sleeping.
[ 56.767527] usb-storage: queuecommand called
[ 56.767531] usb-storage: *** thread awakened.
[ 56.767533] usb-storage: Bad target number (4:0)
[ 56.767534] usb-storage: scsi cmd done, result=0x40000
[ 56.767536] usb-storage: *** thread sleeping.
[ 56.767756] usb-storage: queuecommand called
[ 56.767760] usb-storage: *** thread awakened.
[ 56.767762] usb-storage: Bad target number (5:0)
[ 56.767764] usb-storage: scsi cmd done, result=0x40000
[ 56.767766] usb-storage: *** thread sleeping.
[ 56.768522] usb-storage: queuecommand called
[ 56.768526] usb-storage: *** thread awakened.
[ 56.768528] usb-storage: Bad target number (6:0)
[ 56.768530] usb-storage: scsi cmd done, result=0x40000
[ 56.768532] usb-storage: *** thread sleeping.
[ 56.768753] usb-storage: queuecommand called
[ 56.768757] usb-storage: *** thread awakened.
[ 56.768758] usb-storage: Bad target number (7:0)
[ 56.768760] usb-storage: scsi cmd done, result=0x40000
[ 56.768762] usb-storage: *** thread sleeping.
[ 56.769506] usb-storage: device scan complete
[ 62.943437] eth0: no IPv6 routers present
[ 186.888119] hdb: drive_cmd: status=0x41 { DriveReady Error }
[ 186.888127] hdb: drive_cmd: error=0x04 { AbortedCommand }
[ 186.888130] ide: failed opcode was: 0xe5
[ 186.888596] hdb: drive_cmd: status=0x41 { DriveReady Error }
[ 186.888602] hdb: drive_cmd: error=0x04 { AbortedCommand }
[ 186.888604] ide: failed opcode was: 0x98
[ 186.888943] hdb: drive_cmd: status=0x41 { DriveReady Error }
[ 186.888949] hdb: drive_cmd: error=0x04 { AbortedCommand }
[ 186.888951] ide: failed opcode was: 0xb0
[ 186.892861] hda: drive_cmd: status=0x41 { DriveReady Error }
[ 186.892867] hda: drive_cmd: error=0x04 { AbortedCommand }
[ 186.892870] ide: failed opcode was: 0xe5
[ 186.893221] hda: drive_cmd: status=0x41 { DriveReady Error }
[ 186.893227] hda: drive_cmd: error=0x04 { AbortedCommand }
[ 186.893230] ide: failed opcode was: 0x98
[ 186.893567] hda: drive_cmd: status=0x41 { DriveReady Error }
[ 186.893573] hda: drive_cmd: error=0x04 { AbortedCommand }
[ 186.893576] ide: failed opcode was: 0xb0
[ 1287.395809] drivers/usb/class/usblp.c: usblp0: USB Bidirectional
printer dev 2 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0808
[ 1287.395857] usbcore: registered new driver usblp
[ 1287.395876] drivers/usb/class/usblp.c: v0.13: USB Printer Device
Class driver
[ 4148.023074] i2c_adapter i2c-9191: ISA main adapter registered
[ 7603.909661] Linux agpgart interface v0.101 (c) Dave Jones
[46085.899001] usb 3-2: USB disconnect, address 2
[46085.899273] drivers/usb/class/usblp.c: usblp0: removed
[46110.966158] usb 3-2: new full speed USB device using uhci_hcd and
address 3
[46111.145224] usb 3-2: configuration #1 chosen from 1 choice
[46111.163115] drivers/usb/class/usblp.c: usblp0: USB Bidirectional
printer dev 3 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0808
Et mes partitions ont toutes suffisament d'espace disque.
Je suis obligé de recharger mes modules à la main (modprobe) et un
updates-modules ne change rien. je doit les recharger a chaque fois.
Merci.
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Vous pouvez aussi ajouter le mot ``spam'' dans vos champs "From" et
"Reply-To:"
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]