Bonjour J'essaye d'installer les drivers proprio de ATI pour ma carte Radeon 9200 PRO en suivant les opérations du liens suivant : http://www.brabbel.net/wp/archives/120 (Est-ce que le problème pour etre lié à ce biung ?)
J'utlise le noyau suivant ~$ uname -a Linux hoth 2.6.26-1-amd64 #1 SMP Sat Nov 8 18:25:23 UTC 2008 x86_64 GNU/Linux Ma carte est bien reconnu par le système #lspci 00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev a1) 00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management (rev a1) 00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) 00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0 Controller (rev a2) 00:05.0 Bridge: nVidia Corporation CK8S Ethernet Controller (rev a2) 00:06.0 Multimedia audio controller: nVidia Corporation nForce3 250Gb AC'97 Audi o Controller (rev a1) 00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller (v2.5) (r ev a2) 00:09.0 IDE interface: nVidia Corporation nForce3 Serial ATA Controller 2 (rev a 2) 00:0a.0 IDE interface: nVidia Corporation nForce3 Serial ATA Controller (rev a2) 00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2) 00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTra nsport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Con troller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscella neous Control 01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01) 01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Second ary) (rev 01) 02:07.0 Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01) 02:0c.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OH CI Link Layer Controller (rev 46) 02:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Et hernet (rev 10) J'utilise les paquets suivants $ dpkg -l | grep fglrx ii fglrx-atieventsd 1:8-7-3 external events daemon for the non-free AMD/ATI r5xx, r6xx dis rc fglrx-control 1:8-7-2 control panel for the non-free AMD/ATI r5xx, r6xx display driv ii fglrx-driver 1:8-7-3 non-free AMD/ATI r5xx, r6xx display driver ii fglrx-glx 1:8-7-3 proprietary libGL for the non-free AMD/ATI r5xx, r6xx display ii fglrx-glx-ia32 1:8-7-3 proprietary libGL for the non-free AMD/ATI r5xx, r6xx display ii fglrx-kernel-2.6.26-1-amd64 1:8-7-3+2.6.26-10 ATI binary kernel module for Linux 2.6.26-1-amd64 ii fglrx-source 1:8-7-3 kernel module source for the non-free AMD/ATI r5xx, r6xx displ Issu de ces dépots cat /etc/apt/sources.list deb http://ftp.fr.debian.org/debian/ lenny main non-free contrib deb-src http://ftp.fr.debian.org/debian/ lenny main non-free contrib deb http://security.debian.org/ lenny/updates main non-free contrib deb-src http://security.debian.org/ lenny/updates main non-free contrib deb http://www.debian-multimedia.org lenny main deb-src http://www.debian-multimedia.org lenny main deb http://ftp.fr.debian.org/debian/ sid main non-free contrib deb-src http://ftp.fr.debian.org/debian/ sid main non-free contrib deb http://www.debian-multimedia.org sid main deb-src http://www.debian-multimedia.org sid main Par contre des que j'essaye d'installer le module voici le résultat (rien de plus dans dmesg) $modprobe fglrx [ 741.190096] [fglrx] PAT is disabled! [ 741.190101] [fglrx:firegl_init_module] *ERROR* firegl_stub_register failed Du coup je continues à utiliser le module radeon. Est-ce que j'ai suivi les bonnes étapes ? Comment faire pour investiguer un peu plus ? Merci d'avance pour votre aide Bon week-end AC -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs "From" et "Reply-To:" To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
