Hello Me mettant en tete de comprendre comment fonctionnait un peu hdparm suite au thread des semaines précédentes, je fais un simple :
mehari:~# hdparm /dev/hda /dev/hda: multcount = 0 (off) I/O support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead = 8 (on) geometry = 1757/255/63, sectors = 28229040, start = 0 HDIO_GET_BUSSTATE failed: Input/output error On voit donc que j'ai touché a rien, hdparm est tout sauf optimisé. Mais c'est quoi, ce "HDIO_GET_BUSSTATE failed: Input/output error" ? HD=Hard Disk ... ? IO=Input/Output ... ? GET_BUSSTATE= etat du bus ... ? C'est grave une erreur d'I/O de bus d'un HDD ? Google dit pas grand chose à ce propos (rien). Les infos sur le HDD par hdparm sont : Model=IBM-DTTA-371440, FwRev=T71OA73A, SerialNo=WK0WK193348 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=34 BuffType=DualPortCache, BuffSize=462kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=28229040 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 *mdma2 udma0 udma1 udma2 AdvancedPM=no WriteCache=enabled Drive Supports : ATA/ATAPI-4 T13 1153D revision 17 : ATA-1 ATA-2 ATA-3 ATA-4 Merci de m'eclairer ... +++ Stef