Merci à tous pour vos réponses. À ce stade, j'ai deux pistes à explorer (sans aucun ordre de préférence ou de priorité): 1- le pilote video n'est pas correctement installé 2- le système n'arrive pas à obtenir les données correctes du moniteur
Pour la piste 1: Est-il opportun d'observer le module i915 ? Si oui, j'ai: # lsmod|grep i915 i915 3936256 0 drm_buddy 20480 1 i915 i2c_algo_bit 12288 1 i915 drm_display_helper 233472 1 i915 cec 69632 2 drm_display_helper,i915 ttm 106496 1 i915 drm_kms_helper 270336 2 drm_display_helper,i915 drm 765952 5 drm_kms_helper,drm_display_helper,drm_buddy,i915,ttm video 73728 1 i915 Comment interpréter le 0 après la taille du module ? Sur un autre NUC Intel, j'ai une valeur 1. Puisqu'ici la machine a un processeur Alder Lake N305, elle intègre un circuit graphique UHD. lspci -vnn | grep -A12 '\''[030[02]\]' | grep -Ei "vga|3d|display|kernel" 00:02.0 VGA compatible controller [0300]: Intel Corporation Alder Lake-N [UHD Graphics] [8086:46d0] (prog-if 00 [VGA controller]) lshw -c video *-display NON-RÉCLAMÉ description: VGA compatible controller produit: Alder Lake-N [UHD Graphics] fabriquant: Intel Corporation identifiant matériel: 2 information bus: pci@0000:00:02.0 version: 00 bits: 64 bits horloge: 33MHz fonctionnalités: pciexpress msi pm vga_controller bus_master cap_list configuration: latency=0 ressources: mémoireE/S:600-5ff mémoireE/S:400-3ff mémoire:6000000000-6000ffffff mémoire:4000000000-400fffffff portE/S:5000(taille=64) mémoire:c0000-dffff mémoire:4010000000-4016ffffff mémoire:4020000000-40ffffffff *-graphics produit: EFI VGA identifiant matériel: 1 nom logique: /dev/fb0 fonctionnalités: fb configuration: depth=32 resolution=800,600 Une option du type "i915.force_probe=4c8a" pourrait-elle fonctionner ? Pour la piste 2, Avec deux moniteur IIyama différents, connectés à tour de rôle par HDMI, j'ai: get-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface Looks like no busses have an EDID. Sorry! Attempting to use the classical VBE interface Performing real mode VBE call Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0 Function unsupported Call failed VBE version 0 VBE string at 0x0 "O�" VBE/DDC service about to be called Report DDC capabilities Performing real mode VBE call Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0 Function unsupported Call failed Reading next EDID block VBE/DDC service about to be called Read EDID Performing real mode VBE call Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0 Function unsupported Call failed The EDID data should not be trusted as the VBE call failed Error: output block unchanged I'm sorry nothing was successful. Maybe try some other arguments if you played with them, or send an email to Matthew Kern <pyrophobic...@gmail.com>. Qu'en conclure ? Le jeu. 29 févr. 2024 à 00:07, ajh-valmer <ajh.val...@free.fr> a écrit : > > On Wednesday 28 February 2024 21:29:38 Pierre ESTREm wrote: > > Faut écrire : > > $ xrandr -s 1920x1080 # Notez le 'x' et pas le '*' : > > Pour moi, c'est le pilote vidéo qui n'est plus correctement installé. > Résolvons le problèmes dans le bon ordre. >