jai bien peur de ne pas pouvoir taider mais lilo marche néanmoins tres bien sur mon A7V
je tenvoi mon lilo.conf si ca peut taider mais jen doute boot = /dev/hda map = /boot/map delay = 200 timeout = 500 default = win vga = normal initrd = /initrd.img root = /dev/hda3 read-only lba32 install=/boot/boot-menu.b image = /vmlinuz label = Linux other = /dev/hda1 label = win other = /dev/hda1 label = XP ----- Original Message ----- From: "aronayette" <[EMAIL PROTECTED]> To: "debian" <debian-user-french@lists.debian.org> Sent: Wednesday, September 04, 2002 12:58 PM Subject: "multibooter" avec une Asus A7V > Salut la liste, > > Bon j'ai des problemes avec lilo sur la configue suivante > > hda = win2k > hdb = cdrom > hdc = linux woody (kernel 2.4) > hdd = un graveur > > mon lilo est des plus simple > > lba32 > boot=/dev/hda > > root=/dev/hdc5 > > install=/boot/boot.b > delay=20 > map=/boot/map > vga=normal > #disk=/dev/hdc > # bios=0x80 > default=dos > image=/boot/bzImage > label=lin > read-only > > other=/dev/hda1 > label=dos > table=/dev/hda > > j'ai fait des essais avec bios=0x80, bios=0x81 .... et j'ai l'erreur > suivante au boot : > soit L 01 01 01... > soit L 02 02 02... > > > > Quand je lance lilo (voir lilo -v) je n'ai aucun soucis, aucun warning > > deb2:~# lilo -v > LILO version 22.2, Copyright (C) 1992-1998 Werner Almesberger > Development beyond version 21 Copyright (C) 1999-2001 John Coffman > Released 05-Feb-2002 and compiled at 20:57:26 on Apr 13 2002. > MAX_IMAGES = 27 > > Reading boot sector from /dev/hda > Merging with /boot/boot.b > Boot image: /boot/bzImage > Added lin > > Boot other: /dev/hda1, on /dev/hda, loader /boot/chain.b > Added dos * > > /boot/boot.0300 exists - no backup copy made. > Writing boot sector. > > > A force d'essais, de lecture de doc et groups, j'en suis venu a la > conclusion suivante : mon bios me pose des problemes. > > Quelqu'un aurait-il une configue similaire ou une solution a mon > probleme. Merci > > > Nico > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > >