Bon, le noyau 2.4.18 etant enfin installe correctement (le lilo.conf pointait vers un mauvais fichier de ram), j'ai recommence les operations avec la carte ethernet.
Ca ne marche tj pas... Quelqu'un sait-il comment la faire fonctionner avec un noyau 2.4.18? Merci bcp pour toute aide Fabrice dmesg ne donne tj rien concernant la carte. modprobe sis900 me retourne toujours le message: modprobe sis900 /lib/modules/2.4.18-686/kernel/drivers/net/sis900.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.18-686/kernel/drivers/net/sis900.o: insmod /lib/modules/2.4.18-686/kernel/drivers/net/sis900.o failed /lib/modules/2.4.18-686/kernel/drivers/net/sis900.o: insmod sis900 failed dmesg Linux version 2.4.18-686 ([EMAIL PROTECTED]) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Sun Apr 14 11:32:47 EST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fffc000 (usable) BIOS-e820: 000000000fffc000 - 000000000ffff000 (ACPI data) BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 65532 zone(0): 4096 pages. zone(1): 61436 pages. zone(2): 0 pages. Found and enabled local APIC! Kernel command line: BOOT_IMAGE=Noyau_2.4.18 ro root=306 hdc=ide-scsi ignore=hdc Initializing CPU#0 Detected 2018.002 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 4023.91 BogoMIPS Memory: 253484k/262128k available (811k kernel code, 8256k reserved, 231k data, 212k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 12K, L1 D cache: 8K CPU: L2 cache: 512K CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2018.0983 MHz. ..... host bus clock speed is 100.9048 MHz. cpu: 0, clocks: 1009048, slice: 504524 CPU0<T0:1009040,T1:504512,D:4,S:504524,C:1009048> mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xf11e0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent PCI: Using IRQ router default [1039/0962] at 00:02.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized devfs: v1.10 (20020120) Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x0 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) Linux IP multicast router 0.06 plus PIM-SM RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 2632 blocks [1 disk] into ram disk... done. Freeing initrd memory: 2632k freed VFS: Mounted root (cramfs filesystem). Freeing unused kernel memory: 212k freed NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Journalled Block Device driver loaded Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller on PCI bus 00 dev 15 SIS5513: chipset revision 0 SIS5513: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:pio hda: SAMSUNG SP8004H, ATA DISK drive hdc: PHILIPS CDD6911, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=155127/16/63 Partition check: /dev/ide/host0/bus0/target0/lun0: [PTBL] [9733/255/63] p1 p2 < p5 p6 p7 p8 p9 > ext3: No journal on filesystem on ide0(3,6) Adding Swap: 530104k swap-space (priority -1) Real Time Clock Driver v1.10e SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: PHILIPS Model: CDD6911 Rev: B1.0 Type: CD-ROM ANSI SCSI revision: 02 [drm:drm_init] *ERROR* Cannot initialize the agpgart module. sis900.c: v1.08.02 11/30/2001 eth0: Error EERPOM read ffff lspci -v 00:00.0 Host bridge: Silicon Integrated Systems [SiS]: Unknown device 0646 Subsystem: Asustek Computer, Inc.: Unknown device 8081 Flags: bus master, medium devsel, latency 32 Memory at f4000000 (32-bit, non-prefetchable) [size=64M] Capabilities: [c0] AGP version 2.0 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: f3000000-f3ffffff Prefetchable memory behind bridge: fbf00000-febfffff 00:02.0 ISA bridge: Silicon Integrated Systems [SiS]: Unknown device 0962 (rev 04) Flags: bus master, medium devsel, latency 0 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 8a [Master SecP PriP]) Subsystem: Asustek Computer, Inc.: Unknown device 807a Flags: bus master, medium devsel, latency 128, IRQ 11 I/O ports at <ignored> I/O ports at <ignored> I/O ports at <ignored> I/O ports at <ignored> I/O ports at b400 [size=16] 00:03.0 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 0f) (prog-if 10 [OHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 807a Flags: bus master, medium devsel, latency 32, IRQ 9 Memory at f2000000 (32-bit, non-prefetchable) [size=4K] 00:03.1 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 0f) (prog-if 10 [OHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 807a Flags: bus master, medium devsel, latency 32, IRQ 9 Memory at f1800000 (32-bit, non-prefetchable) [size=4K] 00:03.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 0f) (prog-if 10 [OHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 807a Flags: bus master, medium devsel, latency 32, IRQ 9 Memory at f1000000 (32-bit, non-prefetchable) [size=4K] 00:03.3 USB Controller: Silicon Integrated Systems [SiS]: Unknown device 7002 (prog-if 20) Subsystem: Asustek Computer, Inc.: Unknown device 807a Flags: bus master, medium devsel, latency 32, IRQ 9 Memory at f0800000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] Power Management version 2 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet (rev 91) Subsystem: Asustek Computer, Inc.: Unknown device 80a7 Flags: bus master, medium devsel, latency 32, IRQ 5 I/O ports at 9800 [size=256] Memory at f0000000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at fbec0000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10) Subsystem: Asustek Computer, Inc.: Unknown device 80e2 Flags: bus master, stepping, medium devsel, latency 32, IRQ 10 I/O ports at 9400 [size=256] Capabilities: [c0] Power Management version 2 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G550 AGP (rev 01) (prog-if 00 [VGA]) Subsystem: Matrox Graphics, Inc. Millennium G550 Dual Head DDR 32Mb Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at fc000000 (32-bit, prefetchable) [size=32M] Memory at f3800000 (32-bit, non-prefetchable) [size=16K] Memory at f3000000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at fbfe0000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Capabilities: [f0] AGP version 2.0