Salut Le Lundi 17 Février 2003 08:20, Frédéric Bothamy a écrit :
> > Par contre, je ne saisis pas trop à quoi servent les deux options > > StandbyTime et SuspendTime, et je saisis encore moins la différence > > entre les deux. > > > > Y aurait-il quelqu'un pour éclairer ma lanterne ? :o) > > man XF86Config-4 explique cela pas trop mal. C'est lié à DPMS, la > norme d'économie d'énergie pour les moniteurs. Euh, je trouve au contraire que c'est pour le moins sommaire... Option "StandbyTime" "time" sets the inactivity timeout for the "standby" phase of DPMS mode. time is in minutes, and the value can be changed at run-time with xset(1). Default: 20 minutes. This is only suitable for VESA DPMS compatible monitors, and may not be supported by all video drivers. It is only enabled for screens that have the "DPMS" option set (see the MONITOR section below). Option "SuspendTime" "time" sets the inactivity timeout for the "suspend" phase of DPMS mode. time is in minutes, and the value can be changed at run-time with xset(1). Default: 30 minutes. This is only suitable for VESA DPMS compatible monitors, and may not be supported by all video drivers. It is only enabled for screens that have the "DPMS" option set (see the MONITOR section below). @+ -- Utilisateurs de Linux, enregistrez-vous : http://counter.li.org