On Wed, 16 Apr 2003 16:20:13 +0200 Daniel Déchelotte <[EMAIL PROTECTED]> wrote:
> Pour résumer : ça (ne) marche (qu') en USB storage. Alors je reprends la > suggestion de Romuald : as-tu le support SCSI, nécessaire au support de > l'USB-storage, lui-même bien entendu nécessaire puisque tu veux > l'utiliser ? > C'est ma premiere idee :) Oui j'ai le support SCSI, enfin je le suppose :(. Mon Zip // fonctionne et j'ai /proc/scsi/scsi. Voici ma procedure : - Connecter le HP 120 sur le cable usb, idem pour le pc. - modprobe usb-uhci. - mount /proc/bus/usb - modprobe usb-storage - modprobe scsi_mod Les modules charges : usb-storage 57556 0 (unused) usb-uhci 23436 0 (unused) usbcore 63104 1 [usb-storage usb-uhci] scsi_mod 94740 2 [usb-storage sg sd_mod] Mon /var/log/messages : Apr 16 21:06:17 toshiba kernel: usb.c: new USB bus registered, assigned bus number 1 Apr 16 21:06:17 toshiba kernel: hub.c: USB hub found Apr 16 21:06:17 toshiba kernel: hub.c: 2 ports detected Apr 16 21:06:17 toshiba kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver Apr 16 21:06:47 toshiba kernel: hub.c: new USB device 00:05.2-2, assigned address 2 Apr 16 21:06:47 toshiba kernel: usb.c: USB device 2 (vend/prod 0x3f0/0x6502) is not claimed by any active driver. Apr 16 21:08:04 toshiba kernel: Initializing USB Mass Storage driver... Apr 16 21:08:04 toshiba kernel: usb.c: registered new driver usb-storage Apr 16 21:08:04 toshiba kernel: USB Mass Storage support registered. Apr 16 21:13:47 toshiba kernel: usb.c: USB disconnect on device 00:05.2-2 address 2 Apr 16 21:17:20 toshiba kernel: hub.c: new USB device 00:05.2-2, assigned address 3 Apr 16 21:17:20 toshiba kernel: usb.c: USB device 3 (vend/prod 0x3f0/0x6502) is not claimed by any active driver. Mon /proc/bus/usb : T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=ff80 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=03f0 ProdID=6502 Rev= 1.00 S: Manufacturer=Hewlett-Packard S: Product=hp photosmart 120 series C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=06(still) Sub=01 Prot=01 Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 1 Ivl=1ms mon /proc/scsi/scsi : Attached devices: none Tout semble bien detecte sauf le SCSI ? Que me manquerait-il ? Merci pour vos premieres idees !!!! La suite lol Thierry
