-- Claude Parisot <[EMAIL PROTECTED]> Bon, j'ai posté pour savoir ce que signifiait unary operator expected. Merci pour vos réponses même si c'est encore brumeux. J'ai jeté un coup d'oeil dans /etc/init.d/checkroot.sh
Il me semble qu'il y a des choses incorrectes dedans mais ça dépasse mes compétences. # # Mount /proc. If /proc/1 exists, but /proc is not mounted, # issue a warning so that the user knows something is wrong. # doproc=yes if [ -d /proc/1 ] then rootino=`ls -lid /proc | sed -ne 's/^ *\([0-9]\+\).*$/\1/p'` if [ "$rootino" -gt 2 ] then echo "WARNING: found junk under the /proc mountpoint" else doproc=no fi fi [ "$doproc" = yes ] && mount -n /proc # # Activate the swap device(s) in /etc/fstab. This needs to be done # before fsck, since fsck can be quite memory-hungry. # doswap=no case "`uname -r`" in 2.[0123].*) if [ $swap_on_md = yes ] && grep -qs resync /proc/mdstat then [ "$VERBOSE" != no ] && echo "Not activating swap - RAID array resyncing" else doswap=yes fi ;; *) doswap=yes ;; esac if [ $doswap = yes ] then [ "$VERBOSE" != no ] && echo "Activating swap." swapon -a 2> /dev/null fi # # Check the root file system. # if [ -f /fastboot ] || [ $rootcheck = no ] [C'EST LA FAMEUSE LIGNE 71] then [ $rootcheck = yes ] && echo "Fast boot, no file system check" else # # Ensure that root is quiescent and read-only before fsck'ing. # mount -n -o remount,ro / if [ $? = 0 ] then if [ -f /forcefsck ] then force="-f" else force="" fi if [ "$FSCKFIX" = yes ] then fix="-y" else fix="-a" fi spinner="-C" case "$TERM" in dumb|network|unknown|"") spinner="" ;; esac [ `uname -m` = s390 ] && spinner="" # This should go away echo "Checking root file system..." fsck $spinner $force $fix / # # If there was a failure, drop into single-user mode. # # NOTE: "failure" is defined as exiting with a return code of # 2 or larger. A return code of 1 indicates that file system # errors were corrected but that the boot may proceed. # if [ $? -gt 1 ] then # Surprise! Re-directing from a HERE document (as in # "cat << EOF") won't work, because the root is read-only. PROBLEME OU PAS ??? echo echo "fsck failed. Please repair manually and reboot. Please note" echo "that the root file system is currently mounted read-only. To" echo "remount it read-write:" echo echo " # mount -n -o remount,rw /" echo echo "CONTROL-D will exit from this shell and REBOOT the system." echo # Start a single user shell on the console /sbin/sulogin $CONSOLE reboot -f fi else echo "*** ERROR! Cannot fsck root fs because it is not mounted read-only!" echo fi fi # # If the root filesystem was not marked as read-only in /etc/fstab, # remount the rootfs rw but do not try to change mtab because it # is on a ro fs until the remount succeeded. Then clean up old mtabs # and finally write the new mtab. # mount -n -o remount,$rootmode / if [ "$rootmode" = rw ] then rm -f /etc/mtab~ /etc/nologin : > /etc/mtab mount -f -o remount / mount -f /proc [ "$devfs" ] && grep -q '^devfs /dev' /proc/mounts && mount -f "$devfs" fi : exit 0
# # checkroot.sh Check to root file system. # # Version: @(#)checkroot.sh 2.84-3 25-Jan-2002 [EMAIL PROTECTED] # . /etc/default/rcS # # Set SULOGIN in /etc/default/rcS to yes if you want a sulogin to be spawned # from this script *before anything else* with a timeout, like SCO does. # [ "$SULOGIN" = yes ] && sulogin -t 30 $CONSOLE # # Ensure that bdflush (update) is running before any major I/O is # performed (the following fsck is a good example of such activity :). # [ -x /sbin/update ] && update # # Read /etc/fstab. # exec 9>&0 </etc>&9 9>&- # # Mount /proc. If /proc/1 exists, but /proc is not mounted, # issue a warning so that the user knows something is wrong. # doproc=yes if [ -d /proc/1 ] then rootino=`ls -lid /proc | sed -ne 's/^ *\([0-9]\+\).*$/\1/p'` if [ "$rootino" -gt 2 ] then echo "WARNING: found junk under the /proc mountpoint" else doproc=no fi fi [ "$doproc" = yes ] && mount -n /proc # # Activate the swap device(s) in /etc/fstab. This needs to be done # before fsck, since fsck can be quite memory-hungry. # doswap=no case "`uname -r`" in 2.[0123].*) if [ $swap_on_md = yes ] && grep -qs resync /proc/mdstat then [ "$VERBOSE" != no ] && echo "Not activating swap - RAID array resyncing" else doswap=yes fi ;; *) doswap=yes ;; esac if [ $doswap = yes ] then [ "$VERBOSE" != no ] && echo "Activating swap." swapon -a 2> /dev/null fi # # Check the root file system. # if [ -f /fastboot ] || [ $rootcheck = no ] then [ $rootcheck = yes ] && echo "Fast boot, no file system check" else # # Ensure that root is quiescent and read-only before fsck'ing. # mount -n -o remount,ro / if [ $? = 0 ] then if [ -f /forcefsck ] then force="-f" else force="" fi if [ "$FSCKFIX" = yes ] then fix="-y" else fix="-a" fi spinner="-C" case "$TERM" in dumb|network|unknown|"") spinner="" ;; esac [ `uname -m` = s390 ] && spinner="" # This should go away echo "Checking root file system..." fsck $spinner $force $fix / # # If there was a failure, drop into single-user mode. # # NOTE: "failure" is defined as exiting with a return code of # 2 or larger. A return code of 1 indicates that file system # errors were corrected but that the boot may proceed. # if [ $? -gt 1 ] then # Surprise! Re-directing from a HERE document (as in # "cat << EOF") won't work, because the root is read-only. echo echo "fsck failed. Please repair manually and reboot. Please note" echo "that the root file system is currently mounted read-only. To" echo "remount it read-write:" echo echo " # mount -n -o remount,rw /" echo echo "CONTROL-D will exit from this shell and REBOOT the system." echo # Start a single user shell on the console /sbin/sulogin $CONSOLE reboot -f fi else echo "*** ERROR! Cannot fsck root fs because it is not mounted read-only!" echo fi fi # # If the root filesystem was not marked as read-only in /etc/fstab, # remount the rootfs rw but do not try to change mtab because it # is on a ro fs until the remount succeeded. Then clean up old mtabs # and finally write the new mtab. # mount -n -o remount,$rootmode / if [ "$rootmode" = rw ] then rm -f /etc/mtab~ /etc/nologin : > /etc/mtab mount -f -o remount / mount -f /proc [ "$devfs" ] && grep -q '^devfs /dev' /proc/mounts && mount -f "$devfs" fi : exit 0