Perso je l'ai installé plusieurs fois sans souci. Je tourne avec un noyau 2.4.22.
J'ai recompiler mon noyau pour l'avoir a ma sauce. Puis j'ai fait un petit: apt-get install nvidia-glx nvidia-glx-dev nvidia-kernel Puis suivant les procedures sur le net j'ai installe les modules et reconfigurer mon Xfree Ci joint l'URL du manuel que j'utilise http://dpt.tuxfamily.org/docs/nvidia/nvidia.html Bonne chance Le dim 26/10/2003 à 16:50, Yves NICOLE a écrit : > g le meme probleme avec une Geforce 2 GTS, j'ai essayer d'installer les > pilotes d'a peu près toutes les manières possibles, mais au final > j'obtiens un message du genre, "unresolved symbol" pour le fichier > nvidia.o si je fais un modprobe. > Pour l'instant g laissé tombé car je nutilise pas d'applis accélérées > 3D, mais si qqun a une idée (ou une méthode standard pour installer les > drivers nvidia sur debian) ca m'intéresse également. > P.S. je précise que mon noyau : 2.4.22, et que l'installation avec le > binaire de chez nvidia ne fonctionne pas. > > On Sun, 2003-10-26 at 16:40, LALLOUCHE Emir wrote: > > Bonjour, > > Je tente de configuere on sever x depuis des semaines sur une debian sid > > avec le noyau d'origine woody, avec une mise à jour de xfree. > > J'ai tenté avec vesa, ça ne marche pas (voir fichier vesa.txt) > > J'ai tenté avec les pilotes libres nvidia avec apt-get install > > nvidia-glx et ensuite apt-get install nvidia-* , il a des problémes de > > dépendances, ça marche pas. > > Ensuite avec les pilotes nv, rien non plus (voir fichier nv.txt). > > > > J'ai toujours le message : no screen found > > Je précise que j'ai un écran lcd samsung synMaster 151s. > > > > Quelqu'un a t il réussi ? > > Je pense laisser tomber la debian si je n'y arrive pas d'ici peu ou > > changer de carte graphique. > > > > Merci. > > > > ______________________________________________________________________ > > X: unable to open wrapper config file /etc/X11/Xwrapper.config > > X: warning; process set to priority -1 instead of requested priority 0 > > > > This is a pre-release version of XFree86, and is not supported in any > > way. Bugs may be reported to XFree86@XFree86.Org and patches submitted > > to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, > > please check the latest version in the XFree86 CVS repository > > (http://www.XFree86.Org/cvs) > > > > XFree86 Version 4.2.1.1 (Debian 4.2.1-12.1 20031003005825 [EMAIL > > PROTECTED]) / X Window System > > (protocol Version 11, revision 0, vendor release 6600) > > Release Date: 18 October 2002 > > If the server is older than 6-12 months, or if your card is > > newer than the above date, look for a newer version before > > reporting problems. (See http://www.XFree86.Org/) > > Build Operating System: Linux 2.4.21-rc1-ac1-cryptoloop i686 [ELF] > > Module Loader present > > Markers: (--) probed, (**) from config file, (==) default setting, > > (++) from command line, (!!) notice, (II) informational, > > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > > (==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 26 16:21:13 2003 > > (==) Using config file: "/etc/X11/XF86Config-4" > > Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:debug_xform.o": No > > symbols found > > Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols > > found > > (EE) No devices detected. > > > > Fatal server error: > > no screens found > > > > When reporting a problem related to a server crash, please send > > the full server output, not just the last messages. > > This can be found in the log file "/var/log/XFree86.0.log". > > Please report problems to [EMAIL PROTECTED] > > > > XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0" > > after 0 requests (0 known processed) with 0 events remaining. > > > > ______________________________________________________________________ > > X: unable to open wrapper config file /etc/X11/Xwrapper.config > > X: warning; process set to priority -1 instead of requested priority 0 > > > > This is a pre-release version of XFree86, and is not supported in any > > way. Bugs may be reported to XFree86@XFree86.Org and patches submitted > > to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, > > please check the latest version in the XFree86 CVS repository > > (http://www.XFree86.Org/cvs) > > > > XFree86 Version 4.2.1.1 (Debian 4.2.1-12.1 20031003005825 [EMAIL > > PROTECTED]) / X Window System > > (protocol Version 11, revision 0, vendor release 6600) > > Release Date: 18 October 2002 > > If the server is older than 6-12 months, or if your card is > > newer than the above date, look for a newer version before > > reporting problems. (See http://www.XFree86.Org/) > > Build Operating System: Linux 2.4.21-rc1-ac1-cryptoloop i686 [ELF] > > Module Loader present > > Markers: (--) probed, (**) from config file, (==) default setting, > > (++) from command line, (!!) notice, (II) informational, > > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > > (==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 26 16:23:02 2003 > > (==) Using config file: "/etc/X11/XF86Config-4" > > Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols > > found > > (EE) VESA(0): No matching modes > > (EE) Screen(s) found, but none have a usable configuration. > > > > Fatal server error: > > no screens found > > > > When reporting a problem related to a server crash, please send > > the full server output, not just the last messages. > > This can be found in the log file "/var/log/XFree86.0.log". > > Please report problems to [EMAIL PROTECTED] > > > > XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0" > > after 0 requests (0 known processed) with 0 events remaining. -- Sebastienlayer <[EMAIL PROTECTED]>
signature.asc
Description: Ceci est une partie de message =?ISO-8859-1?Q?num=E9riquement?= =?ISO-8859-1?Q?_sign=E9e=2E?=