Bonjour, je me casse les dents depuis deux jours non-stop pour migrer mon ddns/dhcp hardware (Speedtouch Pro) vers mon serveur local (woody). Pour le dhcp je n'ai eût aucun problème, réglé en 15 mn (RTFM compris), en revanche pour updater bind avec les noms de machines fraîchement authentifiées par dhcpd je suis exténué, ça fait 2 jours que je suis dessus ça ne veut rien savoir. Bind fonctionne, il sert correctement les requêtes DNS du net (forwarders {};), mais ne semble pas accepter les mises à jour de dhcpd, je sais qu'il communiquent entre eux car selon la config de named.conf j'ai un warning de dhcpd différent ("timed out" ou "not authorized"). De son côté bind ne dit rien, il communique bien avec dhcpd mais ne m'informe même pas des requêtes refusées, du coup je ne comprend pas ce qui cloche, j'ai pourtant remplis la section "logging" de named.conf. Rien d'explicite sur le net ne m'a permis de résoudre ce problème, c'est pourquoi je jette ce Thread à la mer.
mammique. ################################################################################ # Message de dhcpd lors d'une requête dhcp : ################################################################################ Mar 24 15:17:43 localhost dhcpd: DHCPRELEASE of 10.0.0.253 from 00:a0:cc:d8:3e:80 via eth0 (found) Mar 24 15:17:43 localhost dhcpd: DHCPDISCOVER from 00:a0:cc:d8:3e:80 via eth0 Mar 24 15:17:44 localhost dhcpd: DHCPOFFER on 10.0.0.253 to 00:a0:cc:d8:3e:80 via eth0 Mar 24 15:17:44 localhost dhcpd: DHCPDISCOVER from 00:a0:cc:d8:3e:80 via eth0 Mar 24 15:17:44 localhost dhcpd: DHCPOFFER on 10.0.0.253 to 00:a0:cc:d8:3e:80 (PlasticBertrand) via eth0 Mar 24 15:17:44 localhost dhcpd: Unable to add forward map from PlasticBertrand.industrie to 10.0.0.253: timed out Mar 24 15:17:44 localhost dhcpd: DHCPREQUEST for 10.0.0.253 (10.0.0.254) from 00:a0:cc:d8:3e:80 (PlasticBertrand) via eth0 Mar 24 15:17:44 localhost dhcpd: DHCPACK on 10.0.0.253 to 00:a0:cc:d8:3e:80 (PlasticBertrand) via eth0 ################################################################################ ################################################################################ # named.conf ################################################################################ // This is the primary configuration file for the BIND DNS server named. // // Please read /usr/share/doc/bind9/README.Debian for information on the // structure of BIND configuration files in Debian, *BEFORE* you customize // this configuration file. // logging { channel update_debug { file "/var/log/named_debug.log"; severity debug 3; print-category yes; print-severity yes; print-time yes; }; channel security_info { file "/var/log/named_info.log"; severity info; print-category yes; print-severity yes; print-time yes; }; category packet { security_info; }; category update { update_debug; }; category security { security_info; }; category default { default_syslog; default_debug; }; }; options { directory "/var/cache/bind"; // If there is a firewall between you and nameservers you want // to talk to, you might need to uncomment the query-source // directive below. Previous versions of BIND always asked // questions using port 53, but BIND 8.1 and later use an unprivileged // port by default. // query-source address * port 53; // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. forwarders { 193.252.19.3; }; auth-nxdomain no; # conform to RFC1035 }; key "rndc-key" { algorithm hmac-md5; secret "XXXXXXXXXXXXXXXXXX"; }; controls { inet 127.0.0.1 port 953 allow { 127.0.0.1; } keys { rndc-key; }; }; view internal { match-clients { 10.0.0.0/24; }; recursion yes; // prime the server with knowledge of the root servers zone "." { type hint; file "/etc/bind/db.root"; }; // be authoritative for the localhost forward and reverse zones, and for // broadcast zones as per RFC 1912 zone "localhost" { type master; file "/etc/bind/db.local"; }; zone "127.in-addr.arpa" { type master; file "/etc/bind/db.127"; }; zone "0.in-addr.arpa" { type master; file "/etc/bind/db.0"; }; zone "255.in-addr.arpa" { type master; file "/etc/bind/db.255"; }; // add entries for other zones below here zone "moulive" { type master; file "/etc/bind/moulive.hosts"; allow-update { key rndc-key; }; }; zone "0.0.10.in-addr.arpa" { type master; file "/etc/bind/moulive.hosts.rev"; allow-update { key rndc-key; }; }; }; ################################################################################ ################################################################################ # rndc.conf ################################################################################ key "rndc-key" { algorithm hmac-md5; secret "XXXXXXXXXXXXXXXXXX"; }; options { default-key "rndc-key"; default-server 127.0.0.1; default-port 953; }; ################################################################################ ################################################################################ # dhcpd.conf ################################################################################ # # Sample configuration file for ISC dhcpd for Debian # # $Id: dhcpd.conf,v 1.4 2002/05/05 21:28:06 peloy Exp $ # # The ddns-updates-style parameter controls whether or not the server will # attempt to do a DNS update when a lease is confirmed. We default to the # behavior of the version 2 packages ('none', since DHCP v2 didn't # have support for DDNS.) key "rndc-key" { algorithm hmac-md5; secret "XXXXXXXXXXXXXXXXXX"; }; ddns-update-style none; # option definitions common to all supported networks... # option domain-name "example.org"; # option domain-name-servers ns1.example.org, ns2.example.org; default-lease-time 600; max-lease-time 7200; ddns-update-style interim; ignore client-updates; ddns-updates on; ddns-domainname "industrie"; ddns-rev-domainname "in-addr.arpa"; authoritative; subnet 10.0.0.0 netmask 255.255.255.0 { option routers 10.0.0.138; option domain-name "industrie"; option domain-name-servers 10.0.0.254; range 10.0.0.0 10.0.0.254; } zone industrie. { primary 127.0.0.1; key rndc-key; } zone 0.0.10.in-addr.arpa. { primary 127.0.0.1; key rndc-key; } ################################################################################ -- mammique <[EMAIL PROTECTED]>