On Thu, 18 Nov 2004 17:19:23 +0100 messmate <[EMAIL PROTECTED]> wrote:
> Voila, je tenais à le signaler, pour tous ceux qui m'ont répondu: > Finalement j'ai téléphoné au service après vente (excellent) avec qui > 'step by step' je suis arrivé à le mettre en route. > L'astuce (si on peut dire) est qu'il faut lors d'une première mise en > route, maintenir le bouton d'allumage pendant 30 secondes enfoncé !!! > Ceci n'était pas signalé dans le manuel. > Cet écran c'est mis en route après cela sans aucune reconfig de > XFREE86 en 1024/768. > Cet écran supporte cependant la 1280/1024 mais > 'sudo dpkg-reconfigure xserver-xfree86' ne veut pas écrire le > fichier sans avertissement. C'est toujours l'ancien qui revient. > On peut m'expliquer pourquoi ? > mess-mate Bonsoir, Voici le début du fichier XF86config-4 : # XF86Config-4 (XFree86 X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using# values from the debconf database. # # Edit this file with caution, and see the XF86Config-4 manual page. # (Type "man XF86Config-4" at the shell prompt.) # # This file is automatically updated on xserver-xfree86 package upgrades *only*# if it has not been modified since the last upgrade of the xserver-xfree86# package. # # If you have edited this file but would like it to be automatically updated# again, run the following commands as root: # # cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom # md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum # dpkg-reconfigure xserver-xfree86 N'aurais tu pas éditer le fichier de conf à la mano ? Si oui, la réponse est plus haut. Cordialement PS : j'ai mis bien longtemps a m'en apercevoir aussi. :-( -- Bruno Magagnini - Besancon L'adulte ne croit pas au père Noël. Il vote - Pierre Desproges