Hallo, ich habe Probleme mit einer 3Com 3c905B Karte und Kernel 2.4.18 (ebenso 2.4.17). Mit dem Woody 2.2.20-Installations-Kernel geht alles klar, aber
Unter dem Woody-Installations-Kernel: ~> modprobe -v 3c59x /sbin/insmod /lib/modules/2.2.20/net/3c59x.o Using /lib/modules/2.2.20/net/3c59x.o Symbol version prefix '' 3c59x.c 18Feb01 Donald Becker and others http://www.scyld.com/network/vortex.html eth0: 3Com 3c905B Cyclone 100baseTx at 0x2c00, 00:50:04:52:8e:a6, IRQ 9 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 786d. Enabling bus-master transmits and whole-frame receives. Unter einem selbstgebackenen 2.4.18, der so auf einem recht ähnlichen Rechner ordentlich läuft: ~> modprobe -v 3c59x /sbin/insmod /lib/modules/2.4.18/kernel/drivers/net/3c59x.o Using /lib/modules/2.4.18/kernel/drivers/net/3c59x.o Symbol version prefix '' PCI: Found IRQ 9 for device 00:10.0 PCI: Sharing IRQ 9 with 00:07.2 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 00:10.0: 3Com PCI 3c905B Cyclone 100baseTx at 0x2c00. Vers LK1.1.16 Im letzteren Fall kann nach einem /etc/init.d/networking start kein erfolgreiches ping abgesetzt werden. Installiert ist: dpkg --status dhcp-client Package: dhcp-client Status: install ok installed Priority: optional Section: net Installed-Size: 365 Maintainer: Eloy A. Paris <[EMAIL PROTECTED]> Source: dhcp Version: 2.0pl5-7 Weiterhin ist: ~> cat /etc/network/interfaces # The loopback interface auto lo iface lo inet loopback # The first network card - this entry was created during the Debian installation auto eth0 iface eth0 inet dhcp Hat jemand eine Idee, warum es bei 2.4.18 Probleme geben könnte? Viele Grüße Andreas. -- Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)