Hallo, konnte an dem Problem bisher nicht weitermachen, hier noch einige Infos, das Problem besteht immer noch und ich komme nicht weiter:
Windows bootet, FreeBSD und Linux auch. Linux bootet nur nicht mit 2.6.{8,9}. Ich frage mich ob das ein Bug im Kernel ist, oder an meiner Partitionstabelle liegt: Der 2.6.6 Kernel erkennt die Platte so: Nov 8 09:04:38 Astor kernel: hda: TOSHIBA MK6021GAS, ATA DISK drive Nov 8 09:04:38 Astor kernel: Using anticipatory io scheduler Nov 8 09:04:38 Astor kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Nov 8 09:04:38 Astor kernel: hdc: MATSHITADVD-RAM UJ-815A, ATAPI CD/DVD-ROM drive Nov 8 09:04:38 Astor kernel: ide1 at 0x170-0x177,0x376 on irq 15 Nov 8 09:04:38 Astor kernel: hda: max request size: 128KiB Nov 8 09:04:38 Astor kernel: hda: 117210240 sectors (60011 MB), CHS=65535/16/63, UDMA(100) Nov 8 09:04:38 Astor kernel: hda: hda1 hda2 < hda5 hda6 hda7 hda8 > hda3 hda4 Nov 8 09:04:38 Astor kernel: hda3: <bsd: hda9 hda10 hda11 hda12 hda13 > Das Layout ist zugegebenermaßen etwas umständlich, funktionierte aber bislang: hda1 - Windoof hda2 - Extended mit hda5 Linux root hda6 Linux swap hda7 Linux /home hda8 Linux /export hda3 - FreeBSD hda4 - Linux Arcade: Ein kleines Linux, dass der Hersteller an diese stelle gepackt hat um Multimedia Features der Hardware zu bedienen. Die physikalische Partitionierung der Linux Seite habe ich mit Knoppix/ fdisk gemacht, dann Windoof, Linux und FreeBSD installiert. Nach den derzeitigen Problemen habe ich auch schon einen kompletten newfs auf hda5 gemacht, ohne Erfolg. Fdisk meldet # fdisk -lu /dev/hda Disk /dev/hda: 60.0 GB, 60011642880 bytes 255 heads, 63 sectors/track, 7296 cylinders, total 117210240 sectors Units = sectors of 1 * 512 = 512 bytes Device Boot Start End Blocks Id System /dev/hda1 * 63 29318624 14659281 c W95 FAT32 (LBA) /dev/hda2 29318625 78156224 24418800 f W95 Ext'd (LBA) /dev/hda3 78156225 117017459 19430617+ a5 FreeBSD /dev/hda4 117017460 117210239 96390 83 Linux /dev/hda5 29318688 48869729 9775521 83 Linux /dev/hda6 48869793 50845724 987966 82 Linux swap /dev/hda7 50845788 62573174 5863693+ 83 Linux /dev/hda8 62573238 78156224 7791493+ 83 Linux Hier machen mich die Differenzen zwischen End/ Start stutzig, die sind in der fdisk -l Ausgabe nicht zu sehen. Hier nochmal die ausführliche Version von sfdisk: # sfdisk -V -l -x /dev/hda Disk /dev/hda: 116280 cylinders, 16 heads, 63 sectors/track Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. Warning: The partition table looks like it was made for C/H/S=*/255/63 (instead of 116280/16/63). For this listing I'll assume that geometry. Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System /dev/hda1 * 0+ 1824 1825- 14659281 c W95 FAT32 (LBA) /dev/hda2 1825 4864 3040 24418800 f W95 Ext'd (LBA) /dev/hda3 4865 7283 2419 19430617+ a5 FreeBSD start: (c,h,s) expected (1023,254,63) found (1023,255,63) /dev/hda4 7284 7295 12 96390 83 Linux start: (c,h,s) expected (1023,254,63) found (1023,255,63) /dev/hda5 1825+ 3041 1217- 9775521 83 Linux - 3042 3164 123 987997+ 5 Extended - 1825 1824 0 0 0 Empty - 1825 1824 0 0 0 Empty /dev/hda6 3042+ 3164 123- 987966 82 Linux swap - 3165 3894 730 5863725 5 Extended - 3042 3041 0 0 0 Empty - 3042 3041 0 0 0 Empty /dev/hda7 3165+ 3894 730- 5863693+ 83 Linux - 3895 4864 970 7791525 5 Extended - 3165 3164 0 0 0 Empty - 3165 3164 0 0 0 Empty /dev/hda8 3895+ 4864 970- 7791493+ 83 Linux - 3895 3894 0 0 0 Empty - 3895 3894 0 0 0 Empty - 3895 3894 0 0 0 Empty /dev/hda9 4865 5778- 914- 7340032 /dev/hda10 5778+ 5909- 131- 1048576 /dev/hda11 5909+ 6039- 131- 1048576 /dev/hda12 6039+ 6651- 612- 4915200 /dev/hda13 6651+ 7283 633- 5078233+ Warning: partitions 3 and 9 overlap Die Korrekte Adressierung der Platte ist wohl CHS=(7296,255, 63), hdparm gibt die Platte aus als # hdparm -I /dev/hda /dev/hda: ATA device, with non-removable media Model Number: TOSHIBA MK6021GAS Serial Number: 83C72799S Firmware Revision: GA024A Standards: Supported: 5 4 3 2 Likely used: 6 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 117210240 device size with M = 1024*1024: 57231 MBytes device size with M = 1000*1000: 60011 MBytes (60 GB) Capabilities: LBA, IORDY(can be disabled) bytes avail on r/w long: 46 Queue depth: 1 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Advanced power management level: unknown setting (0x0080) DMA: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: [...] Wie kann ich die oben angegebenen Fehler mit H=254 statt H=255 korrigieren? Von verschiedener Seite wurde ich auf http://lwn.net/Articles/86835/ aufmerksam gemacht. Ganz bin ich davon nicht überzeugt, weil alle OS-Systeme gebootet werden können (BTW Ich verwende lilo), insbesondere funktioniert der oben angegebene Fix nicht # sfdisk -d /dev/hda | sfdisk --no-reread -H255 /dev/hda Warning: HDIO_GETGEO says that there are 16 heads Disk /dev/hda: 116280 cylinders, 255 heads, 63 sectors/track Old situation: Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System /dev/hda1 * 0+ 1824 1825- 14659281 c W95 FAT32 (LBA) /dev/hda2 1825 4864 3040 24418800 f W95 Ext'd (LBA) /dev/hda3 4865 7283 2419 19430617+ a5 FreeBSD start: (c,h,s) expected (1023,254,63) found (1023,255,63) /dev/hda4 7284 7295 12 96390 83 Linux start: (c,h,s) expected (1023,254,63) found (1023,255,63) /dev/hda5 1825+ 3041 1217- 9775521 83 Linux /dev/hda6 3042+ 3164 123- 987966 82 Linux swap /dev/hda7 3165+ 3894 730- 5863693+ 83 Linux /dev/hda8 3895+ 4864 970- 7791493+ 83 Linux /dev/hda9 4865 5778- 914- 7340032 /dev/hda10 5778+ 5909- 131- 1048576 /dev/hda11 5909+ 6039- 131- 1048576 /dev/hda12 6039+ 6651- 612- 4915200 /dev/hda13 6651+ 7283 633- 5078233+ sfdisk: unrecognized input: extended partition does not start at a cylinder boundary. Noch immer etwas ratlos -- Peter -- [EMAIL PROTECTED] ConSol* Software GmbH Phone +49 89 45841-100 Consulting & Solutions Mobile +49 177 6040121 Franziskanerstr. 38 http://www.consol.de D-81669 München -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)