Am Fr, den 26.11.2004 schrieb Gernot Galli um 18:55: > Hier noch die Ausgabe von lspci und dmseg | grep eth > lspci gibt folgendes aus > > 00:09.0 Ethernet controller: VIA Technologies, Inc.: Unknown device 3106 > (rev 8b) > Subsystem: VIA Technologies, Inc.: Unknown device 0105 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepp > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- > Latency: 32 (750ns min, 2000ns max), cache line size 08 > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at e400 [size=256] > Region 1: Memory at dea00000 (32-bit, non-prefetchable) > [size=256] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1 > +,D2+,D3hot+ > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL-8029(AS) > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepp > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- > Interrupt: pin A routed to IRQ 12 > Region 0: I/O ports at e800 [size=32] > > 00:11.0 Ethernet controller: VIA Technologies, Inc.: Unknown device 3106 > (rev 8b) > Subsystem: VIA Technologies, Inc.: Unknown device 0105 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepp > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- > Latency: 32 (750ns min, 2000ns max), cache line size 08 > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at ec00 [size=256] > Region 1: Memory at dea01000 (32-bit, non-prefetchable) > [size=256] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1 > +,D2+,D3hot+ > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > dmseg | grep eth: > > eth0: RealTek RTL-8029 found at 0xe800, IRQ 12, 00:E0:7D:77:26:5E. > eth1: VIA VT6105 Rhine-III at 0xdea00000, 00:40:f4:b1:59:37, IRQ 11. > eth1: MII PHY found at address 1, status 0x7869 advertising 05e1 Link > 41e1. > eth2: VIA VT6105 Rhine-III at 0xdea01000, 00:40:f4:b1:4a:93, IRQ 11. > eth2: MII PHY found at address 1, status 0x7869 advertising 05e1 Link [...] Gernot, beide VIA-Karten nutzen IRQ11. Das kann, muss aber nicht, ein Problem sein. (Empfehlung: Evtl. Steckpl. aendern, BIOS Einstellung/Systemkonfiguration anpassen) dmesg lieferte Dir die Zugehörigkeit der Mac-Adresse zur jeweiligen Karte wie z.B. eth1 hat MAC Adresse 00:40:f4:b1:59:37 Welche MAC Adresse mit welcher IP-Adresse korresponiert kannst Du Ueberpruefen mit arp arp 192.168.10.1 sollte liefern: 00:40:f4:b1:59:37 arp 192.168.20.1 sollte liefern: 00:40:f4:b1:4a:93
Schoene Gruesse aus der Lueneburger Heide Werner -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)