Am Mittwoch, 16. Februar 2005 10:01 schrieb Manfred Sampl: > Hallo, > > ich versuche gerade die Festplatte in meinem Heimrouter mit einer CF > Speicherkarte zu ersetzen. Dazu verwende ich einen IDE-CF Adapter den > man direkt auf das Motherboard stecken kann. [...] > > Jetzt habe ich ganz einfach die Daten von der Originalplatte mit rsync > auf die CF Karte kopiert und chroot / lilo gemacht. > > lilo.conf: > > # Support LBA for large hard disks. > lba32 > # Specifies the boot device. This is where Lilo installs its boot > boot=/dev/hdc ^^^^^^^^^^^^^ (s.u.)
> # Specifies the device that should be mounted as root. (`/') > root=/dev/hda1 > > install=/boot/boot-menu.b > > # Specifies the location of the map file > map=/boot/map > # Specifies the number of deciseconds (0.1 seconds) LILO should > delay=20 > # Specifies the VGA text mode at boot time. > vga=normal > # Kernel command line options that apply to all installed images go > append="apm=off acpi=force" > > # Boot up Linux by default. > default=Linux > > image=/vmlinuz > label=Linux > read-only > > Lilo wird ohne Fehler installiert, wenn ich aber nun den CF-Adapter mit > der Karte auf IDE Kanal 1 umstecke, kommt es beim booten zum Fall dass > Lilo wiederholt 80 80 80 80 80 80 80 80 usw schreibt und hängen bleibt. Hab mal das gleiche Problem gehabt (hab aber HD->HD kopiert). Gelöst hab ich es, indem ich auf der neuen Platte die lilo.conf für das endgültige System konfiguriert habe (boot=/dev/hda, s.o.) und sie auf primary/master (hda) konfiguriert hab. Anschließend hab ich mit der Woody-CD und (IIRC) "bf24 root=/dev/hda1" oder "rescbf24 root=/dev/hda1" gebootet (war damals natürlich eine Woody-System). Dann ist das System mit dem CD-Kernel von meiner Root-Partition gelaufen. Ein anschließender "lilo"-Aufruf hat mir den bootloader richtig installiert. HTH, Tobias PS: Wenns funktioniert, schreib doch bitte eine kurze Erfolgsmeldung. Interessiere mich auch für solch eine Konstruktion! > > Nun habe ich nicht wirklich herausfinden können was den Fehler bewirkt, > außer dass es ein Timing Problem am IDE Interface das Probelm sein > könnte. Ist in der lilo.conf etwas falsch? > > Auf der CF-Karte ist ein ext2 Filesystem, Kernel 2.4.27 > > lG Manfred -- Diese Email-Adresse dient nur als Spam-Ziel. Nachrichten an diese Adresse werden nicht gelesen! This email address is a spam-tarpit. Mails sent to this address are not read!