Am Samstag, 13. Juli 2002 19:28 schrieb Elias Gerber:
> hallo
>
> ich krieg unter woody XFree86 Version 4.1.0.1 einfach nicht zum laufen.
> nach 'startx' erscheint auf dem bilschirm für knapp eine sekunde das bild,
> danach aber gleich wieder die konsole. fehler werden auch keine ausgegeben
Ich kenne mich mit der Matrox g400 nicht gerade so gut aus
Aber den Logfiles nach zu urteilen eine ziemlich fehlerhafte Konfig.
Am besten versuchst du es nochmal mit
dpkg-reconfigure xserver-xfree86
Stelle aber bitte sicher ...
>[drm] failed to load kernel module "mga"
Hast du das entsprechende Kernel-Module geladen ???
>(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
> Entry deleted from font path.
>(WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
> Entry deleted from font path.
>(WW) The directory "/usr/lib/X11/fonts/Type1" does not exist.
> Entry deleted from font path.
>(WW) The directory "/usr/lib/X11/fonts/Speedo" does not exist.
> Entry deleted from font path.
>(WW) The directory "/usr/lib/X11/fonts/75dpi" does not exist.
> Entry deleted from font path.
Sind diese Schriften auf deinem System installiert ?
> (==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
> (==) MGA(0): Min pixel clock is 12 MHz
> (==) MGA(0): Max pixel clock is 360 MHz
> (II) MGA(0): AST Vision 5L: Using hsync range of 30.00-60.00 kHz
> (II) MGA(0): AST Vision 5L: Using vrefresh range of 50.00-90.00 Hz
> (II) MGA(0): Clock range: 12.00 to 360.00 MHz
> (II) MGA(0): Not using default mode "1024x768" (hsync out of range)
> (II) MGA(0): Not using default mode "1152x864" (hsync out of range)
> (II) MGA(0): Not using default mode "1280x960" (hsync out of range)
> (II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
> (II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
> (II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
> (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
> (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
> (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
> (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
> (II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
> (II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
> (II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
> (II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
> (II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
> (II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
> (II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
> (II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
> (II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
> (II) MGA(0): Not using mode "1280x1024" (no mode of this name)
> (--) MGA(0): Virtual size is 1024x768 (pitch 1024)
> (**) MGA(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
> (II) MGA(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772
> 800 +hsync +vsync
> (**) MGA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
> (II) MGA(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631
> +hsync +vsync
> (**) MGA(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
> (II) MGA(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509
Ist AST Vision 5L dein Monitor ???
> (II) Keyboard "Generic Keyboard" handled by legacy driver
> (**) Option "Protocol" "PS/2"
> (**) Configured Mouse: Protocol: "PS/2"
> (**) Configured Mouse: Core Pointer
> (**) Option "Device" "/dev/psaux"
> (==) Configured Mouse: Buttons: 3
> (**) Option "Protocol" "ImPS/2"
> (**) Generic Mouse: Protocol: "ImPS/2"
> (**) Generic Mouse: always reports core events
> (**) Option "Device" "/dev/input/mice"
> (EE) xf86OpenSerial: Cannot open device /dev/input/mice
> No such device.
Hast du zwei Mäuse angeschlossen ?
Viel Spaß beim ausprobieren
gruß Holger
-------------------------------------------------------
--
Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED]
mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)