Am 17.08.05 schrieb Markus Plessing <[EMAIL PROTECTED]>:
Das
heißt im Klartext, dass man nach einem Reboot bzw. Neustart jedesmal
alsactl. bemühen muss oder lässt sich dass Ganze auch automatisieren
(in welcher Datei)?Sascha Brechenmacher schrieb:
> Das selbe Problem hab ich auch. Wenn ich dann aber alsaconf
> ausführe funktioniert es wieder. Bis ich reboote dann gibts schon
> wieder keinen Sound.
>
> Ich hab geschaut ob alsaconf irgendwelche Module/Dienste entläd oder
> dazuläd, ist aber nicht der Fall. Vor und nach alsaconf laufen die selben
> Dienste/Module.
>
> Über einen Tip wäre ich auch dankbar.
Ich hab hier grade keinen Rechner mit Sound und kann das nicht testen,
aber sie dir mal alsactl (Paket alsa-utils) an:
[EMAIL PROTECTED]: alsactl --help
Usage: alsactl <options> command
Available options:
-h,--help this help
-f,--file # configuration file
(default /var/lib/alsa/asound.state or /etc/asound.state)
-F,--force try to restore the matching controls as much as possible
-d,--debug debug mode
-v,--version print version of this program
Available commands:
store <card #> save current driver setup for one or each soundcards
to configuration file
restore<card #> load current driver setup for one or each soundcards
from configuration file
power [card #] [state] get/set power state for one or each soundcards
Also sollte für dich folgendes funktionieren ...
* Wenn die Karte funktioniert:
alsactl store
* und um das ganze wieder zu laden:
alsactl restore
Vielen Dank
Thomas