Also sprach Stephan Maseizik <[EMAIL PROTECTED]> (Sat, 15 Oct 2005 22:39:58 +0200): > > Danke für die Erklärungen! > > Richard Mittendorfer <[EMAIL PROTECTED]> schrieb: > > Schade. Waere ide_generic als Modul in der initrd, koenntest du's mal > > umbennen um zu verhindern, dass es geladen wird. AFAIK gibt's aber die > > Moeglichkeit dem IDE0 den Treiber mit einem Kernel Parameter > > mitzugeben. Mal sehen.. > > > > /usr/src/linux-2.6.13/Documentation/ide.txt > > --------------8<------------------ > > The following are valid ONLY on ide0, which usually corresponds > > to the first ATA interface found on the particular host, and the > > defaults for the base,ctl ports must not be altered. > > > > "ide0=dtc2278" : probe/support DTC2278 interface > > "ide0=ht6560b" : probe/support HT6560B interface > > "ide0=cmd640_vlb" : *REQUIRED* for VLB cards with the CMD640 chip > > (not for PCI -- automatically detected) > > "ide0=qd65xx" : probe/support qd65xx interface > > "ide0=ali14xx" : probe/support ali14xx chipsets (ALI > > M1439/M1443/M1445) "ide0=umc8672" : probe/support umc8672 > > chipsets > > > > "ide=doubler" : probe/support IDE doublers on Amiga > > > > There may be more options than shown -- use the source, Luke! > > ---------------8<------------------- > > > > Versuchs also mit einer lilo/grab Commandline ala "linux ide0=via82cxxx" > > Soll ich in die Datei menu.lst von grub "linux ide0=via82cxxx" > eintragen? An welcher Stelle? Habe in der man-page und unter > /usr/share/doc/grub-doc/html/grub.html nichts gefunden das mir Klarheit > verschafft.
Ich hab hier keinen grub je installiert (lilo), kann dir also zu grub nix erzaehlen. IIRC kannst du dem auch beim Boot mal probehalber was beibringen (schift/ctrl/..???). 7 Sekunden google... title <blablabla> kernel (hd0,4)/vmlinuz-2.6.8 root=/dev/hda6 <andere parameter> ide0=via82cxxx initrd (hd0,4/initrd.img-2.6.8 ..so aehnlich sollt's wohl ausschauen.. > Stephan sl ritch