Am Samstag, 8. April 2006 19:29 schrieb Andreas Pakulat: > Wer startet den denn? Hast du irgendwelche Gnome-Programme die > automatisch beim Einloggen gestartet werden, z.B. nautilus?
Weiß ich nicht. Habe den Prozeß mit kill beendet. > > KDE unter Sarge kann nicht automatisch mounten, dafuer braucht man dort > z.B. usbmount. Da kannst du die mount-Optionen auch angeben. > > Das ist gut, ich hatte nur im Syslog was von FAT gesehen (hatte nur kurz > druebergeschaut). Ext3 unterstuetzt sync vernuenftig. > > Andreas Ich habe es nun so gemacht: pmount /dev/sda2 usbdisk Danach als root mein backup-script ausgeführt. Dann: pumount /dev/sda2 Ich hoffe nun, dass alles so in Ordnung ist und ich mich auf die Konsistenz der Daten auf der USB-Platte verlassen kann? Apr 8 20:46:22 sarge kernel: usb 5-1: new high speed USB device using address 2 Apr 8 20:46:22 sarge kernel: Initializing USB Mass Storage driver... Apr 8 20:46:22 sarge kernel: scsi0 : SCSI emulation for USB Mass Storage devices Apr 8 20:46:22 sarge hald[3661]: Timed out waiting for hotplug event 312. Rebasing to 313 Apr 8 20:46:22 sarge kernel: Vendor: SAMSUNG Model: SP1604N Rev: 0000 Apr 8 20:46:22 sarge kernel: Type: Direct-Access ANSI SCSI revision: 02 Apr 8 20:46:22 sarge usb.agent[4771]: usb-storage: loaded successfully Apr 8 20:46:22 sarge kernel: USB Mass Storage device found at 2 Apr 8 20:46:22 sarge kernel: usbcore: registered new driver usb-storage Apr 8 20:46:22 sarge kernel: USB Mass Storage support registered. Apr 8 20:46:22 sarge kernel: SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) Apr 8 20:46:22 sarge kernel: sda: assuming drive cache: write through Apr 8 20:46:23 sarge scsi.agent[4846]: sd_mod: loaded sucessfully (for disk) Apr 8 20:46:23 sarge kernel: /dev/scsi/host0/bus0/target0/lun0: p1 p2 Apr 8 20:46:23 sarge kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Apr 8 20:46:23 sarge udev[4864]: configured rule in '/etc/udev/rules.d/z_hal-plugdev.rules[2]' applied, 'sda' becomes '%k' Apr 8 20:46:23 sarge udev[4864]: creating device node '/dev/sda' Apr 8 20:46:23 sarge udev[4908]: configured rule in '/etc/udev/rules.d/z_hal-plugdev.rules[2]' applied, 'sda2' becomes '%k' Apr 8 20:46:23 sarge udev[4908]: creating device node '/dev/sda2' Apr 8 20:46:23 sarge udev[4907]: configured rule in '/etc/udev/rules.d/z_hal-plugdev.rules[2]' applied, 'sda1' becomes '%k' Apr 8 20:46:23 sarge udev[4907]: creating device node '/dev/sda1' Apr 8 20:47:12 sarge kernel: udf: registering filesystem Apr 8 20:47:12 sarge kernel: UDF-fs: No partition found (1) Apr 8 20:47:12 sarge kernel: Unable to identify CD-ROM format. Apr 8 20:47:12 sarge kernel: FAT: bogus number of reserved sectors Apr 8 20:47:12 sarge kernel: VFS: Can't find a valid FAT filesystem on dev sda2. Apr 8 20:47:12 sarge kernel: NTFS driver 2.1.15 [Flags: R/O MODULE]. Apr 8 20:47:12 sarge kernel: NTFS-fs error (device sda2): read_ntfs_boot_sector(): Primary boot sector is invalid. Apr 8 20:47:12 sarge kernel: NTFS-fs error (device sda2): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover. Apr 8 20:47:12 sarge kernel: NTFS-fs error (device sda2): ntfs_fill_super(): Not an NTFS volume. Apr 8 20:47:12 sarge kernel: HFS+-fs: unable to find HFS+ superblock Apr 8 20:47:12 sarge kernel: VFS: Can't find a HFS filesystem on dev sda2. Apr 8 20:47:12 sarge kernel: kjournald starting. Commit interval 5 seconds Apr 8 20:47:12 sarge kernel: EXT3 FS on sda2, internal journal Apr 8 20:47:12 sarge kernel: EXT3-fs: mounted filesystem with ordered data mode. Apr 8 20:52:28 sarge kernel: usb 5-1: USB disconnect, address 2 Apr 8 20:52:28 sarge udev[5024]: removing device node '/dev/sda1' Apr 8 20:52:28 sarge udev[5016]: removing device node '/dev/sda2' Apr 8 20:52:28 sarge udev[5092]: removing device node '/dev/sda' Nun verstehe ich die "VFS"-Meldungen nicht. Habe grade nochmal geschaut: [EMAIL PROTECTED]:~$ ps aux|grep gnom mld 4740 0.0 0.7 16692 4052 ? S 20:46 0:00 /usr/lib/gnome-vfs2/gnome-vfs-daemon --oaf-activate-iid=OAFIID:GNOME_VFS_Daemon_Factory --oaf-ior-fd=25 Kennt das jemand? Gruß Michael