Hallo, ich versuche, meine PCMCIA-WLAN Karte "Compaq WL110" auch unter dem 2.6.15er Kernel zu nutzen. Bisher lief das so ab (syslog):
Mit 2.6.8-1-686 > Apr 23 18:54:15 localhost cardmgr[1005]: watching 2 sockets > Apr 23 18:54:15 localhost kernel: cs: IO port probe 0x0100-0x04ff: excluding > 0x378-0x37f > Apr 23 18:54:15 localhost kernel: cs: IO port probe 0x0800-0x08ff: clean. > Apr 23 18:54:15 localhost kernel: cs: IO port probe 0x0c00-0x0cff: clean. > Apr 23 18:54:15 localhost kernel: cs: IO port probe 0x0a00-0x0aff: clean. > Apr 23 18:54:15 localhost cardmgr[1006]: starting, version is 3.2.5 > Apr 23 18:54:15 localhost kernel: cs: memory probe 0xa0000000-0xa0ffffff: > clean. > Apr 23 18:54:15 localhost cardmgr[1006]: socket 0: Intersil PRISM2 11 Mbps > Wireless Adapter > Apr 23 18:54:15 localhost cardmgr[1006]: executing: 'modprobe orinoco_cs' > Apr 23 18:54:15 localhost kernel: orinoco.c 0.13e (David Gibson <[EMAIL > PROTECTED]> and others) > Apr 23 18:54:15 localhost kernel: orinoco_cs.c 0.13e (David Gibson <[EMAIL > PROTECTED]> and others) > Apr 23 18:54:15 localhost kernel: eth1: Station identity 001f:0001:0008:000a > Apr 23 18:54:15 localhost kernel: eth1: Looks like a Lucent/Agere firmware > version 8.10 > Apr 23 18:54:15 localhost kernel: eth1: Ad-hoc demo mode supported > Apr 23 18:54:15 localhost kernel: eth1: IEEE standard IBSS ad-hoc mode > supported > Apr 23 18:54:15 localhost kernel: eth1: WEP supported, 104-bit key > Apr 23 18:54:15 localhost kernel: eth1: MAC address 00:02:A5:2D:80:4B > Apr 23 18:54:15 localhost kernel: eth1: Station name "HERMES I" > Apr 23 18:54:15 localhost kernel: eth1: ready > Apr 23 18:54:15 localhost kernel: eth1: index 0x01: Vcc 5.0, irq 3, io > 0x0100-0x013f > Apr 23 18:54:15 localhost cardmgr[1006]: executing: './network start eth1' Mit Kernel 2.6.15-1-686 stellt sich das ganze aber so dar. > Apr 23 17:01:47 localhost cardmgr[3598]: watching 2 sockets > Apr 23 17:01:47 localhost kernel: cs: IO port probe 0x100-0x4ff: excluding > 0x4d0-0x4d7 > Apr 23 17:01:47 localhost kernel: cs: IO port probe 0x100-0x4ff: excluding > 0x4d0-0x4d7 > Apr 23 17:01:47 localhost kernel: cs: IO port probe 0x800-0x8ff: clean. > Apr 23 17:01:47 localhost kernel: cs: IO port probe 0x800-0x8ff: clean. > Apr 23 17:01:47 localhost kernel: cs: IO port probe 0xc00-0xcff: clean. > Apr 23 17:01:47 localhost kernel: cs: IO port probe 0xc00-0xcff: clean. > Apr 23 17:01:47 localhost kernel: cs: IO port probe 0xa00-0xaff: clean. > Apr 23 17:01:47 localhost kernel: cs: IO port probe 0xa00-0xaff: clean. > Apr 23 17:01:47 localhost cardmgr[3609]: starting, version is 3.2.5 > Apr 23 17:01:47 localhost cardmgr[3609]: socket 0: Intersil PRISM2 11 Mbps > Wireless Adapter > Apr 23 17:01:47 localhost kernel: prism2_hw_init: initialized in 132 ms > Apr 23 17:01:47 localhost kernel: wifi0: NIC: id=0x01 v4.2.1 > Apr 23 17:01:47 localhost kernel: wifi0: PRI: id=0x15 v4.4.1 > Apr 23 17:01:47 localhost kernel: wifi0: STA: id=0x1f v8.10.1 > Apr 23 17:01:47 localhost kernel: wifi0: CMD=0x0121 => res=0x7f, resp0=0x0004 > Apr 23 17:01:47 localhost kernel: wifi0: hfa384x_set_rid: > CMDCODE_ACCESS_WRITE failed (res=127, rid=fc33, len=2) > Apr 23 17:01:47 localhost kernel: wifi0: Beacon interval setting to 100 failed > Apr 23 17:01:47 localhost kernel: wifi0: CMD=0x0121 => res=0x7f, resp0=0x0004 > Apr 23 17:01:47 localhost kernel: wifi0: hfa384x_set_rid: > CMDCODE_ACCESS_WRITE failed (res=127, rid=fc10, len=2) > Apr 23 17:01:47 localhost kernel: wifi0: DTIM period setting to 1 failed > Apr 23 17:01:47 localhost kernel: wifi0: CMD=0x0121 => res=0x7f, resp0=0x0004 > Apr 23 17:01:47 localhost kernel: wifi0: hfa384x_set_rid: > CMDCODE_ACCESS_WRITE failed (res=127, rid=fcb4, len=2) > Apr 23 17:01:47 localhost kernel: wifi0: cnfSupportedRates setting to 15 > failed > Apr 23 17:01:47 localhost kernel: wifi0: CMD=0x0121 => res=0x7f, resp0=0x0004 > Apr 23 17:01:47 localhost kernel: wifi0: hfa384x_set_rid: > CMDCODE_ACCESS_WRITE failed (res=127, rid=fcb3, len=2) > Apr 23 17:01:47 localhost kernel: wifi0: cnfBasicRates setting to 3 failed > Apr 23 17:01:47 localhost kernel: wifi0: CMD=0x0121 => res=0x7f, resp0=0x0004 > Apr 23 17:01:47 localhost kernel: wifi0: hfa384x_set_rid: > CMDCODE_ACCESS_WRITE failed (res=127, rid=fc2d, len=2) > Apr 23 17:01:47 localhost kernel: wifi0: could not set host roaming > Apr 23 17:01:47 localhost kernel: wifi0: CMD=0x0121 => res=0x7f, resp0=0x0004 > Apr 23 17:01:47 localhost kernel: wifi0: hfa384x_set_rid: > CMDCODE_ACCESS_WRITE failed (res=127, rid=fc43, len=2) > Apr 23 17:01:47 localhost kernel: wifi0: cnfEnhSecurity setting to 0x0 failed > Apr 23 17:01:47 localhost kernel: wifi0: CMD=0x0121 => res=0x7f, resp0=0x0004 > Apr 23 17:01:47 localhost kernel: wifi0: hfa384x_set_rid: > CMDCODE_ACCESS_WRITE failed (res=127, rid=fc42, len=2) > Apr 23 17:01:47 localhost kernel: wifi0: cnfThirty2Tally setting failed > Apr 23 17:01:47 localhost kernel: wifi0: CMD=0x0121 => res=0x7f, resp0=0x0004 > Apr 23 17:01:47 localhost kernel: wifi0: hfa384x_set_rid: > CMDCODE_ACCESS_WRITE failed (res=127, rid=fc2a, len=2) > Apr 23 17:01:47 localhost kernel: wifi0: cnfAuthentication setting to 0x3 > failed > Apr 23 17:01:47 localhost kernel: wifi0: CMD=0x0121 => res=0x7f, resp0=0x0004 > Apr 23 17:01:47 localhost kernel: wifi0: hfa384x_set_rid: > CMDCODE_ACCESS_WRITE failed (res=127, rid=fc82, len=2) > Apr 23 17:01:47 localhost kernel: wifi0: setting FragmentationThreshold to > 2346 failed > Apr 23 17:01:47 localhost kernel: wifi0: registered netdevice wlan0 > Apr 23 17:01:47 localhost cardmgr[3609]: executing: 'modprobe orinoco_cs' > Apr 23 17:01:47 localhost kernel: orinoco 0.15rc2 (David Gibson <[EMAIL > PROTECTED]>, Pavel Roskin <[EMAIL PROTECTED]>, et al) > Apr 23 17:01:48 localhost kernel: orinoco_cs 0.15rc2 (David Gibson <[EMAIL > PROTECTED]>, Pavel Roskin <[EMAIL PROTECTED]>, et al) > Apr 23 17:01:48 localhost kernel: hostap_cs: setting Vcc=33 (constant) > Apr 23 17:01:48 localhost kernel: hostap_cs: CS_EVENT_CARD_INSERTION > Apr 23 17:01:48 localhost kernel: hostap_cs: setting Vcc=2 (from config) > Apr 23 17:01:48 localhost kernel: Checking CFTABLE_ENTRY 0x01 (default 0x01) > Apr 23 17:01:48 localhost kernel: IO window settings: cfg->io.nwin=1 > dflt.io.nwin=1 > Apr 23 17:01:48 localhost kernel: io->flags = 0x0046, io.base=0x0000, len=64 > Apr 23 17:01:48 localhost kernel: CardServices(RequestIO) returned 29 > Apr 23 17:01:48 localhost kernel: 0.1: RequestIO: Configuration locked > Apr 23 17:01:48 localhost kernel: 0.1: GetNextTuple: No more items > Apr 23 17:01:48 localhost kernel: prism2_config() failed > Apr 23 17:01:48 localhost cardmgr[3609]: executing: './network start wlan0' > Apr 23 17:01:48 localhost kernel: prism2: wlan0: operating mode changed 3 -> 2 > Apr 23 17:01:48 localhost kernel: ieee80211_crypt: registered algorithm 'WEP' > Apr 23 17:01:48 localhost kernel: wifi0: CMD=0x0121 => res=0x7f, resp0=0x0004 > Apr 23 17:01:48 localhost kernel: wifi0: hfa384x_set_rid: > CMDCODE_ACCESS_WRITE failed (res=127, rid=fc24, len=14) > Apr 23 17:01:48 localhost kernel: Could not set key 0 (len=14) > Apr 23 17:01:48 localhost kernel: wifi0: encryption setup failed > Apr 23 17:01:48 localhost kernel: wlan0: set_encryption failed > Apr 23 17:01:48 localhost cardmgr[3609]: + iwconfig wlan0 key s:123456789AB > [1] > Apr 23 17:01:48 localhost cardmgr[3609]: + Error for wireless request "Set > Encode" (8B2A) : > Apr 23 17:01:48 localhost cardmgr[3609]: + SET failed on device wlan0 ; > Invalid argument. Ich lese das so, dass der WEP-Key nicht gesetzt werden kann und noch so einiges anderes schief geht. Hat jemand einen Tipp, was genau falsch läuft? Gruß, Marcus