Hallo Thorsten,
Thorsten Haude wrote: > Moin, > > * Karl Pech wrote (2006-09-01 09:10): >>Christoph Haas wrote: >> >>> Was ergibt "echo $DISPLAY"? Es sollte z.B. "localhost:10.0" sein. >> >>Wenn ich auf meinem Rechner dies eingebe, erhalte ich als Ausgabe: >> >>### >>:0.0 >>### >> >>sehr verdächtig ... . Ist das letztlich die Fehlerquelle? > > Nicht wirklich die Quelle, aber vielleicht ein Hinweis. Leider hast Du > uns immer noch nicht verraten, wie die beteiligten Hosts wirklich > heißen, sonst könnten wir mehr sagen. Ich versuche eine über ssh getunnelte X-Verbindung zum Rechner zeus.cs.uni-bonn.de aufzubauen, und das funktioniert leider nicht. Ich bekomme folgende debug-Ausgabe: ### [EMAIL PROTECTED]:~$ ssh -v -v -v -Y [EMAIL PROTECTED] OpenSSH_3.8.1p1 Debian-8.sarge.4, OpenSSL 0.9.7e 25 Oct 2004 debug1: Reading configuration data /etc/ssh/ssh_config debug2: ssh_connect: needpriv 0 debug1: Connecting to zeus.cs.uni-bonn.de [131.220.4.23] port 22. debug1: Connection established. debug1: identity file /home/karl/.ssh/identity type -1 debug1: identity file /home/karl/.ssh/id_rsa type -1 debug1: identity file /home/karl/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_3.9p1 debug1: match: OpenSSH_3.9p1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_3.8.1p1 Debian-8.sarge.4 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc, [EMAIL PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc, [EMAIL PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-96, hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-96, hmac-md5-96 debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1, diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc, [EMAIL PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc, [EMAIL PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-96, hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-96, hmac-md5-96 debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_init: found hmac-md5 debug1: kex: server->client aes128-cbc hmac-md5 none debug2: mac_init: found hmac-md5 debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 127/256 debug2: bits set: 494/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: filename /home/karl/.ssh/known_hosts debug3: check_host_in_hostfile: match line 1 debug3: check_host_in_hostfile: filename /home/karl/.ssh/known_hosts debug3: check_host_in_hostfile: match line 1 debug1: Host 'zeus.cs.uni-bonn.de' is known and matches the RSA host key. debug1: Found key in /home/karl/.ssh/known_hosts:1 debug2: bits set: 501/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/karl/.ssh/identity ((nil)) debug2: key: /home/karl/.ssh/id_rsa ((nil)) debug2: key: /home/karl/.ssh/id_dsa ((nil)) debug1: Authentications that can continue: publickey,password,keyboard-interactive debug3: start over, passed a different list publickey,password,keyboard-interactive debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/karl/.ssh/identity debug3: no such identity: /home/karl/.ssh/identity debug1: Trying private key: /home/karl/.ssh/id_rsa debug3: no such identity: /home/karl/.ssh/id_rsa debug1: Trying private key: /home/karl/.ssh/id_dsa debug3: no such identity: /home/karl/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup keyboard-interactive debug3: remaining preferred: password debug3: authmethod_is_enabled keyboard-interactive debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug1: Authentications that can continue: publickey,password,keyboard-interactive debug3: userauth_kbdint: disable: no info_req_seen debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: debug3: authmethod_is_enabled password debug1: Next authentication method: password [EMAIL PROTECTED]'s password: debug3: packet_send2: adding 48 (len 61 padlen 19 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Entering interactive session. debug2: callback start debug2: ssh_session2_setup: id 0 debug2: channel 0: request pty-req debug3: tty_make_modes: ospeed 38400 debug3: tty_make_modes: ispeed 38400 debug3: tty_make_modes: 1 3 debug3: tty_make_modes: 2 28 debug3: tty_make_modes: 3 127 debug3: tty_make_modes: 4 21 debug3: tty_make_modes: 5 4 debug3: tty_make_modes: 6 0 debug3: tty_make_modes: 7 0 debug3: tty_make_modes: 8 17 debug3: tty_make_modes: 9 19 debug3: tty_make_modes: 10 26 debug3: tty_make_modes: 12 18 debug3: tty_make_modes: 13 23 debug3: tty_make_modes: 14 22 debug3: tty_make_modes: 18 15 debug3: tty_make_modes: 30 0 debug3: tty_make_modes: 31 0 debug3: tty_make_modes: 32 0 debug3: tty_make_modes: 33 0 debug3: tty_make_modes: 34 0 debug3: tty_make_modes: 35 0 debug3: tty_make_modes: 36 1 debug3: tty_make_modes: 37 0 debug3: tty_make_modes: 38 0 debug3: tty_make_modes: 39 0 debug3: tty_make_modes: 40 0 debug3: tty_make_modes: 41 0 debug3: tty_make_modes: 50 1 debug3: tty_make_modes: 51 1 debug3: tty_make_modes: 52 0 debug3: tty_make_modes: 53 1 debug3: tty_make_modes: 54 1 debug3: tty_make_modes: 55 1 debug3: tty_make_modes: 56 0 debug3: tty_make_modes: 57 0 debug3: tty_make_modes: 58 0 debug3: tty_make_modes: 59 1 debug3: tty_make_modes: 60 1 debug3: tty_make_modes: 61 1 debug3: tty_make_modes: 62 0 debug3: tty_make_modes: 70 1 debug3: tty_make_modes: 71 0 debug3: tty_make_modes: 72 1 debug3: tty_make_modes: 73 0 debug3: tty_make_modes: 74 0 debug3: tty_make_modes: 75 0 debug3: tty_make_modes: 90 1 debug3: tty_make_modes: 91 1 debug3: tty_make_modes: 92 0 debug3: tty_make_modes: 93 0 debug2: x11_get_proto: /usr/bin/X11/xauth list :0.0 . 2>/dev/null debug1: Requesting X11 forwarding with authentication spoofing. debug2: channel 0: request x11-req debug1: Requesting authentication agent forwarding. debug2: channel 0: request [EMAIL PROTECTED] debug2: channel 0: request shell debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel 0: rcvd adjust 131072 Last login: Sat Sep 2 10:08:19 2006 from p5088dce6.dip.t-dialin.net pech has logged on pts/0 from p5088dce6. zeus: stud/pech% xev& [1] 10759 zeus: stud/pech% xev: unable to open display 'p5088dce6.dip.t-dialin.net:0.0' [1] Exit 1 xev zeus: stud/pech% logout debug2: channel 0: rcvd eof debug2: channel 0: output open -> drain debug2: channel 0: obuf empty debug2: channel 0: close_write debug2: channel 0: output drain -> closed debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug2: channel 0: rcvd close debug2: channel 0: close_read debug2: channel 0: input open -> closed debug3: channel 0: will not send data after close debug2: channel 0: almost dead debug2: channel 0: gc: notify user debug2: channel 0: gc: user detached debug2: channel 0: send close debug2: channel 0: is dead debug2: channel 0: garbage collecting debug1: channel 0: free: client-session, nchannels 1 debug3: channel 0: status: The following connections are open: #0 client-session (t4 r0 i3/0 o3/0 fd -1/-1) debug3: channel 0: close_fds r -1 w -1 e 6 Connection to zeus.cs.uni-bonn.de closed. debug1: Transferred: stdin 0, stdout 0, stderr 43 bytes in 13.3 seconds debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 3.2 debug1: Exit status 0 [EMAIL PROTECTED]:~$ ### Na ja, ich vermute mal, daß dieses X-Problem seinen Ursprung nicht bei 'zeus' hat, weil es ja immerhin ein Uni-System ist, und deshalb professionell konfiguriert ist (siehe auch http://web.informatik.uni-bonn.de/DV/dienste/remotelogin/remotelogin.html). Im Übrigen funktioniert es ja bei cygwin. Das Problem kann also nur auf der Client-Seite, also bei mir liegen. Nur wo? :-( Danke für die Hilfe! Viele Grüße Karl -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)