Am Thu, 21 Sep 2006 08:49:35 +0200 schrieb Stefan Bauer: Hallo,
> Kernel 2.6.8.2 ? debian stable ? 2.6.16-2-k7, deian testing > was sagt smartctl --all /dev/hda sowie auf /dev/hdb ? Das ist viel (Frage: ist es besser, so einen Menge an Info als file anzuhängen? Oder ist das für ne ML nicht gewünscht?) smartctl --all /dev/hda smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: IBM Deskstar 40GV & 75GXP series (all other firmware) Device Model: IBM-DTLA-305040 Serial Number: YJEYJ210370 Firmware Version: TW4OA68A User Capacity: 41.174.138.880 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 5 ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1 Local Time is: Thu Sep 21 09:01:50 2006 CEST ==> WARNING: IBM Deskstar 40GV and 75GXP drives may need upgraded SMART firmware. Please see http://www.geocities.com/dtla_update/ and http://www-3.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-42215 or http://www-1.ibm.com/support/docview.wss?uid=psg1MIGR-42215 SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (2412) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 30) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 060 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 114 114 024 Pre-fail Always - 180 (Average 179) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 1522 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 6 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 4575 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1450 192 Power-Off_Retract_Count 0x0032 099 099 050 Old_age Always - 1522 193 Load_Cycle_Count 0x0012 099 099 050 Old_age Always - 1522 194 Temperature_Celsius 0x0002 137 137 000 Old_age Always - 40 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 6 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 4574 - Device does not support Selective Self Tests/Logging ------------------------------------------------------------------ smartctl --all /dev/hdb smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Western Digital Caviar WDxxxAB series Device Model: WDC WD300AB-00BVA0 Serial Number: WD-WMA7H1963170 Firmware Version: 21.01H21 User Capacity: 30.020.272.128 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 5 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Sep 21 09:03:46 2006 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (1584) seconds. Offline data collection capabilities: (0x3b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 28) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 106 100 021 Pre-fail Always - 3050 4 Start_Stop_Count 0x0032 099 099 040 Old_age Always - 1501 5 Reallocated_Sector_Ct 0x0032 200 200 112 Old_age Always - 0 7 Seek_Error_Rate 0x000b 100 253 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3012 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1425 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging