Hallo,
ich habe das Problem das mein "Home-Server" beim booten die Laufwerke
nicht mehr korrekt moutet sondern wohl nur die "/"-root Partiton
read-only einhängt.
Hier mal ein Teil der "dmesg" Ausgabe:
<schnipp>
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Capability LSM initialized
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: [EMAIL PROTECTED]
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=3188864,
sector=3188857
end_request: I/O error, dev hda, sector 3188857
EXT3-fs error (device hda7): ext3_readdir: directory #64676 contains a
hole at offset 0
Remounting filesystem read-only
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=3188864,
sector=3188857
end_request: I/O error, dev hda, sector 3188857
EXT3-fs error (device hda7): ext3_find_entry: reading directory #64676 offset 0
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=3188864,
sector=3188857
end_request: I/O error, dev hda, sector 3188857
EXT3-fs error (device hda7): ext3_find_entry: reading directory #64676 offset 0
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=3188864,
sector=3188857
end_request: I/O error, dev hda, sector 3188857
EXT3-fs error (device hda7): ext3_find_entry: reading directory #64676 offset 0
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=3188864,
sector=3188857
end_request: I/O error, dev hda, sector 3188857
EXT3-fs error (device hda7): ext3_find_entry: reading directory #64676 offset 0
<schnapp>
meine /etc/fstab:
/dev/hda5 /boot ext3 defaults 0 2
/dev/hda6 /tmp ext3 defaults 0 2
/dev/hda7 / ext3
defaults,errors=remount-ro 0 1
#
/dev/mapper/volume2-home /home ext3 defaults 0 2
/dev/mapper/volume2-opt /opt ext3 defaults 0 2
/dev/mapper/volume2-srv /srv ext3 defaults 0 2
/dev/mapper/volume1-usr /usr ext3 defaults 0 2
/dev/mapper/volume1-var /var ext3 defaults 0 2
#
/dev/hdd /cdrom iso9660 ro,user,noauto 0 0
#
proc /proc proc defaults 0 0
/dev/hda8 none swap sw 0 0
Über diesen Fehler aus dmesg:
<schnipp>
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=3188864,
sector=3188857
end_request: I/O error, dev hda, sector 3188857
<schnapp>
hab ich was gefunden, dass es wohl ein sterben der Festplatte sein könnte.
Deshalb hab ich mal mit kanotix von CD gebootet und smartctl --all
/dev/hda ausgeführt:
smartctl version 5.34 [i686-pc-linux-gnu] Copyright (C) 2002-5 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Medalist 8641 family
Device Model: ST38641A
Serial Number: GR011532
Firmware Version: 3.04
User Capacity: 8.606.545.920 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 4
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Fri Nov 17 09:03:59 2006 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x03) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
No Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SMART Attributes Data Structure revision number: 5
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000a 086 086 000 Old_age
Always - 70667206
3 Spin_Up_Time 0x0006 070 070 000 Old_age
Always - 0
4 Start_Stop_Count 0x0013 099 099 020 Pre-fail
Always - 1142
5 Reallocated_Sector_Ct 0x0013 100 100 036 Pre-fail
Always - 15
7 Seek_Error_Rate 0x000b 070 060 030 Pre-fail
Always - 12913970680
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0013 099 099 020 Pre-fail
Always - 1333
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age
Always - 6
Warning: device does not support Error Logging
Error SMART Error Log Read failed: Eingabe-/Ausgabefehler
Smartctl: SMART Error Log Read Failed
Warning: device does not support Self Test Logging
Error SMART Error Self-Test Log Read failed: Eingabe-/Ausgabefehler
Smartctl: SMART Self Test Log Read Failed
Device does not support Selective Self Tests/Logging
Hat jemand so was schon mal gehabt - geht mir die Platte wirklich hinüber?!
Tschau und Danke für Eure Antworten
Uli
